Development [ROM][OFFICIAL] DotOS [Android 11][sweet]

[m.mohtashimsadiq]

Charging Slowly!!!!!!!!

 

[seonung1]

Please fix the screen flickering problem before aod works. this rom is so good, but I can't use this rom because of aod problem (aod is important to me)

Sorry for bad English using a translator

 

[mi-girl]

Charging Slowly!!!!!!!!

I can confirm.

 

[2spirit]

Charging seems to be OK for me. ( firmware EEA )

I just found a little bug, function "hold to torch" does not work.

 

[Libri Walker]

Hello, first of all, thank you for your hard works on the rom, I like it very much, I found some bugs so I think I should share it here:

1. DC Dimming go max brightness in lockscreen and go away when unlock (if use fingerprint when the screen is off then max brightness in homescreen also) ( I only got this bug in Gapps build)
2. Set wallpaper using Customization is not centered, its slight off to the right.
3. Hold to torch doesn't work
4. Can't deep sleep with Pocket mode or AOD (drop from 80% to 65% of battery overnight)
5. In Thermal Profiles setting, under Enable game mode said "Increases touch sampling rate to 180Hz", so is the rom only give 180Hz Touch sampling rate max? (or just typo)

Other than these bugs the rom is very good. Very smooth, good battery life (5 hours of SOT from 90% to 30% in my first boot), fast charging works (30% to 90% in ~45 minutes).

Update: Gapps build come with Pixel launcher with no customization on homescreen, Vanilla build come with DotOS launcher with icon pack support, hide app, remove google widget, double tap to sleep (literally have to clean flash again, pain). DC Dimming seem to works properly in vanilla build

P/s: English is not my first language, please don't call the grammar police (｡ • ́︿ • ̀｡)

 

[Nalub]

Hello. Is the camera fully working, like on stock rom?

 

[Libri Walker]

Hello. Is the camera fully working, like on stock rom?

Just basic camera app, if you want camera like stock rom, use ANXCamera

 

[Stan m]

I have a couple of questions.
1) What does it mean in features (last line) microg support? I dont want to use gapps and I will use microg. dont all roms that come without gapps can be used with microg?
2) I have SWEETIN and not SWEET (indian version). Can I still use this rom? ( i dont care about camera).
3) It says use latest firmware. How to check the firmware version and how to update it?
4) I am waiting for my bootloader unlock cooldown. After that which recovery is recommended (TWRP or Orange)? And what are the instructions for flashing this custom rom first time (erase which ones? eg with dalvik data, vendor too)? I just want to know the instruction to install it first time with micro g ( and I guess I have to flash micro g after every update).
Sorry for so many questions. I would really appreciate your help!
Thank you!!

 

[Libri Walker]

I have a couple of questions.
1) What does it mean in features (last line) microg support? I dont want to use gapps and I will use microg. dont all roms that come without gapps can be used with microg?
2) I have SWEETIN and not SWEET (indian version). Can I still use this rom? ( i dont care about camera).
3) It says use latest firmware. How to check the firmware version and how to update it?
4) I am waiting for my bootloader unlock cooldown. After that which recovery is recommended (TWRP or Orange)? And what are the instructions for flashing this custom rom first time (erase which ones? eg with dalvik data, vendor too)? I just want to know the instruction to install it first time with micro g ( and I guess I have to flash micro g after every update).
Sorry for so many questions. I would really appreciate your help!
Thank you!!

1. I am not sure but I think that mean you could use microg, but I dont use it so idk
2. yes
3. check for update in device setting, if there is no update then you are good to go
4. I think you should use TWRP, I heard Ofox has decrypt bug or something like that. You install TWRP, Wipe Data, reboot to TWRP, flash Rom, flash gapps (and magisk if you need that), Wipe Data again, and reboot. (Thats how I do it, can't say it is the proper way but it works)

 

[Stan m]

1. I am not sure but I think that mean you could use microg, but I dont use it so idk
2. yes
3. check for update in device setting, if there is no update then you are good to go
4. I think you should use TWRP, I heard Ofox has decrypt bug or something like that. You install TWRP, Wipe Data, reboot to TWRP, flash Rom, flash gapps (and magisk if you need that), Wipe Data again, and reboot. (Thats how I do it, can't say it is the proper way but it works)

Thanks a lot! I bought my phone 2 days ago and i never updated it, nor does it have any updates available. How is that possible? does this mean it is used one?
Also in Dotos, do we have to press the lock button for fingerprint or can we just touch the sensor? It is so annoying to press power button everytime in miui...

 

[Libri Walker]

Thanks a lot! I bought my phone 2 days ago and i never updated it, nor does it have any updates available. How is that possible? does this mean it is used one?
Also in Dotos, do we have to press the lock button for fingerprint or can we just touch the sensor? It is so annoying to press power button everytime in miui...

No you don't have to press the power button, in fact in miui default you also don't have to press the power button, you have to turn on the press to unlock option (maybe you turned that on by mistake). I think it should ask you to update if you bought it new but idk, It could auto update when you didnt notice, don't take my words for it xD

 

[aakashmaji16]

Can someone using Redmi note 10 pro (sweetin) confirm that this rom supports the indian variant (sweetin) or is it require to change the files?
Planning to flash this rom!!

 

[ZainBilq]

Can someone using Redmi note 10 pro (sweetin) confirm that this rom supports the indian variant (sweetin) or is it require to change the files?
Planning to flash this rom!!

No need to change anything. You can flash the ROM.

Cheers!