• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][OFFICIAL][fajita][11] LineageOS 18.1

Search This thread

Eric_Lev

Senior Member
Jan 27, 2019
1,200
2,346
Angers
androidfilehost.com
twrp latest
manual

steps:
installed oos on both slots
installed los and twrp on one slot, after rebooting to recovery found out that the data was encrypted so formatted(the option where you have to enter "yes")
installed los and twrp on the other slot
installed nikgapps after rebooting to revocery
formatted data (option where you enter "yes")
installed magisk after first boot


what am I doing wrong?

 

optimusprime9811

Senior Member
Jan 8, 2015
179
236
india
nn
lineage 18.1 todays weeklies build up go n check here https://download.lineageos.org/fajita/changes/
TODAYS
Changes for fajita


 
  • Like
Reactions: Pablo.x

OhioYJ

Senior Member
Feb 25, 2011
1,529
778
tried this. caused twrp boot loop

i have to do a factory reset before booting or else the phone boots back to recovery

I'll double check this weekend with a clean install on a 6T and update if necessary. I've still been using TWRP on that 6T this entire time and doing updates the way that is described in the guide.
 

jhedfors

Senior Member
Oct 16, 2009
1,451
729
St Paul, AZ
Moto G6
OnePlus 6T
Haven't done an OTA yet, but once I let it install, do i need to flash magisk and gapps again or no? I have seen conflicting posts here before.

Thanks!

I have had no problems recently with OTA keeping Magisk, whether I have TWRP or LOS recovery installed first. If I want TWRP back after OTA, I can flash it and Magisk IN Magisk.
 
  • Like
Reactions: Eric_Lev

Amtrix

New member
May 28, 2021
1
0
I've installed the latest version, and I'm having trouble with audio through Bluetooth. The sound comes from the phone speaker even when connected to the Bluetooth.
 

kendallgreen

Senior Member
Oct 3, 2014
108
8
Google Pixel 4a 5G
After installing LOS 18.1 and MindTheGapps 11-0.0, I am having trouble with PlayStore not loading. I tried reinstalling it without success. How can I get PlayStore to work on MindTheGapps? I don't know but I downgraded LOS 18.1 to 20210506 which allowed me to install Lineage4microG 18.1-20210507 on both slots.
I set up Fdroid and Aurora Store. I didn't have to use MSM tool
 
Last edited:

jabashque

Senior Member
Feb 17, 2017
140
75
I've installed the latest version, and I'm having trouble with audio through Bluetooth. The sound comes from the phone speaker even when connected to the Bluetooth.
Go to Settings -> Connected Devices -> that little cog wheel next to your Bluetooth device, and then turn off HD audio.
SBC HD is being turned on by default in this week's fajita build, but not all Bluetooth devices can handle it. If the BT device doesn't work well with it, the audio will end up playing through your phone instead. Some changes have been merged in since to make SBC HD an optional codec instead of being mandatory, so it won't be automatically enabled by default for new devices, but you'll need to wait for next week for those builds.
 

Camowns

Member
Oct 2, 2017
7
2
Go to Settings -> Connected Devices -> that little cog wheel next to your Bluetooth device, and then turn off HD audio.
SBC HD is being turned on by default in this week's fajita build, but not all Bluetooth devices can handle it. If the BT device doesn't work well with it, the audio will end up playing through your phone instead. Some changes have been merged in since to make SBC HD an optional codec instead of being mandatory, so it won't be automatically enabled by default for new devices, but you'll need to wait for next week for those builds.
Thank you kindly!
 

