[ROM][OFFICIAL][Android 10]ScorpionROM v3.x[Google Pixel 3/XL][Crosshatch/Blueline]

Search This thread

vibsOveebs

Senior Member
Feb 4, 2012
53
24
MALVERN
Got a replacement device running Android 9.0

I am unable to boot the bootJuly.img. I am on an unlocked bootloader on crosshatch and rooted running stock 9.0 out of the box.

What additional steps am I missing?
 
  • Like
Reactions: fratletimac

NepoRood

Recognized Contributor / Retired Forum Moderator
Jan 26, 2016
2,940
3,915
Bugtussle
ROM Update!

The update to v3.5 adds the August Security Patch, overall ROM improvements and some device/kernel improvements, see change log(s) below.

If you're already running Scorpion, just follow the directions under "Updating".
Please, do a clean install if you run into any problems, sometimes "Dirty flashing" causes jank...

The OP will be updated following this post.

Downloads:
*Note(s): Check the upload and build dates for the proper downloads, also, our download site has changed a bit...
crosshatch
blueline


(These instructions are from Linux, which is what I use. You may need to make adjustments to the commands if using Windows)

First Time Installation:
*Note: Make sure you are coming from August stock firmware
1) Download the ROM.zip and the boot.img from above
2) Plug the device into a PC and open a terminal
3) adb reboot bootloader
4) fastboot flash boot boot.img --slot all
5) fastboot reboot-bootloader
6) Using the device volume buttons, select Recovery Mode
7) Go to Wipe data/factory reset and confirm the wipe
8) When it's done, select Apply update from ADB (This will allow you to sideload the ROM.zip)
9) adb sideload S*.zip
10) Reboot


Updating:
1) Download the ROM.zip from above (and boot image for root, if needed)
2) Plug the device into a PC and open a terminal
3) adb reboot recovery
4) Select Apply update from ADB (This will allow you to sideload the ROM zip)
5) adb sideload S*.zip
6) Reboot


For both installs, IF you want root, patch the provided boot image with Magisk Manager and flash it with fastboot


ROM Changelog:
August Security Patches
Various other fixes/improvements

For a complete list of changes, look to our Gerrit or Github Org

Device Changelog:
Updated Kernel (4.9.232)
 

twcobra

Senior Member
Have you looked into battery replacement?

Yes but with the new job I have had very little time to perform surgery on my phone. Plus I wanted that 5g lol. So I picked up a OP8 pro. It's not a Pixel but it is one hell of a beast. Plus I really doubted that Google would put in a in screen finger print sensor. A real cool feature. Slightly on the slow side but works very well.
 

NepoRood

Recognized Contributor / Retired Forum Moderator
Jan 26, 2016
2,940
3,915
Bugtussle
Yes but with the new job I have had very little time to perform surgery on my phone. Plus I wanted that 5g lol. So I picked up a OP8 pro. It's not a Pixel but it is one hell of a beast. Plus I really doubted that Google would put in a in screen finger print sensor. A real cool feature. Slightly on the slow side but works very well.

Oh nice, Scorpion for that device is being worked on :good:
 
  • Like
Reactions: fratletimac

razifibrahim92

New member
Nov 6, 2012
4
1
kulai
ASUS ROG Phone 3
hi am i the only one facing this.. happen everytime i try to change live wallpaper..
 

Attachments

  • Screenshot_20200815-001739_Live_Wallpaper_Picker.png
    Screenshot_20200815-001739_Live_Wallpaper_Picker.png
    82 KB · Views: 159
  • Like
Reactions: fratletimac

NepoRood

Recognized Contributor / Retired Forum Moderator
Jan 26, 2016
2,940
3,915
Bugtussle
ROM Update!

This update adds the Pulse feature, we removed the previous Visualizer code, everything is now under: Settings/Sound/Pulse
Also fixed the Live Wallpapers FC :good:

If you're already running Scorpion, just follow the directions under "Updating".
Please, do a clean install if you run into any problems, sometimes "Dirty flashing" causes jank...

The OP will be updated following this post.

Downloads:
*Note(s): Check the upload and build dates for the proper downloads
crosshatch
blueline

(These instructions are from Linux, which is what I use. You may need to make adjustments to the commands if using Windows)

First Time Installation:
*Note: Make sure you are coming from August stock firmware
1) Download the ROM.zip and the boot.img from above
2) Plug the device into a PC and open a terminal
3) adb reboot bootloader
4) fastboot flash boot boot.img --slot all
5) fastboot reboot-bootloader
6) Using the device volume buttons, select Recovery Mode
7) Go to Wipe data/factory reset and confirm the wipe
8) When it's done, select Apply update from ADB (This will allow you to sideload the ROM.zip)
9) adb sideload S*.zip
10) Reboot


Updating:
1) Download the ROM.zip from above (and boot image for root, if needed)
2) Plug the device into a PC and open a terminal
3) adb reboot recovery
4) Select Apply update from ADB (This will allow you to sideload the ROM zip)
5) adb sideload S*.zip
6) Reboot


For both installs, IF you want root, patch the provided boot image with Magisk Manager and flash it with fastboot


ROM Changelog:
Added Pulse
Fix for Live Wallpapers

For a complete list of changes, look to our Gerrit or Github Org
 
Last edited:

NepoRood

Recognized Contributor / Retired Forum Moderator
Jan 26, 2016
2,940
3,915
Bugtussle
ROM Update!

