Development [ROM][OFFICIAL] ArrowOS [Android 11][sweet]

Search This thread
New build pushed with the following changes:
- Updated blobs from MIUI 12.0.15.0 Global
- Fixed infrarred blaster
- Cleaned up vendor (reduced zip size 100MB~)

If someone had bootloops and rolled back to the previous build, this build should be good to flash now, I missed a thing in previous build which could cause bootloops on some cases, sorry for that
thank you so much
 
  • Like
Reactions: PsyCoder420
New build pushed with the following changes:
- Updated blobs from MIUI 12.0.15.0 Global
- Fixed infrarred blaster
- Cleaned up vendor (reduced zip size 100MB~)

If someone had bootloops and rolled back to the previous build, this build should be good to flash now, I missed a thing in previous build which could cause bootloops on some cases, sorry for that :/.
Please use Portuguese translation (in ArrowOS https://crowdin.com/project/arrowos )
 
  • Like
Reactions: PsyCoder420

LeDiable

Senior Member
  • Feb 18, 2010
    219
    65
    Mumbai
    Daniel, any plans on letting the vanilla build have call recording?

    Also, after flashing the vanilla build was unable to flash basic Nickgapps from the recovery, could it be due to the vendors?
     

    ZainBilq

    Senior Member
  • Nov 29, 2014
    971
    385
    Redmi Note 10 Pro
    Daniel, any plans on letting the vanilla build have call recording?

    Also, after flashing the vanilla build was unable to flash basic Nickgapps from the recovery, could it be due to the vendors?
    Even Vanilla build will have call recording if you flash latest Flamegapps basic.

    You can flash any gapps over vanilla build for call recording feature - condition is those gapps should not have Google dialer. Otherwise, AOSP dialer(which ROM has) will be replaced by Google Dialer while/after flashing gapps. I think you understand my point here.

    Cheers!
     
    • Wow
    Reactions: LeDiable

    LeDiable

    Senior Member
  • Feb 18, 2010
    219
    65
    Mumbai
    Y
    Even Vanilla build will have call recording if you flash latest Flamegapps basic.

    You can flash any gapps over vanilla build for call recording feature - condition is those gapps should not have Google dialer. Otherwise, AOSP dialer(which ROM has) will be replaced by Google Dialer while/after flashing gapps. I think you understand my point here.

    Cheers!
    I tried that with the builds before the custom vendor shift with NickGapps Core to no avail, led me to believe that Dani had disabled it. If it's working with Flame then let me give it a shot.
     

    LeDiable

    Senior Member
  • Feb 18, 2010
    219
    65
    Mumbai
    Even Vanilla build will have call recording if you flash latest Flamegapps basic.

    You can flash any gapps over vanilla build for call recording feature - condition is those gapps should not have Google dialer. Otherwise, AOSP dialer(which ROM has) will be replaced by Google Dialer while/after flashing gapps. I think you understand my point here.

    Cheers!
    @daniml3 Daniel could you please confirm this once and for all?

    Is call recording disabled even on the Vanilla version with Flame Gapps?
    I tried it with NickGapps on the previous builds and the option never showed up on the AOSP dialer in spite of making the dialer default.
     

    LeDiable

    Senior Member
  • Feb 18, 2010
    219
    65
    Mumbai
    @daniml3 Daniel could you please confirm this once and for all?

    Is call recording disabled even on the Vanilla version with Flame Gapps?
    I tried it with NickGapps on the previous builds and the option never showed up on the AOSP dialer in spite of making the dialer default.
    @daniml3 Dani, would be great if you could help shed some light on this topic once and for all please.
     

    ph3n0m.

    Member
    May 11, 2021
    18
    3
    Hi, I'm using a RN10Pro with ArrowOS. I'm trying to install nikgapps core and im getting this error.

    "Updater process ended with Error:1 error installing ZIP file"

    -> fetching system size
    -/system available size: 239652 KB
    -/product availabel size: 245200 KB
    - Gapps size: 152851 KB

    From this output ti looks like enough space? But still the error?
    -I have debugging enabled
    - No passcode

    Please help, this is R11.1
     

    LeDiable

    Senior Member
  • Feb 18, 2010
    219
    65
    Mumbai
    Hi, I'm using a RN10Pro with ArrowOS. I'm trying to install nikgapps core and im getting this error.

