• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Development [ROM] [OFFICIAL] ArrowOS 11.0 [android-11.0][vayu/bhima]

Search This thread

k3lcior

Senior Member
Feb 23, 2011
4,502
2,115
Kraków
Moto G5
Xiaomi Poco X3 Pro
Actually it's not double tap to wake. Literally there are touches that register on the screen as if a lot of fingers are tapping on it randomly. It freaks out and you can't do anything other than lock the phone to stop it.
That didn't ever happened to me, this sound more like a hardware issue or faulty/dirty screen protector if you are lucky
 
  • Like
Reactions: kd276

kd276

Senior Member
Jun 14, 2021
317
63
Actually it's not double tap to wake. Literally there are touches that register on the screen as if a lot of fingers are tapping on it randomly. It freaks out and you can't do anything other than lock the phone to stop it.
I see, but didn't happen to me either, but have you tried to rollback to 07.09 build? The procedure is a bit long since you have to restore the oem vendor (see some pages back), but in my case it solved many bugs. If the issue persist you have indeed an hardware issue.
 

hakkai999

Senior Member
Jun 25, 2010
490
87
Mandaue
Xiaomi Poco X3 Pro
I see, but didn't happen to me either, but have you tried to rollback to 07.09 build? The procedure is a bit long since you have to restore the oem vendor (see some pages back), but in my case it solved many bugs. If the issue persist you have indeed an hardware issue.
I'll try using Pixel Plus for now to see if it happens. I'm sure it's not a hardware issue cause it hasn't happened at all when I was on MIUI Europe. You could be right that it's a vendor firmware issue though.
 

kd276

Senior Member
Jun 14, 2021
317
63
Similar but it actually taps around. Not sure if it taps for him cause his video is only on the lockscreen. Mine can easily be seen when I play Digimon ReArise where it displays the taps on screen.
From that topic pl1992 linked appear to be software related, anyway, if you restore the oem vendor or change rom let us know if this solve your issue, can be usefull to locate the cause.
 
May 25, 2021
14
4
Fingerprint sensor problem still in the last build, sometimes I put my finger in the sensor and nothing happens, I was using one os miui and everything was working fine. This problem have been happening in the past builds too. And about the clocks I think still the same increasing the battery consumption compared to the 07.09 build that was in my opinion the best in terms of battery backup.
 

Attachments

  • Screenshot_20210806-082555.png
    Screenshot_20210806-082555.png
    218.7 KB · Views: 35

hakkai999

Senior Member
Jun 25, 2010
490
87
Mandaue
Xiaomi Poco X3 Pro
From that topic pl1992 linked appear to be software related, anyway, if you restore the oem vendor or change rom let us know if this solve your issue, can be usefull to locate the cause.
I've been playing on Pixel Plus whole day and there's been no issue so it's definitely related to ArrowOS. No idea how I can isolate it though. Can you log touch inputs?
 
  • Like
Reactions: kd276

kd276

Senior Member
Jun 14, 2021
317
63
I've been playing on Pixel Plus whole day and there's been no issue so it's definitely related to ArrowOS. No idea how I can isolate it though. Can you log touch inputs?

You can record the screen when the issue appear, it should show us everything, anyway is indeed related to the last builds since i have issues with the tap too, 07.09 is not affected, but 07.09 use OEM vendor, so the issue can be also related to the OSS vendor that other roms devs use too (same source), Pixel Plus do not use OSS but OEM vendor for what i see so this can explain why you do not have issues.

Fingerprint sensor problem still in the last build, sometimes I put my finger in the sensor and nothing happens, I was using one os miui and everything was working fine. This problem have been happening in the past builds too. And about the clocks I think still the same increasing the battery consumption compared to the 07.09 build that was in my opinion the best in terms of battery backup.

Do not tried last build but 07.31 only (vanilla) and the drain is real, expecially in idle (there is a post of another user in the previous pages where he report a 3-4% battery consumation increase).
 
Last edited:
  • Like
Reactions: hakkai999
May 25, 2021
14
4
You can record the screen when the issue appear, it should show us everything, anyway is indeed related to the last builds since i have issues with the tap too, 07.09 is not affected, but 07.09 use OEM vendor, so the issue can be also related to the OSS vendor that other roms devs use too (same source), Pixel Plus do not use OSS but OEM vendor for what i see so this can explain why you do not have issues.



