• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Development [ROM] [OFFICIAL] ArrowOS 11.0 [android-11.0][vayu/bhima]

Search This thread

hakkai999

Senior Member
Jun 25, 2010
490
87
Mandaue
Xiaomi Poco X3 Pro
Hi All,

I've been using ArrowOS for a while and the experience has been fantastic except for this one particular issue. There are random times when the touchscreen just loses it. Without me touching it, it would tap the screen randomly and I need to lock then unlock the screen for it to stop.


Anyone else have this issue?
 
Last edited:
  • Like
Reactions: ianseer and pxotas

GansFF

Member
Nov 15, 2018
11
2

Attachments

  • Viper_2.2_Full.zip
    15.6 MB · Views: 21
  • Like
Reactions: ianseer

kubersharma

Recognized Developer
Dec 30, 2015
1,171
5,591
New Delhi , India
New update is available!
04/08/2021

Changelogs:
Update blobs from miui_VAYUINGlobal_V12.5.3.0.RJUINXM
Switch to GCamGOPrebuilt-V2
Address denials and cleanup unneeded policies
Fix crackling sound on some loud ringtones.
Address slow charging text issue, now it should show rapid charging with stock charger
Further debloat power and camera drivers in kernel
Fix screen selection issue on touching fp sensor
Misc changes etc, please check device repositories and source changelogs for more info!

Note:
This includes custom vendor
You can dirty flash if you were on community
People on older official may get OTA but do not use them, CLEAN flash is recommended!
People on previous official can update via OTA.

Discussion chat:

Donate:

UPI: [email protected]
 

hakkai999

Senior Member
Jun 25, 2010
490
87
Mandaue
Xiaomi Poco X3 Pro
New update is available!
04/08/2021

Changelogs:
Update blobs from miui_VAYUINGlobal_V12.5.3.0.RJUINXM
Switch to GCamGOPrebuilt-V2
Address denials and cleanup unneeded policies
Fix crackling sound on some loud ringtones.
Address slow charging text issue, now it should show rapid charging with stock charger
Further debloat power and camera drivers in kernel
Fix screen selection issue on touching fp sensor
Misc changes etc, please check device repositories and source changelogs for more info!

Note:
This includes custom vendor
You can dirty flash if you were on community
People on older official may get OTA but do not use them, CLEAN flash is recommended!
People on previous official can update via OTA.

Discussion chat:

Donate:

UPI: [email protected]
Fix screen selection issue on touching fp sensor


Is this related to the issue I posted above? Thanks for your great work.
 

pl1992aw

Senior Member
Apr 5, 2019
1,040
633
Hey

I'm really sorry for bothering you but i have searched everywhere and can't fidd a solution to my problem.

I followed this guide to flash the ROM (updated to 12.5 as i saw on the official site that it was a requirement for the latest stable ROM).

The recovery fails to flash ROM stating that the .zip file is corrupt (eventhough I verified the checksum) and also returns a couple of :unable to open block device /dev/block/loop17: No such device or address".

I've attached the logcat to help you identify the problem.

Am I doing something wrong? Am I missing something? Am I just stupid?
Thank you in advance!

Try with TWRP.

PBRB is outdated.
 

pl1992aw

Senior Member
Apr 5, 2019
1,040
633
thx, but this is already deactivated ... It looks as if a dark light would turn on in the display that illuminates the display to its full size, but you cannot see any apps - only the display becomes a little brighter

Maybe a bug of sleep/hybernate, I'm not sure though.

Follow the bug report form and write it here or in their Telegram.
 

BrickBa

New member
Mar 2, 2019
3
0
How do i update my phone and retain TWRP and root access?
Screenshot_20210805-152947.png
 

kd276

Senior Member
Jun 14, 2021
317
63
Hi All,

I've been using ArrowOS for a while and the experience has been fantastic except for this one particular issue. There are random times when the touchscreen just loses it. Without me touching it, it would tap the screen randomly and I need to lock then unlock the screen for it to stop.


Anyone else have this issue?
Yes, reported some pages back similar issue (buils 07.31), at boot and sometimes random the double tap do not work once your screen go to sleep, need to press the power button to wake up the screen.

