Development [ROM][OFFICIAL][alioth][13] LineageOS 20 for POCO F3/Mi 11X/Redmi K40

Search This thread

duttyend

Senior Member
Dec 18, 2012
525
403
I have the same problem with the fingerprintscanner.

Installed completely new: boot, vendor boot, LOS20 for Poco F3 global, Mind the GAPPS for android 13 (and just to be sure also copy partitions). Everything works and a fingertprint scan is made (and stored) only to be empty (erased) after a reboot. Reinstalled several times but every time the same problem.

It seems the Trusted Execution Environment is reset after a reboot or something.
The symptoms are similar to those you get when using an incompatible firmware. Try with another firmware from the recommended ones (for example, try EEA instead of Global)
 

anarchyz

Member
Jan 11, 2016
6
1
Hi, i just update (Poco F3) from LOS 19.1 to LOS 20 via adb sideload. Right now i cant use my phone, and what I've tried
1. Upgrade to LOS 20 via adb sideload without any GApps, phone boot up normally, install play store from apkpure but cant run it all. It keeps crashing.
2. Upgrade to LOS 20 via adb sideload and used GApps pico (Android 11) -> bootloop
3. Upgrade to LOS 20 via adb sideload and used MindTheGApps (for android 13), successfully installed and boot up but stuck in Networking page.
3a. Connect to all wifi network -> not succeed , keep trying and then application stop working
3b. Switch to mobile data -> cant find the internet (switches some sim cards already)


Any one can help please?
 

booci

Senior Member
Jan 28, 2009
154
112
Buzau
Hi, i just update (Poco F3) from LOS 19.1 to LOS 20 via adb sideload. Right now i cant use my phone, and what I've tried
1. Upgrade to LOS 20 via adb sideload without any GApps, phone boot up normally, install play store from apkpure but cant run it all. It keeps crashing.
2. Upgrade to LOS 20 via adb sideload and used GApps pico (Android 11) -> bootloop
3. Upgrade to LOS 20 via adb sideload and used MindTheGApps (for android 13), successfully installed and boot up but stuck in Networking page.
3a. Connect to all wifi network -> not succeed , keep trying and then application stop working
3b. Switch to mobile data -> cant find the internet (switches some sim cards already)


Any one can help please?
Have you considered following an official guide? It seems like you don't know what you are doing.
1. If you install without gapps the playstore won't work.
2. OpenGapps is old and does NOT support android 13. Don't know what you were expecting to happen.
3. Stick with the official guides and you should be ok.
 
  • Like
Reactions: Corylus-Core

CHGICEMAN

Senior Member
May 12, 2010
548
210
Samsung Galaxy Tab S3
Xiaomi Mi 9 SE
Hi, i just update (Poco F3) from LOS 19.1 to LOS 20 via adb sideload. Right now i cant use my phone, and what I've tried
1. Upgrade to LOS 20 via adb sideload without any GApps, phone boot up normally, install play store from apkpure but cant run it all. It keeps crashing.
2. Upgrade to LOS 20 via adb sideload and used GApps pico (Android 11) -> bootloop
3. Upgrade to LOS 20 via adb sideload and used MindTheGApps (for android 13), successfully installed and boot up but stuck in Networking page.
3a. Connect to all wifi network -> not succeed , keep trying and then application stop working
3b. Switch to mobile data -> cant find the internet (switches some sim cards already)


Any one can help please?
Have you installed the firmware for Android 13?
 

anarchyz

Member
Jan 11, 2016
6
1
Have you considered following an official guide? It seems like you don't know what you are doing.
1. If you install without gapps the playstore won't work.
2. OpenGapps is old and does NOT support android 13. Don't know what you were expecting to happen.
3. Stick with the official guides and you should be ok.
Thanks for your reply.
I tried to follow the official guide, maybe there was some steps I missed.

Have you installed the firmware for Android 13?
I am coming from LOS 19, is it Android 12?
So I need to update official MIUI Android 13 first before upgrading to LOS 20?
Please correct my understanding :
LOS 19 -> MIUI Android 14 -> LOS 20 ?

