• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Development [ROM] [OFFICIAL] ArrowOS 11.0 [android-11.0][vayu/bhima]

Search This thread

Pero55

Member
Jan 28, 2011
15
1
Guess the only way to address these types of issues is to do a full reset, install the latest ROM from scratch again and then try use the Bank/GPay types of apps.
If the issue persists then roll back to the last working ROM (reinstall from scratch) with those apps.

Sharing the results might actually help the developer @kubersharma to be able to pinpoint the reason of this.

In my own personal case the Gpay/Bank app stopped working with Magisk installed on 8th Oct build even though the Safetynet passed Basic checks. Even after removing the Magisk completely the apps didn't work.
However after removing Magisk twice via TWRP and removing apps, GPay reinstall started working, but my bank App still refuses to work.
Since then I have updated to 14 Oct ROM via system updater and the status remains same.

Thanks.
This is not a problem only arrow rom. This does apply to other rom, pixel experience, ppui, havoc os, etc
 

Colonelex

Member
Aug 16, 2021
31
10
Updated to 1/11 patch. Didn't face any issues.

Before I updated the patch, I actually managed to fix my bank app by reinstalling the app. When I logged in and check the registered devices with my bank app, I found M2102J20SI (current device) and M2102J20SG. I think the model changed in one of the patches thus the bank app could not recognise the device and barred me from logging in.
 
  • Like
Reactions: kd276

RitoShimada

Member
Nov 22, 2018
5
0
Hi, I'm currently on MIUI 12.5.5.0. I'm wondering if I have to roll back to 12.5.2.0 for the flashing to work or can I just directly flash ArrowOS without worrying too much? Also, should I root my device in the process?
 

kd276

Senior Member
Jun 14, 2021
356
84
Hi, I'm currently on MIUI 12.5.5.0. I'm wondering if I have to roll back to 12.5.2.0 for the flashing to work or can I just directly flash ArrowOS without worrying too much? Also, should I root my device in the process?
I'm on the last EEA firmware (12.5.3.0.RJUEUXM) and it work flawlessy. No need to root (with magisk) if you do not need it.
 
  • Like
Reactions: RitoShimada

RitoShimada

Member
Nov 22, 2018
5
0
I'm on the last EEA firmware (12.5.3.0.RJUEUXM) and it work flawlessy. No need to root (with magisk) if you do not need it.
So is that assuming MIUI 12.5.5.0 global is compatible with the flashing? I was pondering upon rooting because it seems later generations of Android phones basically give users access to apps and services rooting used to do back then for older gens.
 

kd276

Senior Member
Jun 14, 2021
356
84
So is that assuming MIUI 12.5.5.0 global is compatible with the flashing? I was pondering upon rooting because it seems later generations of Android phones basically give users access to apps and services rooting used to do back then for older gens.
Guess so, quoting the description:
MIUI 12.5.2.0 global or you can use any latest R firmware from your region as well (firmware only)
 
  • Like
Reactions: RitoShimada

FluffySinon

New member
Nov 6, 2021
3
0
Good day everyone,

I had installed newest version of arrow os 11 (ArrowOS v11.0 |GAPPS vayu nov.1,2021 with latest update) on my Poco X3 Pro (team win recovery3.5.2_11-0), it runs awesome, but.

I've noticed one (big) problem with spotify and youtube. When i watch films, or listen to music using 3.5 mm jack port, phone is freezing and restarting randomly to POCO logo. Any ideas, what can be wrong ?
 

FluffySinon

New member
Nov 6, 2021
3
0
Good day everyone,

I had installed newest version of arrow os 11 (ArrowOS v11.0 |GAPPS vayu nov.1,2021 with latest update) on my Poco X3 Pro (team win recovery3.5.2_11-0), it runs awesome, but.

I've noticed one (big) problem with spotify and youtube. When i watch films, or listen to music using 3.5 mm jack port, phone is freezing and restarting randomly to POCO logo. Any ideas, what can be wrong ?
this only happens in case of yt and spotify, i had forgotten to add.
 
Last edited:

FluffySinon

New member
Nov 6, 2021
3
0
Good day everyone,

I had installed newest version of arrow os 11 (ArrowOS v11.0 |GAPPS vayu nov.1,2021 with latest update) on my Poco X3 Pro (team win recovery3.5.2_11-0), it runs awesome, but.