Do not tried last build but 07.31 only (vanilla) and the drain is real, expecially in idle (there is a post of another user in the previous pages where he report a 3-4% battery consumation increase).
The fingerprint problem its not happening so frequently, and in a general this last build has a better battery consumption than past builds, I would recommend even with the fingerprint sensor bug, but I have to say that I experienced this same bug in a miui vendor build but I don't remember the date, after some updates it was solved, but now is happening again. Arrow is my favorite rom even with that and I will continue using, just gonna wait for other updates. The bb in this build is better than one os and there is no lag in YouTube vanced, so to me that's enough for now. Thanks to the developer, because any other that I tested the backup restoration from Google wasnt working.
 
  • Like
Reactions: kd276

kd276

Senior Member
Jun 14, 2021
317
63
The fingerprint problem its not happening so frequently, and in a general this last build has a better battery consumption than past builds, I would recommend even with the fingerprint sensor bug, but I have to say that I experienced this same bug in a miui vendor build but I don't remember the date, after some updates it was solved, but now is happening again. Arrow is my favorite rom even with that and I will continue using, just gonna wait for other updates. The bb in this build is better than one os and there is no lag in YouTube vanced, so to me that's enough for now. Thanks to the developer, because any other that I tested the backup restoration from Google wasnt working.
Thanks to report your experience and i'm happy you do not encounter much bugs like i did (i use vanilla). Indeed this rom is actually the the best for this device, however, since the OSS is still is early development and other people suffer several issues is better to wait more builds, rollback everytime is a pain.
Still have faith both in this and also LineageOS project, best builds for my daily usage.
 
  • Like
Reactions: Rhaegar85

jorgeepelos

Senior Member
Feb 11, 2015
702
123
Xiaomi Poco X3 NFC
Actually it's not double tap to wake. Literally there are touches that register on the screen as if a lot of fingers are tapping on it randomly. It freaks out and you can't do anything other than lock the phone to stop it.
here same problem, im on crdroid, ghosting problem is common now... check that and talk to dev if you have the same problem to solve this..................
your problem is same like this?
thanks
 

Attachments

  • video_2021-08-07_01-32-20.mp4
    53.7 MB · Views: 0

kd276

Senior Member
Jun 14, 2021
317
63
Hello,
I have firmware "Miui-V12.5.1.0.RJUEUXM", is possible flash this rom with that firmware?
Greetings.
I have your same firmware and yes, i'm using this rom (07.09 vanilla), the issue i have are unrelated to the firmware (tried also 15.5.2.0 global) but the vendor, with oem vendor no problem, with oss vendor lot of micro bugs.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 5
    I updated #2 with a possible solution for users facing ghost touch problems in their units, this has nothing to do with ArrowOS; this is something at HW or FW level, people are able to fix it while rolling back to 12.0.4.0 or 12.0.6.0 firmware (you will need to boot full MIUI rom for them to do their magic on partitions)
    Even if MIUI fixes it in the latest releases, we might not know how as they do not publish changes made to their kernel source rather publish the base/initial sources only
    anyways, read more at the FAQ section in #2
    Just to be clear, I never faced these issues as I unlocked on the 7th day and never went to MIUI again nor flashed any other firmware, more than 98% of the users also do not face it at a regular basis. I have a bhima 8/128gb variant (Indian vayu with no NFC)
    Good luck
    4
    A new update will soon be released (08-09-2021) will include:
    DEVICE

    - Update blobs from V12.5.4.0.RJUMIXM
    - Bring back and switch to AOSP WFD implementation
    - Import remaining Xiaomi init script changes
    - Fix Ambient Display crash on clean installs
    - Misc changes and improvements

    ROM
    - Merged September security patches
    - Full source changelogs here: https://arrowos.net/changelog.php

    NOTE
    - Requires MIUI 12.5 firmware (any region), but if you face issues with the latest firmware you can use 12.0.4.0 or above (Remember you need to boot to that specific MIUI version first for MIUI to do its magic on firmware partitions before moving back to ArrowOS)
    - These builds include custom source compiled vendor and ODM partitions
    - Misc changes and improvements
    - See full device changes at: https://github.com/ArrowOS-devices?q=vayu

    Donate:
    ArrowOS:
    kubersharma001: UPI: [email protected]


    For helping me test new changes to some feedbacks, I am usually active in my chat, you can join it here: https://t.me/kubersharma001chat

    Thanks!
    4
    New update is available!