The update to v3.6 adds a couple of new features for status bar clock and kernel improvements, see change log(s) below.
As of now, there is no September patches because of the release of Android 11.

This will also likely be the last build I do for Blueline, it's just not getting any love.

If you're already running Scorpion, just follow the directions under "Updating".
Please, do a clean install if you run into any problems, sometimes "Dirty flashing" causes jank...

The OP will be updated following this post.

Downloads:
*Note(s): Check the upload and build dates for the proper downloads
crosshatch
blueline


(These instructions are from Linux, which is what I use. You may need to make adjustments to the commands if using Windows)

First Time Installation:
*Note: Make sure you are coming from August stock firmware
1) Download the ROM.zip and the boot.img from above
2) Plug the device into a PC and open a terminal
3) adb reboot bootloader
4) fastboot flash boot boot.img --slot all
5) fastboot reboot-bootloader
6) Using the device volume buttons, select Recovery Mode
7) Go to Wipe data/factory reset and confirm the wipe
8) When it's done, select Apply update from ADB (This will allow you to sideload the ROM.zip)
9) adb sideload S*.zip
10) Reboot


Updating:
1) Download the ROM.zip from above (and boot image for root, if needed)
2) Plug the device into a PC and open a terminal
3) adb reboot recovery
4) Select Apply update from ADB (This will allow you to sideload the ROM zip)
5) adb sideload S*.zip
6) Reboot


For both installs, IF you want root, patch the provided boot image with Magisk Manager and flash it with fastboot


ROM Changelog:
Status bar clock "show" seconds
Status bar clock position (Center*/Left/Right)

*For "center" clock, you need to go into Developer Options and set Display cutout to "Hide"

For a complete list of changes, look to our Gerrit or Github Org

Device Changelog:
Updated Kernel (4.9.235)
Clang 11.0.4
 

ldq2806

Member
Jul 15, 2015
11
1
can anyone give me the link to download v3.x for px3 blueline please?
i don't like android 11 because of its bubble chat.... so i think i should come back to android 10 with this rom....
thank you so much...
 

NepoRood

Recognized Contributor / Retired Forum Moderator
Jan 26, 2016
2,940
3,915
Bugtussle
can anyone give me the link to download v3.x for px3 blueline please?
i don't like android 11 because of its bubble chat.... so i think i should come back to android 10 with this rom....
thank you so much...
There aren't any v3.x builds on our server, just so you know
 

Top Liked Posts

  • There are no posts matching your filters.
  • 20
    scorp_logo1.png

    Feel The Sting!

    Since we have no working TWRP for the Pixel 3/XL, we have to flash with our own "stock" recovery. In the download section below, you will find a boot image and the ROM zip. You need to download both and follow the install instructions.


    ** GApps are included in the ROM **

    Downloads:
    Crosshatch

    Blueline

    Installation:
    For First Time Install, you must clean flash! Check the upload date, this will let you know which factory image you need to be on before flashing your device.

    1) Plug the device into a PC and open a terminal
    2) adb reboot bootloader
    3) fastboot flash boot boot.img --slot all
    4) fastboot reboot-bootloader
    5) Using the device volume buttons, select Recovery Mode
    6) Go to Wipe data/factory reset and confirm the wipe
    7) When it's done, select Apply update from ADB (This will allow you to sideload the ROM zip)
    8) adb sideload the_rom.zip
    Code:
    # Example (using a [I]Wildcard[/I] shortcut)
    adb sideload S*.zip
    9) Reboot system
    10) :cool:


    Kernel Source:
    Bluecross Kernel


    XDA:DevDB Information
    ScorpionROM, ROM for the Google Pixel 3 XL

    Contributors
    NepoRood, dabug123
    Source Code: https://github.com/ScorpionRom

    ROM OS Version: Android 10
    ROM Kernel: Linux 4.x
    Based On: AOSP, ABC, DU

    Version Information
    Status: Stable
    Current Stable Version: v3.x
    Stable Release Date: 2020-01-11
    Current Beta Version: v3.0
    Beta Release Date: 2019-12-20

    Created 2019-12-20
    Last Updated 2020-08-05
    17
    Additional Info

    This rom is not meant to be the most feature filled, nor do we claim it is the fastest, or most streamlined. This is just a fun project for us to release our daily irritability.

