Development [ROM][OFFICIAL][alioth][13] LineageOS 20 for POCO F3/Mi 11X/Redmi K40

Search This thread

JevonsDU

Senior Member
Aug 13, 2016
121
39
Fingerprint issue comes AGAIN after OTA upgrading today build.

My fingerprint profile was removed after upgrading!!
 
Hi!

I encountered a weird error in recovery:
"ERROR: recovery: [libfs_mgr]Unable to enable ext4 verity on /dev/block/by-name/metadata because /system/bin/tune2fs is missing"
Have anone encounered this error? I followed the official guide and booted to rom easily but this error concernes me.
 

Lex_Michdeandroid

Senior Member
Dec 3, 2011
353
71
Asus Transformer TF300T
Slowest update I've ever had on an Android phone... Finalizing package installation takes forever. Anyone else with the same thing?

-edit- After the update it cycles through "charging slowly > charging > not charging > charging slowly > charging > etc" very quickly...

-edit2- Charging problem went away again... Hopefully it was just cosmic background radiation playing with my cables or charger or something...

I did not lose the fingerprint after a reboot.
The picture quality is still very very bad. (On both stock app and Open Camera.)
 
Last edited:

Lex_Michdeandroid

Senior Member
Dec 3, 2011
353
71
Asus Transformer TF300T
hi, I installed LOS 20 recently and the first time I see something like this for the time. For some reason, Google Chrome does not see the Internet connection and Gmail synchronization requests. An account already deleted and authoritively again, did not help. Also after reboot reset fingerprint and i have to configure again. What can i do in this case?

Try to follow every step in this link, it might solve everything. Make sure you use the appropriate region for your phone:


It will not wipe anything from your phone.

Fingerprint issue comes AGAIN after OTA upgrading today build.

My fingerprint profile was removed after upgrading!!

Same goes for you, follow the guide in this link (use the appropriate region for your phone) and see if your fingerprint sticks after reboot:


It will not wipe anything from your phone.

I rebooted my phone today for the update and I still haven't lost any fingerprint... Did you even read the instructions?
Stop acting like a toxic entitled person and actually try to help someone. They might leave with a much better feeling about this community and they might even come back to help others in the future.
 
  • Like
Reactions: rex28818

Emeraldawn

Senior Member
Slowest update I've ever had on an Android phone... Finalizing package installation takes forever. Anyone else with the same thing?

-edit- After the update it cycles through "charging slowly > charging > not charging > charging slowly > charging > etc" very quickly...

-edit2- Charging problem went away again... Hopefully it was just cosmic background radiation playing with my cables or charger or something...

I did not lose the fingerprint after a reboot.
The picture quality is still very very bad. (On both stock app and Open Camera.)
The installation takes longer if your phone has the screen off, for me it takes around 15 minutes with screen on.

I also have the same problem with charging, but it started randomly a few days after installing the update. I have both a 20W and a 33W Anker chargers and the problem only happens with the 33W charger, no idea why. Maybe it's a drivers problem, it worked fine with LOS 19.1.

I think the quality of the stock camera will always be subpar, you can get decent results with GCam, I personally use this version with this config file.
 

renaldofreire

Senior Member
May 27, 2013
51
11
Can anyone use Google Wallet (Pay)? My device is rooted, but I have successfully resolved the restrictions by using MagiskHide Props Config and Universal SafetyNet Fix.

Is there any solution I can attempt to make Google Wallet work? I'm using LOS 20 version.
 

cgb.spender

Senior Member
Dec 6, 2013
64
22
Redmi Note 9 Pro
Xiaomi Poco F3
Can anyone use Google Wallet (Pay)? My device is rooted, but I have successfully resolved the restrictions by using MagiskHide Props Config and Universal SafetyNet Fix.

Is there any solution I can attempt to make Google Wallet work? I'm using LOS 20 version.
Can you confirm Safetynet is actually passing?
If so, try to delete cache and data of wallet and google play
 

Lex_Michdeandroid

Senior Member
Dec 3, 2011
353
71
Asus Transformer TF300T
The installation takes longer if your phone has the screen off, for me it takes around 15 minutes with screen on.