    "Updater process ended with Error:1 error installing ZIP file"

    -> fetching system size
    -/system available size: 239652 KB
    -/product availabel size: 245200 KB
    - Gapps size: 152851 KB

    From this output ti looks like enough space? But still the error?
    -I have debugging enabled
    - No passcode

    Please help, this is R11.1

    Yup, doesn't work mate. Didn't work for me too post the new vendor modified installation, try it with FlameGapps from https://flamegapps.github.io/ . Works well.
     

    Top Liked Posts

    • There are no posts matching your filters.
    • 7
      New build available with the following changelog:
      • Merged June security patch
      • Fixed Amazon Prime Video HD and Netflix HDR
      • Updated blobs from MIUI 12.5.3.0
      • Some other under the hood improvements
      6
      New build available with the following changelog:
      - Added aptX support
      - Added KCAL settings for color adjustment
      - Fixed WiFi Display
      - Added a setting for having 2 rows in the QS instead of 3
      6
      New build available with the following changelog:
      • Switched to OSS display stack
      • Switched to OSS media stack
      • Fixed KCAL settings
      • Added a preview image to the KCAL settings page
      • Fixed screen flickering completely
      • Reduced delay for device specific settings to apply at boot
      5
      Automatic build schedule has been re-enabled. This means a new build will come out each two days from monday to friday, regardelss of the changes, hence there might be updates with zero changes. Those builds are always safe to flash unless told otherwise.

      Forgot to mention here but here it is :)
      3
      *just figured out* the 2.1mp problem I have with Anx Cam might be related to prebuilt vendor, because I don't have this issue with DotOS which seems to be using MIUI vendor
      That "issue" comes from missing libraries. You must flash the following magisk module for correct resolution on ANX:
    • 30
      logo.png

      ArrowOS

      ABOUT
      ArrowOS
      is an AOSP/CAF based project started with the aim of keeping things simple, clean and neat.

      Website: https://arrowos.net
      Telegram: Channel | TG Portal/Links
      Github: https://github.com/ArrowOS
      Code Review: review.arrowos.net
      E-mail: arrowos.contact
      PayPal: Donate me | Donate to the project
      Blog: blog.arrowos.net

      Checkout more documentation at (maintainership/contributing): Check this out

      WHAT WORKS?
      • SELinux is enforcing
      • WiFi
      • Audio
      • RIL
      • GPS
      • Cameras
      • Flashlight
      • NFC
      • Fingerprint
      • Vibration
      • Bluetooth
      • FM Radio
      • VoLTE
      • Double tap to wake

      WHAT DOESN'T WORK?
      • You tell me

      For reporting bugs, be sure to include a log : check how to


      HOW TO INSTALL AND NEEDED INFORMATION
      • Follow the detailed installation guide here
      • The mentioned guide contains a recommended recovery and instructions of how to use it as well

      DOWNLOADS
      Click here to download the Android 11 OFFICIAL version
      Click here to go to the support Telegram group

      Read our blog article/post about:
      HOW-TO report a bug
      GAPPS and VANILLA variants
      Checking build integrity

      ROM Source: https://github.com/ArrowOS
      Kernel Source: ArrowOS-Devices

      Contributors
      daniml3
      ROM OS Version: Android 11
      ROM Kernel: Linux 4.x
      Based On: AOSP
      11
      Well, as some of you already saw, new build, with the following changelog:
      - Switched to the Pixel Power HAL (libperfmgr)
      - Improved idle drain
      - Fixed headphone buttons
      - Fixed yellow tint and improved display colors
      - Added WiFi Display support
      - Reworked the lights service
      - Moved device specific settings into the settings homepage
      - Reserved 250MB of space in each dynamic partition for installing addons
      - Set default DPI to 392
      - Reduced bootanimation start delay
      10
      Just to let you all know, if the device has more than 100 installations in last 24 hours (check at stats.arrowos.net/recent), it will have automatic builds each Monday, Wednesday and Friday. Those automatic builds are safe to flash even if I don't announce them (I only announce if they have device side changes), unless told otherwise.
      10
      New build pushed with the following changes:
      - Updated blobs from MIUI 12.0.15.0 Global
      - Fixed infrarred blaster
      - Cleaned up vendor (reduced zip size 100MB~)

      If someone had bootloops and rolled back to the previous build, this build should be good to flash now, I missed a thing in previous build which could cause bootloops on some cases, sorry for that :/.
      7
      New build available!

      Changelog:
      - Removed the "SIM is HD capable" notification
      - Improved automatic brightness
      - Enabled color profiles
      - Fixed fingerprint in apps
      - Enabled burn-in protection
      - Fixed AOD counting as SOT
      - DT2W on AOD fixed

      OTA pushed

      Get it at https://www.arrowos.net/download/sweet