Thanks
 

G A S T

Senior Member
Apr 20, 2018
283
116
Xiaomi Mi 4
Samsung Galaxy S6
A
Thanks for your reply.
I tried to follow the official guide, maybe there was some steps I missed.


I am coming from LOS 19, is it Android 12?
So I need to update official MIUI Android 13 first before upgrading to LOS 20?
Please correct my understanding :
LOS 19 -> MIUI Android 14 -> LOS 20 ?

Thanks
No, you don't install full MIUI. Just the extracted firmware package out if it. Go to Xiaomifirmwareupdater.com and download the recommended (from the LOS-Wiki) firmware for your device. Install the new firmware via sideload, when you are in the LOS Recovery and ofc you do that before you sideload LOS 20 and GApps.
 
  • Like
Reactions: CHGICEMAN

anarchyz

Member
Jan 11, 2016
6
1
A

No, you don't install full MIUI. Just the extracted firmware package out if it. Go to Xiaomifirmwareupdater.com and download the recommended (from the LOS-Wiki) firmware for your device. Install the new firmware via sideload, when you are in the LOS Recovery and ofc you do that before you sideload LOS 20 and GApps.

Noted, will give a try tonight.
Many thanks~
 
  • Like
Reactions: G A S T

G A S T

Senior Member
Apr 20, 2018
283
116
Xiaomi Mi 4
Samsung Galaxy S6
My phone came "from factory" with POCO F3 EEA - V14.0.7.0.TKHEUXM, should I try the Global one or would that give me problems?

I thought I could skip this step because my phone already had the right version installed. Not sure if I should try to reinstall that same EEA version.
This is the right one. Don't change to Global when you have a Poco F3 EAA - Device.

LOS 20 will run on top of that without a problem.
 

booci

Senior Member
Jan 28, 2009
154
112
Buzau
My phone came "from factory" with POCO F3 EEA - V14.0.7.0.TKHEUXM, should I try the Global one or would that give me problems?

I thought I could skip this step because my phone already had the right version installed. Not sure if I should try to reinstall that same EEA version.
EEA is for Europe. If you live in Europe stick with EEA. Any other place except China, India, Indonesia, Russia, Taiwan and Turkey, use Global.
 
  • Like
Reactions: Lex_Michdeandroid

booci

Senior Member
Jan 28, 2009
154
112
Buzau
It works fine, but it gets cleared on reboot. Not hardware, just something going on with the procedure or the ROM.
Well there you go. Hardware is fine (you said that), ROM works fine (other users reported it works). Guess the only thing left is the procedure. Take a break, free your mind, start over with patience, you will get there.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Jio 5G not supported!
    checked NR availability by dailing *#*#4636#*#*
    it says NR availibility unknown...
    I did have jio 5G in stock ROM MIUI 14
    Device: MI 11X
    Have you tried to change preferred network type in settings? This happened to me after the instal, the preferred netwotk type was set to: LTE, TD-SCDMA , CDMA,... I changed it to : WORLD and the 5G appeared immediately.
    2
    Have you tried to change preferred network type in settings? This happened to me after the instal, the preferred netwotk type was set to: LTE, TD-SCDMA , CDMA,... I changed it to : WORLD and the 5G appeared immediately.
    You mean 'Global' and not World?
    2
    You mean 'Global' and not World?
    Yes, you're right. My phone is in Spanish, i have "Mundial" as an option in preferred network type, so I thought that World would be the english word for that.
    1
    Hello there,

    I flash my phone to this firmware POCO F3 EEA - V14.0.7.0.TKHEUXM
    Then tried to "fastboot boot twrp-3.7.0_12-0-alioth.img" and it rebooted to the TWRP
    But it failed to mount the partitions:
    '/system_root' (Invalid argument)
    '/vendor' (Invalid argument)

    Could anyone give me a tip?

    EDIT: I have missed this part:
    fastboot flash boot boot.img
    1
    Hey guys,
    First of all, thank you all so much for the work you're all putting in this community.

