[ROM][OFFICIAL][Android 11]ScorpionROM v4.x[Google Pixel 3/XL][Blueline/Crosshatch]

[tkacer]

Thanks for your continued support - pickins are getting slim for the 3XL!

 

[ReyStunner]

To update magisk with this rom, would I use the direct method or keep patching the boot file from the first post?

 

[NepoRood]

To update magisk with this rom, would I use the direct method or keep patching the boot file from the first post?

I haven't used Magisk for well over a year, I would think that you should just stick with what works for you (I do include boot images with each release)

 

[freak69ize]

To update magisk with this rom, would I use the direct method or keep patching the boot file from the first post?

You can use direct method

 

[hedgehogmd]

Can't download boot.img i keep getting Invalid File Type (boot.img)! ?

 

[NepoRood]

Can't download boot.img i keep getting Invalid File Type (boot.img)! ?

Thanks for pointing that out, I didn't know it was broken. It has been fixed

 

[hedgehogmd]

Thanks for pointing that out, I didn't know it was broken. It has been fixed

Thank You

 

[NepoRood]

ROM Update!


This update to v4.5 adds some new features and kernel improvements, see change log(s) below.

If you're already running Scorpion, just follow the directions under "Updating".
Please, do a clean install if you run into any problems, sometimes "Dirty flashing" causes jank...

The OP will be updated following this post.

Downloads:
*Note(s): Check the upload and build dates for the proper downloads
crosshatch
blueline


(These instructions are from Linux, which is what I use. You may need to make adjustments to the commands if using Windows)

First Time Installation:
*Note: Make sure you are coming from May stock firmware
1) Download the ROM.zip and the boot.img from above
2) Plug the device into a PC and open a terminal
3) adb reboot bootloader
4) fastboot flash boot boot.img --slot all
5) fastboot reboot-bootloader
6) Using the device volume buttons, select Recovery Mode
7) Go to Wipe data/factory reset and confirm the wipe
8) When it's done, select Apply update from ADB (This will allow you to sideload the ROM.zip)
9) adb sideload S*.zip
10) Reboot


Updating:
1) Download the ROM.zip from above (and boot image for root, if needed)
2) Plug the device into a PC and open a terminal
3) adb reboot recovery
4) Select Apply update from ADB (This will allow you to sideload the ROM zip)
5) adb sideload S*.zip
6) Reboot


For both installs, IF you want root, patch the provided boot image with Magisk Manager and flash it with fastboot


ROM Changelog:
May security patch
QS Panel opacity improvements
Sensor blocking
Radio info (tap for *#*#4636#*#*)
Various improvements to frameworks


For a complete list of changes, look to our Gerrit or Github Org

Device Changelog:
Updated SRX Kernel (4.9.268)

 

[NepoRood]

ROM Update!


This update to v4.6 adds some new features and kernel improvements, see change log(s) below.

If you're already running Scorpion, just follow the directions under "Updating".
Please, do a clean install if you run into any problems, sometimes "Dirty flashing" causes jank...

The OP will be updated following this post.

Downloads:
*Note(s): Check the upload and build dates for the proper downloads
crosshatch
blueline


(These instructions are from Linux, which is what I use. You may need to make adjustments to the commands if using Windows)

First Time Installation:
*Note: Make sure you are coming from June stock firmware
1) Download the ROM.zip and the boot.img from above
2) Plug the device into a PC and open a terminal
3) adb reboot bootloader
4) fastboot flash boot boot.img --slot all
5) fastboot reboot-bootloader
6) Using the device volume buttons, select Recovery Mode
7) Go to Wipe data/factory reset and confirm the wipe
8) When it's done, select Apply update from ADB (This will allow you to sideload the ROM.zip)
9) adb sideload S*.zip
10) Reboot


Updating:
1) Download the ROM.zip from above (and boot image for root, if needed)
2) Plug the device into a PC and open a terminal
3) adb reboot recovery
4) Select Apply update from ADB (This will allow you to sideload the ROM zip)
5) adb sideload S*.zip
6) Reboot


For both installs, IF you want root, patch the provided boot image with Magisk Manager and flash it with fastboot


ROM Changelog:
June security patch
Face Unlock added
Blur improvement
Various improvements to frameworks


For a complete list of changes, look to our Gerrit or Github Org

Device Changelog:
Updated SRX Kernel (4.9.273)

 

[savaytse66]

Wondering if anyone has had trouble dirty flashing the June update. A clean flash is obviously my next step, but after dirty flashing the update twice, I get through the Scorpion flash screens, then the phone reboots back to the 5/04 ROM.

Thanks for the continued support of this great ROM.

 

[NepoRood]

Wondering if anyone has had trouble dirty flashing the June update. A clean flash is obviously my next step, but after dirty flashing the update twice, I get through the Scorpion flash screens, then the phone reboots back to the 5/04 ROM.

Thanks for the continued support of this great ROM.

I didn't have any issues, I usually always flash dirty

 

[leaveNOW]

any feature hide notch with rounded on corner?

 

[NepoRood]

any feature hide notch with rounded on corner?

I'm not really sure what you are getting at, however, all of our "features" are located in Settings app. We don't use a special tweak type of app, we put things in Settings where they belong (our opinion anyway, lol)

If you're looking for something in particular, I suggest using the search menu in Settings. It will either take you right where you want to go, or we don't have that feature

 

[NepoRood]

ROM Update!


This update to v4.7 adds some new features and kernel improvements, see change log(s) below.

