[ROM][OFFICIAL][Android 11]ScorpionROM v4.x[Google Pixel 3/XL][Blueline/Crosshatch]

Search This thread

ReyStunner

Senior Member
Apr 7, 2013
128
25
To update magisk with this rom, would I use the direct method or keep patching the boot file from the first post?
 

NepoRood

Recognized Contributor / Retired Forum Moderator
Jan 26, 2016
2,940
3,915
Bugtussle
ROM Update! (y)


This update to v4.5 adds some new features and kernel improvements, see change log(s) below.

If you're already running Scorpion, just follow the directions under "Updating".
Please, do a clean install if you run into any problems, sometimes "Dirty flashing" causes jank...

The OP will be updated following this post.

Downloads:
*Note(s): Check the upload and build dates for the proper downloads
crosshatch
blueline


(These instructions are from Linux, which is what I use. You may need to make adjustments to the commands if using Windows)

First Time Installation:
*Note: Make sure you are coming from May stock firmware
1) Download the ROM.zip and the boot.img from above
2) Plug the device into a PC and open a terminal
3) adb reboot bootloader
4) fastboot flash boot boot.img --slot all
5) fastboot reboot-bootloader
6) Using the device volume buttons, select Recovery Mode
7) Go to Wipe data/factory reset and confirm the wipe
8) When it's done, select Apply update from ADB (This will allow you to sideload the ROM.zip)
9) adb sideload S*.zip
10) Reboot


Updating:
1) Download the ROM.zip from above (and boot image for root, if needed)
2) Plug the device into a PC and open a terminal
3) adb reboot recovery
4) Select Apply update from ADB (This will allow you to sideload the ROM zip)
5) adb sideload S*.zip
6) Reboot


For both installs, IF you want root, patch the provided boot image with Magisk Manager and flash it with fastboot


ROM Changelog:
May security patch
QS Panel opacity improvements
Sensor blocking
Radio info (tap for *#*#4636#*#*)
Various improvements to frameworks


For a complete list of changes, look to our Gerrit or Github Org

Device Changelog:
Updated SRX Kernel (4.9.268)
 

NepoRood

Recognized Contributor / Retired Forum Moderator
Jan 26, 2016
2,940
3,915
Bugtussle
ROM Update! (y)


This update to v4.6 adds some new features and kernel improvements, see change log(s) below.

If you're already running Scorpion, just follow the directions under "Updating".
Please, do a clean install if you run into any problems, sometimes "Dirty flashing" causes jank...

The OP will be updated following this post.

Downloads:
*Note(s): Check the upload and build dates for the proper downloads
crosshatch
blueline


(These instructions are from Linux, which is what I use. You may need to make adjustments to the commands if using Windows)

First Time Installation:
*Note: Make sure you are coming from June stock firmware
1) Download the ROM.zip and the boot.img from above
2) Plug the device into a PC and open a terminal
3) adb reboot bootloader
4) fastboot flash boot boot.img --slot all
5) fastboot reboot-bootloader
6) Using the device volume buttons, select Recovery Mode
7) Go to Wipe data/factory reset and confirm the wipe
8) When it's done, select Apply update from ADB (This will allow you to sideload the ROM.zip)
9) adb sideload S*.zip
10) Reboot


Updating:
1) Download the ROM.zip from above (and boot image for root, if needed)
2) Plug the device into a PC and open a terminal
3) adb reboot recovery
4) Select Apply update from ADB (This will allow you to sideload the ROM zip)
5) adb sideload S*.zip
6) Reboot


For both installs, IF you want root, patch the provided boot image with Magisk Manager and flash it with fastboot


ROM Changelog:
June security patch
Face Unlock added
Blur improvement
Various improvements to frameworks


For a complete list of changes, look to our Gerrit or Github Org

Device Changelog:
Updated SRX Kernel (4.9.273)
 

savaytse66

Senior Member
Oct 8, 2009
104
29
Wondering if anyone has had trouble dirty flashing the June update. A clean flash is obviously my next step, but after dirty flashing the update twice, I get through the Scorpion flash screens, then the phone reboots back to the 5/04 ROM.

Thanks for the continued support of this great ROM.
 

NepoRood

Recognized Contributor / Retired Forum Moderator
Jan 26, 2016
2,940
3,915
Bugtussle
Wondering if anyone has had trouble dirty flashing the June update. A clean flash is obviously my next step, but after dirty flashing the update twice, I get through the Scorpion flash screens, then the phone reboots back to the 5/04 ROM.