    I'm encountering the SIM card reboot bug with my new (second hand) F3. After a while, the network disconnects, then the phone restarts, doesn't show any network setting and I need to reboot again for everything to work.

    So from what I've read on this forum, the solution is to flash the right firmware before flashing LOS? I'm not new to flashing ROMs, but I don't really understand the concept of flashing a firmware beforehand.
    So I need to check if my phone is a Global or EEA version using my IMEI, then flash the right firmware, then reflash LOS (no way of fixing this without losing my data, right?)

    So can someone confirm that this famous bug is fixed by doing this, and that it's the correct way of doing it?
    Thanks!
    Uploading the right firmware is key. Simply uploading a firmware will not remove your data from the phone. It's worth doing it with these instructions
    Code:
    https://wiki.lineageos.org/devices/alioth/fw_update/variant1
    I personally having downloaded a newer version of Global. The lineageos website recommends V14.0.4.0.TKHMIXM. In my case, the network continued to disappear and reboots occurred. However, after uploading V14.0.7.0.TKHMIXM, everything works very well. No reboots and network outages. You'll have to see what works for you.
  • 57
    Lineage_OS_Logo.png

    LineageOS is a free, community built, aftermarket firmware distribution of android, which is designed to increase performance and reliability over stock android for your device.

    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.


    GPL compliance:
    Working:
    • Camera (and flashlight)
    • Mobile Data (4G/5G)
    • WiFi
    • Bluetooth
    • Telephony (VoLTE/VoWifi)
    • Audio (Record and Playback)
    • Video Playback
    • Sensors
    • GPS
    • NFC (Except aliothin)
    Bugs:
    • Nothing (?)

    Downloads:

    Wiki:

    Note:
    • Must follow installation wiki for this device.
    • GApps can only be flashed on clean installs.
    • Formatting data (all user data is wiped, including internal storage) is a must if MIUI was previously installed and device was encrypted.
    • No custom kernels are supported in this thread. Only stock kernel and official builds will be supported.
    • Flashing LineageOS through custom recovery is not supported and not advised.
      • For recovery you must flash vendor_boot.img and boot.img
    Bug reports:
    • DO NOT report bugs if you're running a custom kernel, recovery or Xposed or Magisk mods.
    • Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.).
    • Report bugs here: https://wiki.lineageos.org/how-to/bugreport#reporting-a-bug

    Credits & collaborations:
    All LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!

    Support:
    XDA is preferred for main discussion. But if you need any unofficial support then check this group. We strongly discourage direct contact with any devs through social media.

    Credits :

    @SebaUbuntu

    @Sahil_Sonar


    DONATIONS : Paypal
    20

    SafetyNet


    By default LineageOS doesn't pass SafetyNet, why?, Check here https://lineageos.org/Safetynet

    You can use this unofficial method to pass SafetyNet (Not for rooted users):
    ih8sn
    16
    LineageOS 20.0 based on android 13 is out. Enjoy 🎉
    15
    LineageOS 19.1 official build is out

    Make sure follow steps before upgrading to lineage-19.1

    - Follow this fresh install https://wiki.lineageos.org/devices/alioth/install
    - Follow this for upgrade https://wiki.lineageos.org/devices/alioth/upgrade

    - Install Android 12 Gapps after installing rom (if you use)
    - Update firmware to required firmware version MIUI 13.x.x builds (Based on Android 12).
    V13.0.5.0.SKHCNXM 12.0 China
    V13.0.4.0.SKHEUXM 12.0 Europe
    V13.0.4.0.SKHINXM 12.0 India
    V13.0.2.0.SKHMIXM 12.0 Global
    15
    #ih8sn

    - What does this do?

    - Spoof build as a user build (lineage builds are userdebug).
    - Spoof bootloader unlock status.
    - Spoof device as mi 8

    Download from attachments: ih8sn-aarch64.zip

    Note:

    - Spoofing does not stays in ota updates.
    - This method is only for non-rooted users.
    - Use ih8sn-uninstaller.zip to uninstall.