I also have the same problem with charging, but it started randomly a few days after installing the update. I have both a 20W and a 33W Anker chargers and the problem only happens with the 33W charger, no idea why. Maybe it's a drivers problem, it worked fine with LOS 19.1.

I think the quality of the stock camera will always be subpar, you can get decent results with GCam, I personally use this version with this config file.
It's still not saving pictures over 2MB, but the quality is a lot better now! Thanks!

Now my pictures don't look like they were painted with water colors. Or at least at this moment they don't... Maybe tomorrow in different lighting it looks different again. Will try a few different situations.

I still hope the original app will be available soon. But this will do for now.
 
  • Like
Reactions: Emeraldawn

Emeraldawn

Senior Member
It's still not saving pictures over 2MB, but the quality is a lot better now! Thanks!

Now my pictures don't look like they were painted with water colors. Or at least at this moment they don't... Maybe tomorrow in different lighting it looks different again. Will try a few different situations.

I still hope the original app will be available soon. But this will do for now.
As others have reported, currently there's a problem with both the stock camera and third-party apps (GCam used to output files over 8-10 MB). I don't know when it will get fixed but I don't think the stock camera will ever give you better results than GCam.
 

MrTheV

Member
Mar 28, 2011
30
12
Paris
Hello

I switched to LOS 20.0 on my PocoF3 yesterday, coming from LOS19.1
Now, none of my weather apps can get the GPS location. ANd of courses, corresponding widgets are not get the location either.
Google Maps and GPS Status can get the GPS-based location, even in airplane mode.
I tried all I could (delete the cache, uninstallation and reinstallation, setting the "Location" permissions for the apps...), and nothing worked.
Any clue?
Thanks in advance
 

Smultie

Senior Member
Apr 13, 2006
881
347
Hello

I switched to LOS 20.0 on my PocoF3 yesterday, coming from LOS19.1
Now, none of my weather apps can get the GPS location. ANd of courses, corresponding widgets are not get the location either.
Google Maps and GPS Status can get the GPS-based location, even in airplane mode.
I tried all I could (delete the cache, uninstallation and reinstallation, setting the "Location" permissions for the apps...), and nothing worked.
Any clue?
Thanks in advance
Firmware updated exactly as described?
 

mik528

New member
Jun 13, 2023
2
0
i have the same fingerprint issue like above,
my phone always add the addtion magiisk fater the flash room ,is the issue about magisk?
when i not register the fingerprint , i checkd the ro.build.fingerprint info with root ,but that retunn a strings : "Redmi/alioth/alioth:13/TKQ1.220829.002/V14.0.4.0.TKHCNXM:user/release-keys" ,
it looks like a persist fingerprint by rom, i cleared that by manual ,but when i restart system ,i got it again.
someone can help me ?
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Jio 5G not supported!
    checked NR availability by dailing *#*#4636#*#*
    it says NR availibility unknown...
    I did have jio 5G in stock ROM MIUI 14
    Device: MI 11X
    Have you tried to change preferred network type in settings? This happened to me after the instal, the preferred netwotk type was set to: LTE, TD-SCDMA , CDMA,... I changed it to : WORLD and the 5G appeared immediately.
    2
    Have you tried to change preferred network type in settings? This happened to me after the instal, the preferred netwotk type was set to: LTE, TD-SCDMA , CDMA,... I changed it to : WORLD and the 5G appeared immediately.
    You mean 'Global' and not World?
    2
    You mean 'Global' and not World?
    Yes, you're right. My phone is in Spanish, i have "Mundial" as an option in preferred network type, so I thought that World would be the english word for that.
    1
    If anyone happens to be on Public Mobile in Canada and have trouble sending MMS messages, the built in APN settings in the rom are incorrect/outdated and seem to have proliferated all over the internet, so most roms have the wrong ones included.