Saksham03

Senior Member
Jun 15, 2016
75
30
LG G3
OnePlus 6T
After installing LOS 18.1 and MindTheGapps 11-0.0, I am having trouble with PlayStore not loading. I tried reinstalling it without success. To go back to OxygenOS, I have downloaded fw-fajita-10.3.11 and OnePlus6TOxygen_34.J.52_OTA-all...zip. the instructions with fw-fajita-10.3.11 say to boot into Lineage Recovery and enter Advanced Enter fastboot, then on my linux computer enter the following sudo commands. Will this get me to Oxygen-10.3.11? How can I get PlayStore to work
Use MSM tool
 

Top Liked Posts

  • 1
    Yes lots of people have. I flashed OOS firmware to my phone and am running fine. I'm pretty noob at android stuff, but not at linux. My only advice is that all the people failing seem to be trying to cling to TWRP. I say embrace the LOS recovery that they now bundle. Recognize that fastbootD mode in LOS recovery is not the same thing as booting to fastboot via adb. These are two different modes and only fastbootD mode via LOS recovery gives you the permissions you need to make things work.
    Hm, a current TWRP should also support fastbootd-mode. If not directly, it should be possible with this command sequence (from PC):

    fastboot reboot bootloader
    fastboot reboot fastboot

    Now, TWRP should start in fastbootd mode ... if not, replace it with LOS-recovery ;-).

    Ciao
    Kurt
  • 4
    FYI ... firmware 11.1.1.1:

    About updating firmware on fajita:
    If needed, you can download the required files for updating your firmware here (unzip and follow the official instructions ... use LOS recovery in fastbootD mode)
    3
    Hello,

    Thx for the files but when is it needed ?
    Optional if you have already updated your firmware from 10 to 11.
    See the screenshot of my previous post (i.e. vendor security patch level and baseband version).
    2
    Dumb question : how do I get into fastbootD mode ?
    1- Boot up LineageOS recovery
    2- Go to “Advanced” -> “Enter fastboot”
    2
    Its still available on official website as well as ota is working..
    It is back now after being removed for several hours.
    2
    In the last couple of updates i have been getting occasional crash of camera with"can't connect to camera"

    Anyone else with similar issues?
    Yes, I was having crashes happening all the time a couple of weeks ago. This has been working for me so far... Hope it stays that way.

  • 12
    2okPze5.png


    LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.

    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    Instructions :
    Downloads :
    Reporting Bugs
    • DO NOT Report bugs if you're running a custom kernel or you installed Xposed
    • Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
    • If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
    • If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
    Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.

    Code:
    What is your--
    LineageOS version:
    LineageOS Download url:
    Gapps version:
    
    Did you--
    wipe:
    restore with titanium backup:
    reboot after having the issue:
    
    Are you using--
    a task killer:
    a non-stock kernel:
    other modifications:
    
    Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
    9
    @LuK1337 Tahnks for all your hard work.
    Will our beloved 6T also get official 18.1 support?
    Eventually.
    5
    So I went and read through the RTT docs. One way to make sure RTT is disabled is to remove it from the carrier configuration, lol. So I went and did just that:

    UPDATE: So, I found a better way to do this that doesn't break everything else. You can go to /data/user_de/0/com.android.phone/files and edit the carrierconfig file there. It should be something like carrierconfig-com.android.carrierconfig-89148000001882338238-1839.xml. Note that the first number is the SIM ID, so it will be different for each phone. Change the following line:

    <boolean name="rtt_supported_bool" value="true"/>
    becomes
    <boolean name="rtt_supported_bool" value="false"/>

    And reboot! After that, RTT shouldn't be a bother anymore. This is a bit of a hack, but it works! XD
    5
    Why do the builds say nightly and not stable on the download page? I thought the ROM was "official" and stable now?
    lmao.
    4
    Thanks for your reply! I have a noob question, I can find several guides and instructions on how to install Magisk using TWRP recovery. However, I cannot seem to find any guides on how to install Magisk using Lineage OS recovery.

    Probably because most people on this device are using TWRP, myself included.

    You should be able to use the steps for installing Magisk from 8T Guide. (Should be the key word, as I'm using TWRP, this is untested on this device personally. It is how I would do it though if I needed to try it.)

    It's basically just

    In LOS recovery choose:

    - Apply update
    - Apply from ADB

    Now in the terminal on the PC:
    - sudo adb sideload Magisk-v22.1.zip. (remove sudo if you aren't using Linux)

    If you get a warning about them not being signed, choose flash anyways. We should be ready to reboot to the system now.

    The section there about passing safety net will work as well. Just remember the safety net test in Magisk doesn't currently work.