I've noticed one (big) problem with spotify and youtube. When i watch films, or listen to music using 3.5 mm jack port, phone is freezing and restarting randomly to POCO logo. Any ideas, what can be wrong ?

Good day everyone,

I had installed newest version of arrow os 11 (ArrowOS v11.0 |GAPPS vayu nov.1,2021 with latest update) on my Poco X3 Pro (team win recovery3.5.2_11-0), it runs awesome, but.

I've noticed one (big) problem with spotify and youtube. When i watch films, or listen to music using 3.5 mm jack port, phone is freezing and restarting randomly to POCO logo. Any ideas, what can be wrong ?
Happens only on mobile data #new discovery
 

Gracko

Member
Feb 24, 2016
13
0
Hello, on the latest 1.11 update im facing random reboots. First while playing a game, second and third while browsing internet (on Google Chrome), gaps version
 

Gaboros

Senior Member
Sep 9, 2011
406
228
Sound enhancer not working (with bluetooth)? Even if I turn on or change the settings, nothing changes. I'm on the latest official.
 

Colonelex

Member
Aug 16, 2021
31
10
Updated to 11/11. Didn't notice any difference.

Edit: Saw some new stuff in Accessibility which I think weren't there before. Not sure what they do though.
 
Last edited:
  • Like
Reactions: kd276

PsuchO

Member
Dec 22, 2012
19
2
Can someone solved problem with missing fingerpring unlock? Sometimes i had no working fingerprint when i touched it. I mean it's work wher i press the unlock button, but it's isn't work where i just touch the button. I was happen 1-2 times from 10
Sorry for my eng
 

Top Liked Posts

  • 1
    New update, 01_21_2022, testing. Seems all ok.
  • 3
    Some fast questions:

    1. I'm custom to use TWRP, whats the difference to use ArrowOS Recovery? Any benefits?
    (I've read that you cant flash .zip files in Arrows Recovery, correct?)

    2. After reading this Detailed information about our GApps and Vanilla build types i take it that the vanilla builds are for us that wants to use microG? Its Signature spoof ready? (i know it was in older builds, this still true)?

    3. Are people using magisk without any issues? (safetynet is not an issue for me)

    4. Is OTA updates working or do you need to sideload / use recovery for updates?

    Cheers.
    1) there is no more a ArrowOS Recovery, you can continue use TWRP or ORANGE FOX.
    BUT for ArrowOS 12, in order to do any update or install anything through Recovery, first you have to
    remove your PIN , because your internal memory will not be decrypted at all

    2) Vanilla Roms, are pure/clear versions of ROM, without any of Google's Playstore or Application.
    MicroG is able to be used also with the GAPPS version. It's up to you wich GApps package you will install

    3) magisk is working flawlessy even in ArrowOS_12

    4) OTA works if first remove the lockscreen (pin, pattern...)
    2
    if you use pixel experience or arrow you can use ngk kernel which gives way better performance
    I just got this phone for use with a Gamesir. Any advantage to using this ROM (or any other custom ROM) over the stock MIUI when it comes to gaming? Thanks!
    2
    This night my mobile data plan was drained, mobile data usage shows 4GB was used for "system updates" when the phone was not connected to a wi-fi overnight. Also strangely enough the battery was drained overnight by 20% by Google Play Service. Google play is configured to not update and not search for updates on both Wi-Fi and mobile data.
    ArrowOS v11.0 | GAPPS, vayu, October 14, 2021. Preferences are set to never check for updates.

    There is update of ArrowOS v11.0 on December 2021, so if you did not disable "system updates" it is likely to download the ROM.

    If you have a limit on your data usage, you can set the data limitation and notification. You can also turn on data save mode and adjust Apps you don't want it to use your mobile data, including Google Play Service.

    Google Play Service is different from Google Play Store.

    It will always run in the background for many services like Find my phone, Location service, remote lock, nearby share and many more. Some other non-Google Apps relies on Google Play Service for it's functional.

    Google Play Service will update itself even if you set the setting to never update in Google Play store.