    These are correct:
    • MMS proxy: mmscproxy.mobility.ca
    • MMS port: 8799
    The included ones that didn't work for me:
    • MMS proxy: 74.49.0.18
    • MMS port: 80
    Other entries are the same, since Koodo and Public are both just Telus MVNOs.
    I should have run into that issue long before now, but I rarely use MMS -- and neither should you. :ROFLMAO: Once in a while you'll find someone who doesn't have RCS turned on.

    Edit: Yeah they changed the IP again -- that URL used to point to that IP but now it points to their other MMS server (209.202.119.4). So the rom should have the IP address swapped out for the URL so it can be dynamic. Port doesn't really matter, either 80 or 8799 should work, but they seem to recommend the latter on Telus/Koodo/PM support sites.
    1
    Hello there,

    I flash my phone to this firmware POCO F3 EEA - V14.0.7.0.TKHEUXM
    Then tried to "fastboot boot twrp-3.7.0_12-0-alioth.img" and it rebooted to the TWRP
    But it failed to mount the partitions:
    '/system_root' (Invalid argument)
    '/vendor' (Invalid argument)

    Could anyone give me a tip?

    EDIT: I have missed this part:
    fastboot flash boot boot.img
  • 57
    Lineage_OS_Logo.png

    LineageOS is a free, community built, aftermarket firmware distribution of android, which is designed to increase performance and reliability over stock android for your device.

    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.


    GPL compliance:
    Working:
    • Camera (and flashlight)
    • Mobile Data (4G/5G)
    • WiFi
    • Bluetooth
    • Telephony (VoLTE/VoWifi)
    • Audio (Record and Playback)
    • Video Playback
    • Sensors
    • GPS
    • NFC (Except aliothin)
    Bugs:
    • Nothing (?)

    Downloads:

    Wiki:

    Note:
    • Must follow installation wiki for this device.
    • GApps can only be flashed on clean installs.
    • Formatting data (all user data is wiped, including internal storage) is a must if MIUI was previously installed and device was encrypted.
    • No custom kernels are supported in this thread. Only stock kernel and official builds will be supported.
    • Flashing LineageOS through custom recovery is not supported and not advised.
      • For recovery you must flash vendor_boot.img and boot.img
    Bug reports:
    • DO NOT report bugs if you're running a custom kernel, recovery or Xposed or Magisk mods.
    • Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.).
    • Report bugs here: https://wiki.lineageos.org/how-to/bugreport#reporting-a-bug

    Credits & collaborations:
    All LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!

    Support:
    XDA is preferred for main discussion. But if you need any unofficial support then check this group. We strongly discourage direct contact with any devs through social media.

    Credits :

    @SebaUbuntu

    @Sahil_Sonar


    DONATIONS : Paypal
    20

    SafetyNet


    By default LineageOS doesn't pass SafetyNet, why?, Check here https://lineageos.org/Safetynet

    You can use this unofficial method to pass SafetyNet (Not for rooted users):
    ih8sn
    16
    LineageOS 20.0 based on android 13 is out. Enjoy 🎉
    15
    LineageOS 19.1 official build is out

    Make sure follow steps before upgrading to lineage-19.1

    - Follow this fresh install https://wiki.lineageos.org/devices/alioth/install
    - Follow this for upgrade https://wiki.lineageos.org/devices/alioth/upgrade

    - Install Android 12 Gapps after installing rom (if you use)
    - Update firmware to required firmware version MIUI 13.x.x builds (Based on Android 12).
    V13.0.5.0.SKHCNXM 12.0 China
    V13.0.4.0.SKHEUXM 12.0 Europe
    V13.0.4.0.SKHINXM 12.0 India
    V13.0.2.0.SKHMIXM 12.0 Global
    15
    #ih8sn

    - What does this do?

    - Spoof build as a user build (lineage builds are userdebug).
    - Spoof bootloader unlock status.
    - Spoof device as mi 8

    Download from attachments: ih8sn-aarch64.zip

    Note:

    - Spoofing does not stays in ota updates.
    - This method is only for non-rooted users.
    - Use ih8sn-uninstaller.zip to uninstall.