Thanks for the continued support of this great ROM.
I didn't have any issues, I usually always flash dirty
 

NepoRood

Recognized Contributor / Retired Forum Moderator
Jan 26, 2016
2,940
3,915
Bugtussle
any feature hide notch with rounded on corner?
I'm not really sure what you are getting at, however, all of our "features" are located in Settings app. We don't use a special tweak type of app, we put things in Settings where they belong (our opinion anyway, lol)

If you're looking for something in particular, I suggest using the search menu in Settings. It will either take you right where you want to go, or we don't have that feature
 
  • Like
Reactions: leaveNOW

NepoRood

Recognized Contributor / Retired Forum Moderator
Jan 26, 2016
2,940
3,915
Bugtussle
ROM Update! (y)


This update to v4.7 adds some new features and kernel improvements, see change log(s) below.

If you're already running Scorpion, just follow the directions under "Updating".
Please, do a clean install if you run into any problems, sometimes "Dirty flashing" causes jank...

The OP will be updated following this post.

Downloads:
*Note(s): Check the upload and build dates for the proper downloads
crosshatch
blueline


(These instructions are from Linux, which is what I use. You may need to make adjustments to the commands if using Windows)

First Time Installation:
*Note: Make sure you are coming from July stock firmware
1) Download the ROM.zip and the boot.img from above
2) Plug the device into a PC and open a terminal
3) adb reboot bootloader
4) fastboot flash boot boot.img --slot all
5) fastboot reboot-bootloader
6) Using the device volume buttons, select Recovery Mode
7) Go to Wipe data/factory reset and confirm the wipe
8) When it's done, select Apply update from ADB (This will allow you to sideload the ROM.zip)
9) adb sideload S*.zip
10) Reboot


Updating:
1) Download the ROM.zip from above (and boot image for root, if needed)
2) Plug the device into a PC and open a terminal
3) adb reboot recovery
4) Select Apply update from ADB (This will allow you to sideload the ROM zip)
5) adb sideload S*.zip
6) Reboot


For both installs, IF you want root, patch the provided boot image with Magisk Manager and flash it with fastboot


ROM Changelog:
July security patch
System UI tuner added
Volume rocker wake
Wakelock Blocker added
Various improvements to frameworks


For a complete list of changes, look to our Gerrit or Github Org

Device Changelog:
Updated SRX Kernel (4.9.274)
 

NepoRood

Recognized Contributor / Retired Forum Moderator
Jan 26, 2016
2,940
3,915
Bugtussle
ROM Update! (y)

This update to v4.8 adds some new features and kernel improvements, see change log(s) below.

If you're already running Scorpion, just follow the directions under "Updating".
Please, do a clean install if you run into any problems, sometimes "Dirty flashing" causes jank...

The OP will be updated following this post.

Downloads:
*Note(s): Check the uploaded date and build date for the proper downloads
crosshatch
blueline


(These instructions are from Linux, which is what I use. You may need to make adjustments to the commands if using Windows)

First Time Installation:
*Note: Make sure you are coming from August stock firmware
1) Download the ROM.zip and the boot.img from above
2) Plug the device into a PC and open a terminal
3) adb reboot bootloader
4) fastboot flash boot boot.img --slot all
5) fastboot reboot-bootloader
6) Using the device volume buttons, select Recovery Mode
7) Go to Wipe data/factory reset and confirm the wipe
8) When it's done, select Apply update from ADB (This will allow you to sideload the ROM.zip)
9) adb sideload S*.zip
10) Reboot


Updating:
1) Download the ROM.zip from above (and boot image for root, if needed)
2) Plug the device into a PC and open a terminal
3) adb reboot recovery
4) Select Apply update from ADB (This will allow you to sideload the ROM zip)
5) adb sideload S*.zip
6) Reboot


For both installs, IF you want root, patch the provided boot image with Magisk Manager and flash it with fastboot


ROM Changelog:
August security patch
Gcam "Night Sight" fixed (HDR photos, THANKS @kdrag0n)
AoD Tile added
Issues with Pixel 5 fixed, but we don't care...
Various improvements to frameworks

For a complete list of changes, look to our Gerrit or Github Org

Device Changelog:
Updated SRX Kernel (4.9.277)
 

NepoRood

Recognized Contributor / Retired Forum Moderator
Jan 26, 2016
2,940
3,915
Bugtussle
ROM Update! (y)


This update to v4.9 adds some new features and kernel improvements, see change log(s) below.

If you're already running Scorpion, just follow the directions under "Updating".
Please, do a clean install if you run into any problems, sometimes "Dirty flashing" causes jank...

The OP will be updated following this post.