    Features:

    Display Settings:
    Pulse Audio Equalizer
    QS panel:
    -Quick pulldown
    -QS background
    -QS rows and columns
    "R" Style notification headers
    *Status bar
    -Network traffic
    -Battery Styles
    -Position Clock (Center/Left/Right)
    -Show clock seconds
    Lockscreen Weather
    Lockscreen tweaks:
    -Clock styles
    -Show/Hide lock icon
    -Now Playing
    -Media art
    -Always on when charging

    Gestures:
    Active Edge (Squeeze)
    Activate the Torch w/Power button
    Full Screen Gesture navigation
    Custom Gesture actions


    Power Menu:
    Advanced Power menu (Restart, Recovery, Bootloader, SystemUI)
    Screenshot/Partial Screenshot
    Screen Record

    Other Stuff:
    DU-Themes (Accents, Fonts, and Statusbar)
    Pixel Stand Support
    Next Generation Assistant (Pixel 4 series only)
    Charging animation


    Join us on Telegram for the latest news and discussion: Link

    Credits:
    (In alphabetical order)
    @ezio84
    @Mazda
    @NYCHitman1
    @Surge1223
    The hard working teams at ABC and DU
    And anyone I forgot...
    14
    ROM Update!

    This update adds some cool new features, along with ROM and kernel improvements, see change log(s) below.

    If you're already running Scorpion, just follow the directions under "Updating".
    Please, do a clean install if you run into any problems, sometimes "Dirty flashing" causes jank...

    The OP will be updated following this post.

    Downloads:
    *Note(s): Check the upload and build dates for the proper downloads
    crosshatch
    blueline


    (These instructions are from Linux, which is what I use. You may need to make adjustments to the commands if using Windows)

    First Time Installation:
    *Note: Make sure you are coming from February stock firmware
    1) Download the ROM.zip and the bootFeb1.img from above
    2) Plug the device into a PC and open a terminal
    3) adb reboot bootloader
    4) fastboot flash boot boot.img --slot all
    5) fastboot reboot-bootloader
    6) Using the device volume buttons, select Recovery Mode
    7) Go to Wipe data/factory reset and confirm the wipe
    8) When it's done, select Apply update from ADB (This will allow you to sideload the ROM.zip)
    9) adb sideload ROM.zip
    10) Reboot


    Updating:
    1) Download the ROM.zip from above (and boot image for root, if needed)
    2) Plug the device into a PC and open a terminal
    3) adb reboot recovery
    4) Select Apply update from ADB (This will allow you to sideload the ROM zip)
    5) adb sideload ROM.zip
    6) Reboot


    For both installs, IF you want root, patch the provided boot image with Magisk Manager and flash it with fastboot


    ROM Changelog:
    New default wallpaper
    "Hide the Pill" in full screen gestures
    Long swipe back to kill app
    Pixel Launcher added
    Gboard added
    New Active Edge options
    - Partial Screenshot
    - Custom App actions
    Deep sleep time in About phone
    Animated logo in About phone
    Lockscreen Weather improvements
    Network Traffic improvements
    Various fixes/improvements to frameworks


    Device Changelog:
    Updated Kernel (4.9.214)
    12
    Anyone having issues with wireless charging/Dreamliner? I believe it was working at some point but now it doesn't say its rapid charging anymore for me. When on the charger, it does do the pixel stand stuff, pictures, acting like a google home..etc.. but doesn't say or do "charging rapidly."

    Just cleaned installed latest ROM 1 week ago.

    Could be missing some updates, I don't have a Pixel stand, so no way to test. I'll try to get a new March build out tomorrow, maybe that will help.

    That being said, sorry for the delay this month people, been a lot going on with real life problems. I've been swamped at work and I'm just plain tired. I have all the March stuff merged into source, and a few other things ;)

    Hopefully, tomorrow, I'll get some builds uploaded...
    11
    ROM Update!

    Scorpion v3.1 adds the March security patches and some new features, along with ROM and kernel improvements, see change log(s) below.

    If you're already running Scorpion, just follow the directions under "Updating".
    Please, do a clean install if you run into any problems, sometimes "Dirty flashing" causes jank...

    The OP will be updated following this post.

    Downloads:
    *Note(s): Check the upload and build dates for the proper downloads
    crosshatch
    blueline


    (These instructions are from Linux, which is what I use. You may need to make adjustments to the commands if using Windows)

    First Time Installation:
    *Note: Make sure you are coming from March stock firmware
    1) Download the ROM.zip and the bootMar.img from above
    2) Plug the device into a PC and open a terminal
    3) adb reboot bootloader
    4) fastboot flash boot boot.img --slot all
    5) fastboot reboot-bootloader
    6) Using the device volume buttons, select Recovery Mode
    7) Go to Wipe data/factory reset and confirm the wipe
    8) When it's done, select Apply update from ADB (This will allow you to sideload the ROM.zip)
    9) adb sideload ROM.zip
    10) Reboot


    Updating:
    1) Download the ROM.zip from above (and boot image for root, if needed)
    2) Plug the device into a PC and open a terminal
    3) adb reboot recovery
    4) Select Apply update from ADB (This will allow you to sideload the ROM zip)
    5) adb sideload ROM.zip
    6) Reboot


    For both installs, IF you want root, patch the provided boot image with Magisk Manager and flash it with fastboot


    ROM Changelog:
    March Security patches
    Theme backup and restore
    Theme scheduling
    Various fixes/improvements to frameworks


    Device Changelog:
    Updated Kernel (4.9.215)