    Changelogs:

    - Merge latest CAF tag on kernel (LA.UM.9.1.r1-11100-SMxxx0.0)
    - Migrate to libperfmgr power aidl hal (pixel power hal)
    - Add NotchBar killer (Can be seen in cutout menu in developer settings)
    - Update Brazillian translations in device settings
    - Cleanup init rc files/scripts
    - Sync init rc files/scripts from CAF 9.1.r1-10900 SMxxx0.0 tag
    - Cleanup unneeded blobs
    - Add missing vintf entries
    - Remove duplicate, irrelevant references in init rc files
    - Introduce raise to wake gesture
    - Enforce all RRO for all resource overlays
    - Remove QTI perfd, I/O prefetcher blobs, props in favor of moving to libperfmgr
    - Decrease minimum brightness value
    - Update SE policy rules
    - Synchronise some props from stock MIUI
    - Enable idle_state mechanism
    - Fix Clear speaker footer text issues
    - Add a summary for clear speaker and Dirac preferences
    - Zram/swap improvements
    - Move remaining device-side RROs to vendor partition
    - Misc changes and improvements

    ^ This is not a full changelog, please check device repositories (https://github.com/ArrowOS-devices?q=vayu) and source changelogs (https://arrowos.net/changelog.php) for all the changes made from the last date of update.

    Donate:
    UPI: [email protected]

    Support chat: https://t.me/kubersharma001
    3
    who is developer of this ROM? will u fix brightness problem at next update and when? if no pls inform, i will move to lineage or crdroid, lowest brightness on arrow is trash
    Developer of this ROM definitely is not paid by Xiaomi themselfs and is not obliged to spend his valuable time to improve / fix stuff on a ROM that is voluntarily maintained, yet he does. Instead, be thankful that OP still improves upon an AOSP based ROM which X3 Pro is not designed for originally. Please do not ask for ETAs. If you have any problem about the ROM itself, follow this guide by OP: https://blog.arrowos.net/how-to-report-a-bug/
    3
    New update will include the following changes:
    - Enable AOSP Sim toggle
    - Minor refresh rate improvement
    - Fix SafetyNet issues for all users
    - Fix GoogleCamera mod video recording issue
    - Allow all 4 rotations
    - Misc changes and fixes

    Donate:
    PayPal: https://www.paypal.com/paypalme/kubersharma001
    UPI: [email protected]
  • 49
    logo.png

    ArrowOS for POCO X3 PRO (vayu|bhima)

    ABOUT
    ArrowOS
    is an AOSP/CAF based project started with the aim of keeping things simple, clean and neat.

    Website: https://arrowos.net
    Telegram: Channel | TG Portal/Links
    Github: https://github.com/ArrowOS
    Code Review: review.arrowos.net
    E-mail: arrowos.contact
    PayPal: Donate to us
    Blog: blog.arrowos.net

    Checkout more documentation at (maintainership/contributing): Check this out

    WHAT WORKS?
    1. Audio
    2. Bluetooth
    3. Camera
    4. Dt2w
    5. Display
    6. Torch
    7. Battery/Notification LED
    8. Sensors
    9. Radio, data. networks (2g,3g,4g+volte,vowifi etc)
    10. Refresh rates(120,90,60)
    11. Headset port, charging ports, etc
    12. GPS/Location
    13. Almost everything?
    NOTE:
    • ArrowOS ships with source compiled vendor and odm partitions.​
    WHAT DOESN'T WORK ?
    1. You tell us.​
    Be sure to include a log: check how to

    DOWNLOADS
    Click here to Download
    Tip: Select OEM -> Device, choose Arrow version, choose the build type: "GAPPS" or "VANILLA" to download.

    Instructions
    FIRST INSTALL?:
    • Remove any fingerprint, PIN, or password in MIUI
    • Unlock the bootloader
    • Transfer ROM to internal storage
    • Install any suitable recovery
    • Flash ROM zip file
    • Do a data wipe in recovery (format data)
    • Reboot to the system, wait and enjoy
    FLASHING UPDATES?:
    • Download via OTA Updater and let it automatically install; OR
    • Download an update, transfer to internal/external storage (always check file sha256)
    • Flash ROM zip and reboot.
    Read our blog article/post about:
    * HOW-TO report a bug
    * GAPPS and VANILLA variants
    * Checking build integrity

    ROM Source: https://github.com/ArrowOS
    Kernel Source: https://github.com/ArrowOS-Devices/android_kernel_xiaomi_vayu

    ROM Firmware Required: MIUI 12.5.2.0 global or you can use any latest R firmware from your region as well (firmware only)
    Donate: https://www.paypal.me/kubersharma001
    UPI: [email protected]
    14
    You can download ArrowOS Recovery if you like or use other 3rd party recoveries

    FAQ::

    Tip: If you are new to custom ROMs, I would suggest taking a TWRP backup/partition backup (usually: persist, efs, firmware partitions, etc) saved in your cloud or computer.