If you're already running Scorpion, just follow the directions under "Updating".
Please, do a clean install if you run into any problems, sometimes "Dirty flashing" causes jank...

The OP will be updated following this post.

Downloads:
*Note(s): Check the upload and build dates for the proper downloads
crosshatch
blueline


(These instructions are from Linux, which is what I use. You may need to make adjustments to the commands if using Windows)

First Time Installation:
*Note: Make sure you are coming from July stock firmware
1) Download the ROM.zip and the boot.img from above
2) Plug the device into a PC and open a terminal
3) adb reboot bootloader
4) fastboot flash boot boot.img --slot all
5) fastboot reboot-bootloader
6) Using the device volume buttons, select Recovery Mode
7) Go to Wipe data/factory reset and confirm the wipe
8) When it's done, select Apply update from ADB (This will allow you to sideload the ROM.zip)
9) adb sideload S*.zip
10) Reboot


Updating:
1) Download the ROM.zip from above (and boot image for root, if needed)
2) Plug the device into a PC and open a terminal
3) adb reboot recovery
4) Select Apply update from ADB (This will allow you to sideload the ROM zip)
5) adb sideload S*.zip
6) Reboot


For both installs, IF you want root, patch the provided boot image with Magisk Manager and flash it with fastboot


ROM Changelog:
July security patch
System UI tuner added
Volume rocker wake
Wakelock Blocker added
Various improvements to frameworks


For a complete list of changes, look to our Gerrit or Github Org

Device Changelog:
Updated SRX Kernel (4.9.274)

 

[LeignHan]

1. Google photo's original quality backup will not be enabled on my phone too ,only storage saver quality are unimitated.

2.Revoke USB debugging authorizations are missing in developer options

 

[NepoRood]

ROM Update!

This update to v4.8 adds some new features and kernel improvements, see change log(s) below.

If you're already running Scorpion, just follow the directions under "Updating".
Please, do a clean install if you run into any problems, sometimes "Dirty flashing" causes jank...

The OP will be updated following this post.

Downloads:
*Note(s): Check the uploaded date and build date for the proper downloads
crosshatch
blueline


(These instructions are from Linux, which is what I use. You may need to make adjustments to the commands if using Windows)

First Time Installation:
*Note: Make sure you are coming from August stock firmware
1) Download the ROM.zip and the boot.img from above
2) Plug the device into a PC and open a terminal
3) adb reboot bootloader
4) fastboot flash boot boot.img --slot all
5) fastboot reboot-bootloader
6) Using the device volume buttons, select Recovery Mode
7) Go to Wipe data/factory reset and confirm the wipe
8) When it's done, select Apply update from ADB (This will allow you to sideload the ROM.zip)
9) adb sideload S*.zip
10) Reboot


Updating:
1) Download the ROM.zip from above (and boot image for root, if needed)
2) Plug the device into a PC and open a terminal
3) adb reboot recovery
4) Select Apply update from ADB (This will allow you to sideload the ROM zip)
5) adb sideload S*.zip
6) Reboot


For both installs, IF you want root, patch the provided boot image with Magisk Manager and flash it with fastboot


ROM Changelog:
August security patch
Gcam "Night Sight" fixed (HDR photos, THANKS @kdrag0n)
AoD Tile added
Issues with Pixel 5 fixed, but we don't care...
Various improvements to frameworks

For a complete list of changes, look to our Gerrit or Github Org

Device Changelog:
Updated SRX Kernel (4.9.277)

 

[stenmats23]

Does this version have color temperature adjustment? like LG, XIAOMI. My phone is a bit yellow. thanks

 

[NepoRood]

Does this version have color temperature adjustment? like LG, XIAOMI. My phone is a bit yellow. thanks

Will be in v4.9, we've added and it works, so hopefully we'll get that out one day next week

 

[NepoRood]

ROM Update!


This update to v4.9 adds some new features and kernel improvements, see change log(s) below.

If you're already running Scorpion, just follow the directions under "Updating".
Please, do a clean install if you run into any problems, sometimes "Dirty flashing" causes jank...

The OP will be updated following this post.

Downloads:
*Note(s): Check the uploaded date and build date for the proper downloads
crosshatch
blueline


(These instructions are from Linux, which is what I use. You may need to make adjustments to the commands if using Windows)

First Time Installation:
*Note: Make sure you are coming from September stock firmware
1) Download the ROM.zip and the boot.img from above
2) Plug the device into a PC and open a terminal
3) adb reboot bootloader
4) fastboot flash boot boot.img --slot all
5) fastboot reboot-bootloader
6) Using the device volume buttons, select Recovery Mode
7) Go to Wipe data/factory reset and confirm the wipe
8) When it's done, select Apply update from ADB (This will allow you to sideload the ROM.zip)
9) adb sideload S*.zip
10) Reboot


Updating:
1) Download the ROM.zip from above (and boot image for root, if needed)
2) Plug the device into a PC and open a terminal
3) adb reboot recovery
4) Select Apply update from ADB (This will allow you to sideload the ROM zip)
5) adb sideload S*.zip
6) Reboot


For both installs, IF you want root, patch the provided boot image with Magisk Manager and flash it with fastboot


ROM Changelog:
September security patch
Display Fixes
Various improvements to frameworks


Device Changelog:
Updated SRX Kernel (4.9.282)

For a complete list of changes, look to our Gerrit or Github Org

 

[nick491]

Was using PixelDust for a long time, then hopped into this ROM yesterday. Really kicks! Thanks for maintaining this custom ROM. Works flawlessly.