[ROM][OFFICIAL][Beryllium][CAF][10.0] PixelDust Android 10 for Beryllium
- Thread starter Dev_Mashru
- Start date
@Dev_Mashru
Tried installing PixelDust ver. July 18, but having boot loop.
I managed to run 'adb logcat' and it shows these lines:
My steps on installing were:
- wipe dalvik/cache/system/data/vendor
- flash rom
- wipe dalvik/cache
- boot to system
Below I attached the screenshot of 'adb logcat'.
Something wrong on my installation steps?
Tried installing PixelDust ver. July 18, but having boot loop.
I managed to run 'adb logcat' and it shows these lines:
Code:
01-13 20:10:27.358 549 549 I hwservicemanager: getTransport: Cannot find entry [email protected]::IVr/default in either framework or device manifest.
01-13 20:10:27.359 1776 1776 E VrService: hw_get_module vr failed: -2
01-13 20:10:27.360 1776 1776 E [email protected]: Could not get passthrough implementation for [email protected]::IVr/default.
01-13 20:10:27.577 560 887 I ServiceManagement: getService: Trying again for [email protected]::ICryptfsHw/default...
01-13 20:10:27.621 856 856 W ServiceManagement: Waited one second for [email protected]::ISensorManager/defaultMy steps on installing were:
- wipe dalvik/cache/system/data/vendor
- flash rom
- wipe dalvik/cache
- boot to system
Below I attached the screenshot of 'adb logcat'.
Something wrong on my installation steps?
Attachments
I mean do I have to install magisk module for recording calls?
I have a paid dialer, Drupe dialer which has call recording option available. However after recording call, while playing it, I can't hear the caller or callee audio.
Didn't have this issue with the dialer on MIUI.
I have never used Drupe dialer so I don't have any idea if a magisk module is needed, but I think I know why it's not working. Please test it with the next build.
Most of the dialers/ call recorders in play store are fakes which use the microphone to try and catch as much audio. Unless your in-call volume is full, it wouldn't have much success catching the other end. I recommend you stick with Lineage based ROMs or switch to ReloadedOS (only ROM that's CAF + call recording, but passes safety net only with magisk). I respect your frustration, infact call recording is the single most important feature to have in a ROM, especially for people who do and talk business. It can be a life and money saver. I hope most ROMs take it up someday.
Last edited:
I was also a paid user for Drupe for their interface and using it for long I uninstalled the app long back. It has lots of bugs which when reported they will acknowledge and do nothing. Most new version which they release will have the claim "Bug fixes and Improvements" which i always wonder what they are doing to make each release more and more ****tier. If you are not paying for the app, its fine. But imho that app should not be a paid one.
Hey guys,
I have pushed an update with the latest security patch. Get it here.
Changelog:
Device Changelog:
I have pushed an update with the latest security patch. Get it here.
Changelog:
Device Changelog:
Last edited:
Will check it out when I come back to this ROM. This is a very important feature for me. Hopefully the newest update fixed it to record calls from Drupe dialer and able to listen to them?
It doesn't encrypt the phone out of the box so you'll manually have to encrypt it.
As I said, I don't use drupe dialer so you will have to test and report back.
Gaming mode preference and battery percentage indicator both work. I personally daily drive this rom and haven't found any issues. Did you use a custom kernel?
Attachments
So far the best performance rom, Everything work just fine.
battery and heat is manageable. even on gaming too.
is there any way to hide the navigation on the bottom of the screen when opening keyboard?
and can i increase the size of the back gesture swipe thickness? often the gesture did not register. even with high/low sensitivity. the arrow showed up but sometime it did not go "back".
battery and heat is manageable. even on gaming too.
is there any way to hide the navigation on the bottom of the screen when opening keyboard?
and can i increase the size of the back gesture swipe thickness? often the gesture did not register. even with high/low sensitivity. the arrow showed up but sometime it did not go "back".
Reading the thread and it seems like very similar to Corvus OS. Lot of customisations but lack of basic features like hide frequent app suggestions from App drawer and Navigation bar at bottom of the keyboard even after hiding the pill in Full screen gestures.
PE+ is far better. I agree PE doesn't have lot of customisations but a Pure stock and clean interface is good.
Have you enabled accidental touch or "back area dead zone"?
As for the other 2 things, I am sorry but it's not possible, at least not right now.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
38
PixelDust ROM is an Android 10 ROM especially built for Google Pixel and Nexus devices.
We rebased the project to Code Aurora Sources, more commonly known as CAF. CAF ROMs are therefore generally considered to be more optimized for Qualcomm’s Snapdragon SoCs than AOSP ROMs (in performance, RAM management, battery, etc.). We strive to keep the PixelDust Experience as close as possible to Android as Google intended. We add a decent selection of the coolest custom ROM features that would've been missed if they hadn't been included.
The PixelDust Crew would highly appreciate if you would take a little of your time and leave your valuable feedback, your honest opinion or just say hello. If you should encounter a bug, or some kind of glitch that seems to be abnormal and you are pretty sure that it is related to the ROM (and not related to any special apps or mods you flashed on top), then please give as many details as possible.
Special shoutouts to Roger.T for his amazingly designed wallpapers, logos and the best bootanimation I ever had on my Pixel!!! If you like our work, please consider to buy Roger the first beer, and a few more for the other team members and spezi77. Cheers!
BTW, please consider to take a logcat, because you know that:
DespairFactor said:
Disclaimer:
If your device fails to comply with your standards of what you consider functioning, I am not liable. This is provided free of charge and does not come with a warranty. Although, if you provide a log, I can provide some sort of assurance that I will look into your issue.
Not working:
Thanks to all development teams, e.g. ABC ROM, AICP, AOKP, AOSPA, AOSP Extended, BenzoROM, Bootleggers, CarbonROM, crDroid, DirtyUnicorns, Havoc OS, LOS, MSM-Xtended Project, OmniROM, Potatoes Project and PureNexus, we borrowed a few features and tweaks from.
Source code:
Here
XDA:DevDB Information
Pixeldust, ROM for the Xiaomi Poco F1
Contributors
Dev_Mashru
Source Code: https://github.com/pixeldust-project-caf
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2020-06-04
Last Updated 2020-07-1719Hey guys,
I have pushed an update with the latest security patch. Get it here
Changelog:
Device changelog:
13Hey guys,
I have pushed out an update. Get it here.
Changelog:
Gapps are now included in the rom.
Bumped security patch to June.
Added per app profiles.
Added dirac.
Upstreamed kernel to 4.9.228.
Other misc changes.
Bugs:
When charging the phone using the original charger, apps like fkm detect it as discharging, but it actually charges.12Hey guys,
I have pushed an update with the latest security patch. Get it here.
Changelog:
Device Changelog:
11