    Q1: How can I update to a new update?
    A1: Flash ArrowOS recovery and download and install the update from the OTA Updater application OR Download from arrowos.net [codename: vayu] boot to TWRP and flash it; if you are using ArrowOS recovery, copy build zip to external storage (sdcard, USB otg etc) and install via "Apply system update option"
    If you are on PC, you can also use adb sideload while being on recovery

    Q2: Why is Mi8 (dipper)/walleye oreo or any other device's build fingerprint and desc props/values are used?
    A2
    : As most of the custom ROM users might be aware that SafetyNet cannot pass with devices own build fingerprint props due to the multiple checks or other aspects which is unknown, done by the OEM/Google which fails hence nowadays devices are generally spoofed with build fingerprint and description props of devices which passes CTS/SafetyNet like from a device with Android Oreo or Pre Android Oreo (walleye oreo; mi8 oreo, etc) or from latest Pixels (like redfin)
    This device as of now uses Mi8 (dipper) build fingerprint and description to pass SafetyNet!
    (In future release: It can change to Pixels or some other device too just to "Pass SafetyNet checks") hence don't consider this as some lame reason to spam or message about.

    Q3: Facing ghost touch issues on your device?
    A3:
    This issue has been recognized by Xiaomi as a fault in their MIUI firmware, I am not yet sure if this is completely a hardware fault or just a firmware fault with specific variants
    I have an Indian 8/128 variant and I never faced such issues.
    Since Xiaomi does not release newer changes done to the kernel source, we are stuck with the initial R source release hence we don't know what changes they made to fix it on MIUI if they ever did
    But, some people have fixed ghost touch issues by :
    * Flashing MIUI 12.0.4.0/12.0.6.0 full MIUI rom, booting to it, setup up everything (like registering the fingerprint, etc), and then moving to custom ROMs.

    [* Using 120hz? (not confirm but 2 users have suggested doing this has solved sluggish touch issues for them)]

    If this method works for you do not update firmware unless you are sure that will work
    This is not a global issue, only a limited number of people face it!
    Also, users have faced ghost touch issues on MIUI 12.5.3.0+ versions aswell, so this is not something custom from related! It is hardware/firmware level

    Do not report bugs with mods or custom kernels.

    You can chat with me on Telegram: https://t.me/kubersharma001chat
    12
    Hey. just wanted to notify you all that I am going to remove the "Smart Charging" feature in future builds, Also I suggest using mods/ modules which simulate similar behavior as the smart charging feature IS NOT RECOMMENDED!
    BECAUSE:

    A bunch of Xiaomi devices (at least vayu, surya etc for sure) (or lets say some QUALCOMM devices in general too) have somewhat buggy PMIC ( i.e Power Management IC) and facing the issue is rare in most scenarios (some can face it without using these features too) till you don't mess power_supply or anything related to PMIC mods or features like smart charging, idle state charging, those Magisk modules for smart charging like ACC or whatever can trigger the PMIC to bug out as well and in that case your battery will be drained, won't charge unless you reboot to bootloader till the time you can. If you don't do that and let it drain (which I remind you might be quicker than usual) it might just go DEAD.

    Ref: https://github.com/lybdroid/poco-x3-pro/issues/1

    Most people might not face the issue, but still, there is a chance, and let's not risk it. I would suggest avoiding draining your battery to 0.

    I am not saying the above-mentioned features or mods are bad or broken but there is a slight chance something bad can happen, so my removal of this feature on vayu is just a safe play till we know something better
    "Be safe than sorry"
    11
    Fixes/Changes done for next build/update:
    - Yellow tint on screen
    - Lowers vibration intensity to a decent level
    - Force volume steps to 25 as some MIUI vendors are forcing this to insane 150 volume steps, yikes.
    - Fix Recents Overview sluggishness
    - Ship GCamGoPrebuilt instead of AOSP camera2
    - Other minor improvements and fixes.
    9
    BTW, Incase anyone wasn't aware you can see last 24 hour active/installs statistics here:
    vayu is now under top10


    Changes for Next update:
    Fixed WFD showing green screen while casting to laptop