    When Google Play Service did an update, it will run some optimizations of the system, so it will drain battery faster.
    1
    Happy winter holidays, merry Christmas, and also a happy new year in advance. 🎄🎄☃️🎁🤶🎅☃️🎄🎄

    Latest ArrowOS 11.0 builds were released on 16th December

    Include these notable changes:
    - December ASB
    - Misc fixes and improvements
    - Set SSR level to workaround rare carrier/modem crashes etc.

    [ Additionally, you can learn to see changes directly in my GitHub repositories by checking the commits
    1. Device configuration: https://github.com/ArrowOS-Devices/android_device_xiaomi_vayu/commits/arrow-11.0
    2. Kernel sources: https://github.com/ArrowOS-Devices/android_kernel_xiaomi_vayu/commits/arrow-11.0
    3. Vendor blobs: https://github.com/ArrowOS-Devices/android_vendor_xiaomi_vayu/commits/arrow-11.0
    ]
    ROM changelogs can be seen here:
    You can download builds from
    (select arrow-11.0 and your build type. vanilla/gapps under official section)

    NOTE
    - Works with ANY MIUI R firmware (12.0.x.0 to 12.5.x.0)
    - You can use ArrowOS Recovery (https://sourceforge.net/projects/kubersharma001/files/vayu/ArrowOS-recovery/) or TWRP

    If you like my work, please consider donating it helps me in many ways to continue such a journey:
    Paypal
    : https://www.paypal.com/paypalme/kubersharma001
    UPI: [email protected]
    Thank you mate for all your hard work, very happy of Arrow 11 builds. Happy holidays and happy new year too.
    1
    4. Is OTA updates working or do you need to sideload / use recovery for updates?

    Cheers.
    4. It works
  • 62
    logo.png

    ArrowOS for POCO X3 PRO (vayu|bhima)

    ABOUT
    ArrowOS
    is an AOSP/CAF based project started with the aim of keeping things simple, clean and neat.

    Website: https://arrowos.net
    Telegram: Channel | TG Portal/Links
    Github: https://github.com/ArrowOS
    Code Review: review.arrowos.net
    E-mail: arrowos.contact
    PayPal: Donate to us
    Blog: blog.arrowos.net

    Checkout more documentation at (maintainership/contributing): Check this out

    WHAT WORKS?
    1. Audio
    2. Bluetooth
    3. Camera
    4. Dt2w
    5. Display
    6. Torch
    7. Battery/Notification LED
    8. Sensors
    9. Radio, data. networks (2g,3g,4g+volte,vowifi etc)
    10. Refresh rates(120,90,60)
    11. Headset port, charging ports, etc
    12. GPS/Location
    13. Almost everything?
    NOTE:
    • ArrowOS ships with source compiled vendor and odm partitions.​
    WHAT DOESN'T WORK ?
    1. You tell us.​
    Be sure to include a log: check how to

    DOWNLOADS
    Click here to Download
    Tip: Select OEM -> Device, choose Arrow version, choose the build type: "GAPPS" or "VANILLA" to download.

    Instructions
    FIRST INSTALL?:
    • Remove any fingerprint, PIN, or password in MIUI
    • Unlock the bootloader
    • Transfer ROM to internal storage
    • Install any suitable recovery
    • Flash ROM zip file
    • Do a data wipe in recovery (format data)
    • Reboot to the system, wait and enjoy
    FLASHING UPDATES?:
    • Download via OTA Updater and let it automatically install; OR
    • Download an update, transfer to internal/external storage (always check file sha256)
    • Flash ROM zip and reboot.
    Read our blog article/post about:
    * HOW-TO report a bug
    * GAPPS and VANILLA variants
    * Checking build integrity

    ROM Source: https://github.com/ArrowOS
    Kernel Source: https://github.com/ArrowOS-Devices/android_kernel_xiaomi_vayu

    ROM Firmware Required: MIUI 12.5.2.0 global or you can use any latest R firmware from your region as well (firmware only)
    Donate: https://www.paypal.me/kubersharma001
    UPI: [email protected]
    16
    You can download ArrowOS Recovery if you like or use other 3rd party recoveries

    FAQ::

    Tip: If you are new to custom ROMs, I would suggest taking a TWRP backup/partition backup (usually: persist, efs, firmware partitions, etc) saved in your cloud or computer.