Only OSS custom vendor is affected, 07.09 with OEM vendor work as intended.
 
Last edited:

kd276

Senior Member
Jun 14, 2021
317
63
Are following bugs still active in the last 04.08 build?

- double tap to wake up the screen do not work when the device go into sleep mode
- stuttering on scrolling with more evidence in browsing web pages with images
- USB debug option bugged and not saved, need to set it again at the next boot
- call recording do not work anymore in dialer
- battery charge statistics in the lock screen missing
- build in file manager GUI bugged and duplicate download files when you click on tags, tags are all messed up and cover each other
- gallery crash when you try to change colors and exit
- is cpu scaling fixed or is the same? Minimum cpu clock is 1,4-1,7Ghz, in the 07.09 build the minimum is 500mhz, the battery drain is tangible expecially in idle
- at random the screen refresh itself and load again all the element on the GUI without a reason, expecially when i load the setting menù and subsmenù.
 
May 25, 2021
14
4
Hi, actually I'm on one os MIUI based rom, to flash the last arrow os build do I need to do a clean flash of the stock MIUI 12.5.2?, thats what I have before flash one os.
 

hakkai999

Senior Member
Jun 25, 2010
490
87
Mandaue
Xiaomi Poco X3 Pro
Yes, reported some pages back similar issue (buils 07.31), at boot and sometimes random the double tap do not work once your screen go to sleep, need to press the power button to wake up the screen.

Only OSS custom vendor is affected, 07.09 with OEM vendor work as intended.
Actually it's not double tap to wake. Literally there are touches that register on the screen as if a lot of fingers are tapping on it randomly. It freaks out and you can't do anything other than lock the phone to stop it.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 5
    I updated #2 with a possible solution for users facing ghost touch problems in their units, this has nothing to do with ArrowOS; this is something at HW or FW level, people are able to fix it while rolling back to 12.0.4.0 or 12.0.6.0 firmware (you will need to boot full MIUI rom for them to do their magic on partitions)
    Even if MIUI fixes it in the latest releases, we might not know how as they do not publish changes made to their kernel source rather publish the base/initial sources only
    anyways, read more at the FAQ section in #2
    Just to be clear, I never faced these issues as I unlocked on the 7th day and never went to MIUI again nor flashed any other firmware, more than 98% of the users also do not face it at a regular basis. I have a bhima 8/128gb variant (Indian vayu with no NFC)
    Good luck
    4
    A new update will soon be released (08-09-2021) will include:
    DEVICE

    - Update blobs from V12.5.4.0.RJUMIXM
    - Bring back and switch to AOSP WFD implementation
    - Import remaining Xiaomi init script changes
    - Fix Ambient Display crash on clean installs
    - Misc changes and improvements

    ROM
    - Merged September security patches
    - Full source changelogs here: https://arrowos.net/changelog.php

    NOTE
    - Requires MIUI 12.5 firmware (any region), but if you face issues with the latest firmware you can use 12.0.4.0 or above (Remember you need to boot to that specific MIUI version first for MIUI to do its magic on firmware partitions before moving back to ArrowOS)
    - These builds include custom source compiled vendor and ODM partitions
    - Misc changes and improvements
    - See full device changes at: https://github.com/ArrowOS-devices?q=vayu

    Donate:
    ArrowOS:
    kubersharma001: UPI: [email protected]


    For helping me test new changes to some feedbacks, I am usually active in my chat, you can join it here: https://t.me/kubersharma001chat

    Thanks!
    4
    New update is available!

    Changelogs:

    - Merge latest CAF tag on kernel (LA.UM.9.1.r1-11100-SMxxx0.0)
    - Migrate to libperfmgr power aidl hal (pixel power hal)
    - Add NotchBar killer (Can be seen in cutout menu in developer settings)
    - Update Brazillian translations in device settings
    - Cleanup init rc files/scripts
    - Sync init rc files/scripts from CAF 9.1.r1-10900 SMxxx0.0 tag
    - Cleanup unneeded blobs
    - Add missing vintf entries
    - Remove duplicate, irrelevant references in init rc files
    - Introduce raise to wake gesture
    - Enforce all RRO for all resource overlays
    - Remove QTI perfd, I/O prefetcher blobs, props in favor of moving to libperfmgr
    - Decrease minimum brightness value
    - Update SE policy rules
    - Synchronise some props from stock MIUI
    - Enable idle_state mechanism
    - Fix Clear speaker footer text issues
    - Add a summary for clear speaker and Dirac preferences
    - Zram/swap improvements
    - Move remaining device-side RROs to vendor partition
    - Misc changes and improvements

    ^ This is not a full changelog, please check device repositories (https://github.com/ArrowOS-devices?q=vayu) and source changelogs (https://arrowos.net/changelog.php) for all the changes made from the last date of update.