Downloads:
*Note(s): Check the uploaded date and build date for the proper downloads
crosshatch
blueline


(These instructions are from Linux, which is what I use. You may need to make adjustments to the commands if using Windows)

First Time Installation:
*Note: Make sure you are coming from September stock firmware
1) Download the ROM.zip and the boot.img from above
2) Plug the device into a PC and open a terminal
3) adb reboot bootloader
4) fastboot flash boot boot.img --slot all
5) fastboot reboot-bootloader
6) Using the device volume buttons, select Recovery Mode
7) Go to Wipe data/factory reset and confirm the wipe
8) When it's done, select Apply update from ADB (This will allow you to sideload the ROM.zip)
9) adb sideload S*.zip
10) Reboot


Updating:
1) Download the ROM.zip from above (and boot image for root, if needed)
2) Plug the device into a PC and open a terminal
3) adb reboot recovery
4) Select Apply update from ADB (This will allow you to sideload the ROM zip)
5) adb sideload S*.zip
6) Reboot


For both installs, IF you want root, patch the provided boot image with Magisk Manager and flash it with fastboot


ROM Changelog:
September security patch
Display Fixes
Various improvements to frameworks


Device Changelog:
Updated SRX Kernel (4.9.282)

For a complete list of changes, look to our Gerrit or Github Org
 

Top Liked Posts

  • There are no posts matching your filters.
  • 20
    scorp_logo1.png

    Feel The Sting!

    Since we have no working TWRP for the Pixel 3XL, we have to flash with our own custom recovery. In the download section below, you will find a boot image and the ROM zip. You need to download both and follow the install instructions.


    Downloads:
    Crosshatch
    Blueline


    Installation:
    For First Time Install, you must clean flash! Check the upload date, this will let you know which factory image you need to be on before flashing your device.

    1) Plug the device into a PC and open a terminal
    2) adb reboot bootloader
    3) fastboot flash boot boot.img --slot all
    4) fastboot reboot-bootloader
    5) Using the device volume buttons, select Recovery Mode
    6) Use the custom recovery to Factory reset the device
    7) When it's done, select Apply update followed by Apply from ADB
    (This will allow you to sideload the ROM zip)
    8) adb sideload the_rom.zip
    Code:
    # Example (using a Wildcard shortcut)
    adb sideload S*.zip
    9) Reboot system and Enjoy



    Contributors
    NepoRood, dabug123

    Our Source Code
    ROM Source:
    SRX Repos
    Kernel Source: SRX Bluecross Kernel

    Version Information
    ROM OS Version: Android 11
    ROM Kernel: Linux 4.x
    Based On: AOSP, ABC, DU
    Status: Stable
    Current Stable Version: v4.x
    Stable Release Date: 2020-12-17
    9
    Additional Info

    This rom is not meant to be the most feature filled, nor do we claim it is the fastest, or most streamlined. This is just a fun project for us to release our daily irritability.

    Features:

    GApps are included

    Display Settings:
    QS panel:
    -Quick pulldown
    -QS rows and columns
    -QS custom footer
    Status bar:
    -Battery Styles
    Lock screen Weather
    Lock screen tweaks:
    -Clock styles
    -Scramble PIN
    -Now Playing
    -Media art
    -Always on when charging

    Gestures:
    Active Edge (Squeeze)
    Activate the Torch w/Power button
    Full Screen Gesture navigation
    Custom Gesture actions

    Power Menu:
    Advanced Power menu (Restart, Recovery, Bootloader, SystemUI)
    Google Wallet

    Other Info:
    DU-Themes (Accents/Fonts/Backgrounds)
    Pixel Stand is charging only, stock features are not working at this time.


    Join us on Telegram for the latest news and discussion: Link

    Credits:
    (In alphabetical order)
    @ezio84
    @Mazda
    @NYCHitman1
    The hard working people at ABC and DU
    And anyone I forgot...
    8
    ROM Update! (y)


    This update to v4.4 adds some new features and kernel improvements, see change log(s) below.

    If you're already running Scorpion, just follow the directions under "Updating".
    Please, do a clean install if you run into any problems, sometimes "Dirty flashing" causes jank...

    The OP will be updated following this post.