    Q1: How can I update to a new update?
    A1: Flash ArrowOS recovery and download and install the update from the OTA Updater application OR Download from arrowos.net [codename: vayu] boot to TWRP and flash it; if you are using ArrowOS recovery, copy build zip to external storage (sdcard, USB otg etc) and install via "Apply system update option"
    If you are on PC, you can also use adb sideload while being on recovery

    Q2: Why is Mi8 (dipper)/walleye oreo or any other device's build fingerprint and desc props/values are used?
    A2
    : As most of the custom ROM users might be aware that SafetyNet cannot pass with devices own build fingerprint props due to the multiple checks or other aspects which is unknown, done by the OEM/Google which fails hence nowadays devices are generally spoofed with build fingerprint and description props of devices which passes CTS/SafetyNet like from a device with Android Oreo or Pre Android Oreo (walleye oreo; mi8 oreo, etc) or from latest Pixels (like redfin)
    This device as of now uses Mi8 (dipper) build fingerprint and description to pass SafetyNet!
    (In future release: It can change to Pixels or some other device too just to "Pass SafetyNet checks") hence don't consider this as some lame reason to spam or message about.

    Q3: Facing ghost touch issues on your device?
    A3:
    This issue has been recognized by Xiaomi as a fault in their MIUI firmware, I am not yet sure if this is completely a hardware fault or just a firmware fault with specific variants
    I have an Indian 8/128 variant and I never faced such issues.
    Since Xiaomi does not release newer changes done to the kernel source, we are stuck with the initial R source release hence we don't know what changes they made to fix it on MIUI if they ever did
    But, some people have fixed ghost touch issues by :
    * Flashing MIUI 12.0.4.0/12.0.6.0 full MIUI rom, booting to it, setup up everything (like registering the fingerprint, etc), and then moving to custom ROMs.

    [* Using 120hz? (not confirm but 2 users have suggested doing this has solved sluggish touch issues for them)]

    If this method works for you do not update firmware unless you are sure that will work
    This is not a global issue, only a limited number of people face it!
    Also, users have faced ghost touch issues on MIUI 12.5.3.0+ versions aswell, so this is not something custom from related! It is hardware/firmware level

    Do not report bugs with mods or custom kernels.

    You can chat with me on Telegram: https://t.me/kubersharma001chat
    13
    Hey. just wanted to notify you all that I am going to remove the "Smart Charging" feature in future builds, Also I suggest using mods/ modules which simulate similar behavior as the smart charging feature IS NOT RECOMMENDED!
    BECAUSE:

    A bunch of Xiaomi devices (at least vayu, surya etc for sure) (or lets say some QUALCOMM devices in general too) have somewhat buggy PMIC ( i.e Power Management IC) and facing the issue is rare in most scenarios (some can face it without using these features too) till you don't mess power_supply or anything related to PMIC mods or features like smart charging, idle state charging, those Magisk modules for smart charging like ACC or whatever can trigger the PMIC to bug out as well and in that case your battery will be drained, won't charge unless you reboot to bootloader till the time you can. If you don't do that and let it drain (which I remind you might be quicker than usual) it might just go DEAD.

    Ref: https://github.com/lybdroid/poco-x3-pro/issues/1

    Most people might not face the issue, but still, there is a chance, and let's not risk it. I would suggest avoiding draining your battery to 0.

    I am not saying the above-mentioned features or mods are bad or broken but there is a slight chance something bad can happen, so my removal of this feature on vayu is just a safe play till we know something better
    "Be safe than sorry"
    11
    Fixes/Changes done for next build/update:
    - Yellow tint on screen
    - Lowers vibration intensity to a decent level
    - Force volume steps to 25 as some MIUI vendors are forcing this to insane 150 volume steps, yikes.
    - Fix Recents Overview sluggishness
    - Ship GCamGoPrebuilt instead of AOSP camera2
    - Other minor improvements and fixes.
    9
    BTW, Incase anyone wasn't aware you can see last 24 hour active/installs statistics here:
    vayu is now under top10


    Changes for Next update:
    Fixed WFD showing green screen while casting to laptop