    Donate:
    UPI: [email protected]

    Support chat: https://t.me/kubersharma001
    3
    who is developer of this ROM? will u fix brightness problem at next update and when? if no pls inform, i will move to lineage or crdroid, lowest brightness on arrow is trash
    Developer of this ROM definitely is not paid by Xiaomi themselfs and is not obliged to spend his valuable time to improve / fix stuff on a ROM that is voluntarily maintained, yet he does. Instead, be thankful that OP still improves upon an AOSP based ROM which X3 Pro is not designed for originally. Please do not ask for ETAs. If you have any problem about the ROM itself, follow this guide by OP: https://blog.arrowos.net/how-to-report-a-bug/
    3
    New update will include the following changes:
    - Enable AOSP Sim toggle
    - Minor refresh rate improvement
    - Fix SafetyNet issues for all users
    - Fix GoogleCamera mod video recording issue
    - Allow all 4 rotations
    - Misc changes and fixes

    Donate:
    PayPal: https://www.paypal.com/paypalme/kubersharma001
    UPI: [email protected]
  • 48
    logo.png

    ArrowOS for POCO X3 PRO (vayu|bhima)

    ABOUT
    ArrowOS
    is an AOSP/CAF based project started with the aim of keeping things simple, clean and neat.

    Website: https://arrowos.net
    Telegram: Channel | TG Portal/Links
    Github: https://github.com/ArrowOS
    Code Review: review.arrowos.net
    E-mail: arrowos.contact
    PayPal: Donate to us
    Blog: blog.arrowos.net

    Checkout more documentation at (maintainership/contributing): Check this out

    WHAT WORKS?
    1. Audio
    2. Bluetooth
    3. Camera
    4. Dt2w
    5. Display
    6. Torch
    7. Battery/Notification LED
    8. Sensors
    9. Radio, data. networks (2g,3g,4g+volte,vowifi etc)
    10. Refresh rates(120,90,60)
    11. Headset port, charging ports, etc
    12. GPS/Location
    13. Almost everything?
    NOTE:
    • ArrowOS ships with source compiled vendor and odm partitions.​
    WHAT DOESN'T WORK ?
    1. You tell us.​
    Be sure to include a log: check how to

    DOWNLOADS
    Click here to Download
    Tip: Select OEM -> Device, choose Arrow version, choose the build type: "GAPPS" or "VANILLA" to download.

    Instructions
    FIRST INSTALL?:
    • Remove any fingerprint, PIN, or password in MIUI
    • Unlock the bootloader
    • Transfer ROM to internal storage
    • Install any suitable recovery
    • Flash ROM zip file
    • Do a data wipe in recovery (format data)
    • Reboot to the system, wait and enjoy
    FLASHING UPDATES?:
    • Download via OTA Updater and let it automatically install; OR
    • Download an update, transfer to internal/external storage (always check file sha256)
    • Flash ROM zip and reboot.
    Read our blog article/post about:
    * HOW-TO report a bug
    * GAPPS and VANILLA variants
    * Checking build integrity

    ROM Source: https://github.com/ArrowOS
    Kernel Source: https://github.com/ArrowOS-Devices/android_kernel_xiaomi_vayu

    ROM Firmware Required: MIUI 12.5.2.0 global or you can use any latest R firmware from your region as well (firmware only)
    Donate: https://www.paypal.me/kubersharma001
    UPI: [email protected]
    14
    You can download ArrowOS Recovery if you like or use other 3rd party recoveries

    FAQ::

    Tip: If you are new to custom ROMs, I would suggest taking a TWRP backup/partition backup (usually: persist, efs, firmware partitions, etc) saved in your cloud or computer.