    Downloads:
    *Note(s): Check the upload and build dates for the proper downloads
    crosshatch
    blueline


    (These instructions are from Linux, which is what I use. You may need to make adjustments to the commands if using Windows)

    First Time Installation:
    *Note: Make sure you are coming from April stock firmware
    1) Download the ROM.zip and the boot.img from above
    2) Plug the device into a PC and open a terminal
    3) adb reboot bootloader
    4) fastboot flash boot boot.img --slot all
    5) fastboot reboot-bootloader
    6) Using the device volume buttons, select Recovery Mode
    7) Go to Wipe data/factory reset and confirm the wipe
    8) When it's done, select Apply update from ADB (This will allow you to sideload the ROM.zip)
    9) adb sideload S*.zip
    10) Reboot


    Updating:
    1) Download the ROM.zip from above (and boot image for root, if needed)
    2) Plug the device into a PC and open a terminal
    3) adb reboot recovery
    4) Select Apply update from ADB (This will allow you to sideload the ROM zip)
    5) adb sideload S*.zip
    6) Reboot


    For both installs, IF you want root, patch the provided boot image with Magisk Manager and flash it with fastboot


    ROM Changelog:
    April security patch
    SFUNY lock screen clock style
    Advanced charging info
    QS Panel opacity
    Quick PIN/Password unlock
    Various improvements to frameworks


    For a complete list of changes, look to our Gerrit or Github Org

    Device Changelog:
    Updated SRX Kernel (4.9.264)
    7
    ROM Update! (y)

    This update to v4.8 adds some new features and kernel improvements, see change log(s) below.

    If you're already running Scorpion, just follow the directions under "Updating".
    Please, do a clean install if you run into any problems, sometimes "Dirty flashing" causes jank...

    The OP will be updated following this post.

    Downloads:
    *Note(s): Check the uploaded date and build date for the proper downloads
    crosshatch
    blueline


    (These instructions are from Linux, which is what I use. You may need to make adjustments to the commands if using Windows)

    First Time Installation:
    *Note: Make sure you are coming from August stock firmware
    1) Download the ROM.zip and the boot.img from above
    2) Plug the device into a PC and open a terminal
    3) adb reboot bootloader
    4) fastboot flash boot boot.img --slot all
    5) fastboot reboot-bootloader
    6) Using the device volume buttons, select Recovery Mode
    7) Go to Wipe data/factory reset and confirm the wipe
    8) When it's done, select Apply update from ADB (This will allow you to sideload the ROM.zip)
    9) adb sideload S*.zip
    10) Reboot


    Updating:
    1) Download the ROM.zip from above (and boot image for root, if needed)
    2) Plug the device into a PC and open a terminal
    3) adb reboot recovery
    4) Select Apply update from ADB (This will allow you to sideload the ROM zip)
    5) adb sideload S*.zip
    6) Reboot


    For both installs, IF you want root, patch the provided boot image with Magisk Manager and flash it with fastboot


    ROM Changelog:
    August security patch
    Gcam "Night Sight" fixed (HDR photos, THANKS @kdrag0n)
    AoD Tile added
    Issues with Pixel 5 fixed, but we don't care...
    Various improvements to frameworks

    For a complete list of changes, look to our Gerrit or Github Org

    Device Changelog:
    Updated SRX Kernel (4.9.277)
    7
    ROM Update! (y)


    This update to v4.5 adds some new features and kernel improvements, see change log(s) below.

    If you're already running Scorpion, just follow the directions under "Updating".
    Please, do a clean install if you run into any problems, sometimes "Dirty flashing" causes jank...

    The OP will be updated following this post.

    Downloads:
    *Note(s): Check the upload and build dates for the proper downloads
    crosshatch
    blueline


    (These instructions are from Linux, which is what I use. You may need to make adjustments to the commands if using Windows)

    First Time Installation:
    *Note: Make sure you are coming from May stock firmware
    1) Download the ROM.zip and the boot.img from above
    2) Plug the device into a PC and open a terminal
    3) adb reboot bootloader
    4) fastboot flash boot boot.img --slot all
    5) fastboot reboot-bootloader
    6) Using the device volume buttons, select Recovery Mode
    7) Go to Wipe data/factory reset and confirm the wipe
    8) When it's done, select Apply update from ADB (This will allow you to sideload the ROM.zip)
    9) adb sideload S*.zip
    10) Reboot


    Updating:
    1) Download the ROM.zip from above (and boot image for root, if needed)
    2) Plug the device into a PC and open a terminal
    3) adb reboot recovery
    4) Select Apply update from ADB (This will allow you to sideload the ROM zip)
    5) adb sideload S*.zip
    6) Reboot


    For both installs, IF you want root, patch the provided boot image with Magisk Manager and flash it with fastboot


    ROM Changelog:
    May security patch
    QS Panel opacity improvements
    Sensor blocking
    Radio info (tap for *#*#4636#*#*)
    Various improvements to frameworks


    For a complete list of changes, look to our Gerrit or Github Org

    Device Changelog:
    Updated SRX Kernel (4.9.268)