    Q1: How can I update to a new update?
    A1: Flash ArrowOS recovery and download and install the update from the OTA Updater application OR Download from arrowos.net [codename: vayu] boot to TWRP and flash it; if you are using ArrowOS recovery, copy build zip to external storage (sdcard, USB otg etc) and install via "Apply system update option"
    If you are on PC, you can also use adb sideload while being on recovery

    Q2: Why is Mi8 (dipper)/walleye oreo or any other device's build fingerprint and desc props/values are used?
    A2
    : As most of the custom ROM users might be aware that SafetyNet cannot pass with devices own build fingerprint props due to the multiple checks or other aspects which is unknown, done by the OEM/Google which fails hence nowadays devices are generally spoofed with build fingerprint and description props of devices which passes CTS/SafetyNet like from a device with Android Oreo or Pre Android Oreo (walleye oreo; mi8 oreo, etc) or from latest Pixels (like redfin)
    This device as of now uses Mi8 (dipper) build fingerprint and description to pass SafetyNet!
    (In future release: It can change to Pixels or some other device too just to "Pass SafetyNet checks") hence don't consider this as some lame reason to spam or message about.

    Q3: Facing ghost touch issues on your device?
    A3:
    This issue has been recognized by Xiaomi as a fault in their MIUI firmware, I am not yet sure if this is completely a hardware fault or just a firmware fault with specific variants
    I have an Indian 8/128 variant and I never faced such issues.
    Since Xiaomi does not release newer changes done to the kernel source, we are stuck with the initial R source release hence we don't know what changes they made to fix it on MIUI if they ever did
    But, some people have fixed ghost touch issues by :
    * Flashing MIUI 12.0.4.0/12.0.6.0 full MIUI rom, booting to it, setup up everything (like registering the fingerprint, etc), and then moving to custom ROMs.

    [* Using 120hz? (not confirm but 2 users have suggested doing this has solved sluggish touch issues for them)]

    If this method works for you do not update firmware unless you are sure that will work
    This is not a global issue, only a limited number of people face it!
    Also, users have faced ghost touch issues on MIUI 12.5.3.0+ versions aswell, so this is not something custom from related! It is hardware/firmware level

    Do not report bugs with mods or custom kernels.

    You can chat with me on Telegram: https://t.me/kubersharma001chat
    12
    Hey. just wanted to notify you all that I am going to remove the "Smart Charging" feature in future builds, Also I suggest using mods/ modules which simulate similar behavior as the smart charging feature IS NOT RECOMMENDED!
    BECAUSE:

    A bunch of Xiaomi devices (at least vayu, surya etc for sure) (or lets say some QUALCOMM devices in general too) have somewhat buggy PMIC ( i.e Power Management IC) and facing the issue is rare in most scenarios (some can face it without using these features too) till you don't mess power_supply or anything related to PMIC mods or features like smart charging, idle state charging, those Magisk modules for smart charging like ACC or whatever can trigger the PMIC to bug out as well and in that case your battery will be drained, won't charge unless you reboot to bootloader till the time you can. If you don't do that and let it drain (which I remind you might be quicker than usual) it might just go DEAD.

    Ref: https://github.com/lybdroid/poco-x3-pro/issues/1

    Most people might not face the issue, but still, there is a chance, and let's not risk it. I would suggest avoiding draining your battery to 0.

    I am not saying the above-mentioned features or mods are bad or broken but there is a slight chance something bad can happen, so my removal of this feature on vayu is just a safe play till we know something better
    "Be safe than sorry"
    11
    Fixes/Changes done for next build/update:
    - Yellow tint on screen
    - Lowers vibration intensity to a decent level
    - Force volume steps to 25 as some MIUI vendors are forcing this to insane 150 volume steps, yikes.
    - Fix Recents Overview sluggishness
    - Ship GCamGoPrebuilt instead of AOSP camera2
    - Other minor improvements and fixes.
    9
    BTW, Incase anyone wasn't aware you can see last 24 hour active/installs statistics here:
    vayu is now under top10


    Changes for Next update:
    Fixed WFD showing green screen while casting to laptop