• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][OFFICIAL][ginkgo/willow] Pixel Experience [11.0]

do you like it ?


  • Total voters
    194
Search This thread

Dababab

New member
Dec 2, 2020
1
1
I just wanted to tell the OP / Maintainers a big "THANK YOU!"

For me the ROM is working really fine now for about 6 Weeks, no flaws, nothing... yeah!
 
  • Like
Reactions: acristescu

demil7

Member
Apr 26, 2010
49
13
Is anyone else having issues with WhatsApp calls? After 1 or 2 successful calls the next call causes WhatsApp to freeze, the call won't even connect and I can't hang up. The only fix is a force closure of the app. This is happening to me on 3 of the most recent updates, with a clean install between each one.
 
  • Like
Reactions: moralesnery

moralesnery

Senior Member
Aug 27, 2014
641
366
Is anyone else having issues with WhatsApp calls? After 1 or 2 successful calls the next call causes WhatsApp to freeze, the call won't even connect and I can't hang up. The only fix is a force closure of the app. This is happening to me on 3 of the most recent updates, with a clean install between each one.
Same here. In my case there's no problem if I start the app or get the call when I'm using the phone, but if a call arrives when the phone is in standby mode, the app stays entirely frozen until the user kills it from the settings menu.

Unfortunately I haven't been able to get logcat cause my device is not rooted, but I'll try to reproduce the bug later when debugging.
 

Wills_X

Member
Jul 23, 2016
25
1
Akwa ibom
Hey guys, recently I've been having severe battery drain, sometimes i lose up to 30% on idle mode, i do not want to believe my battery is faulty cos it was excellent when i first flashed this rom, I've tried several ways to fix it, i flashed an update, didn't work, i booted into safemode to see if it was an installed app going haywire since battery stats in settings does not show anything meaningful... battery still drained, any ideas besides a full wipe as that will be my last resort, thank you
 

flexgav

New member
Nov 14, 2012
1
0
Good day, everyone. Thanks for this great experience. But i have some issue - auto brightness doesn't work. Redmi note 8t/willow, android 11, latest pixel experience rom.
 

gsser

Senior Member
Dec 22, 2012
1,381
551
Eskisehir
OnePlus 5T
OnePlus 8 Pro
Hello, one or two years ago i flashed pixelexperience 10 on my mate's redmi note 8. It is still on android 10 and i bet using the same firmware for years. Checked the system updater and it says up to date (probably due to rom being a10 and latest official is a11.)

So, i want to update his phone. I own a oneplus 8 pro and dont really know much about redmi note 8. Before doing anything i wanted to be sure if i could. Got some questions about it.

1. Would updating to A11 official from A10 official require a clean flash? (wiping data or formatting data is not wanted)

2. If there is no need to format or wipe data, would new A11 rom require newer firmware, if so which version?

If you require any details such as about phone page, i can provide screenshots. My mate is saying each reboot takes like 3 4 minutes, cleaned his caches no luck. First thing im going to do is flash whatever the latest recovery is. Then fw or rom depending on your answers.

Thanks...
 

x3r0.13urn

Senior Member
Nov 1, 2012
151
50
Hello, one or two years ago i flashed pixelexperience 10 on my mate's redmi note 8. It is still on android 10 and i bet using the same firmware for years. Checked the system updater and it says up to date (probably due to rom being a10 and latest official is a11.)

So, i want to update his phone. I own a oneplus 8 pro and dont really know much about redmi note 8. Before doing anything i wanted to be sure if i could. Got some questions about it.

1. Would updating to A11 official from A10 official require a clean flash? (wiping data or formatting data is not wanted)

2. If there is no need to format or wipe data, would new A11 rom require newer firmware, if so which version?

If you require any details such as about phone page, i can provide screenshots. My mate is saying each reboot takes like 3 4 minutes, cleaned his caches no luck. First thing im going to do is flash whatever the latest recovery is. Then fw or rom depending on your answers.

Thanks...
Clean flashing always highly suggested whenever switching between A10 to A11 or vice versa. So backup, logout all apps, then format data.

Or even better, flash fastboot latest official A11 MIUI image based on your original firmware (Global, EU, China, IN, ID, or RU) from here https://mirom.ezbox.idv.tw/en/phone/ginkgo/ You may use generic fastboot from Google or MiFlash. MiFlash is recommended - I did once failed use generic fastboot from google when flashing /system image, always failed on flashing /system image, but with MiFlash it worked -- very mysterious indeed. Run clean_all.sh/bat -- DON'T touch anything else, especially script with lock. It will clean all your phone, and bring up to latest official miui A11. Always guaranteed to work, unless you cross flash between Chinese to Global -- I never tried, and I highly suggest NOT to.

After that, it's standard custom recovery rom process - it's familiar with OP8.
 

P17r5

Member
Jan 11, 2021
14
4
After new PE update (no root), phone couldn't pass safetynet (CTS profile match) and now NFC payments are disabled, any fix for unrooted or should I wait for an update?
 
Last edited:
  • Like
Reactions: Pezzo76

sashaProgeek

New member
Nov 16, 2021
1
0
After new PE update (no root), phone couldn't pass safetynet (CTS profile match) and now NFC payments are disabled, any fix for unrooted or should I wait for an update?
Та же проблема

----------

MOD EDIT: English Translation Below

Same problem
 
Last edited by a moderator:

Pezzo76

Senior Member
Mar 14, 2017
109
34
Parma
TWRP.
I have to flash only the latest Android 11 firmware, right?
I installed PE ROM with TWRP at the first time. Now I use PE Recovery and I didn't have any issue.
Every update, firmware or ROM, I install them with PE Recovery. My ROM is encripted.

If you you want to decript the ROM you can try a DMverify but I don't know if it's ok on this ROM
 

OvaisAlam

Senior Member
Sep 22, 2010
75
6
Somewhere in Amazon
After resetting/removing everything, I am finally be able to install this ROM.
Thanks @Pezzo76 for your help/replies :)

Is there any easy way/method to install Magisk on this ROM? Followed the official method but I am unable to find the recovery.img file in the ROM (my device doesn't have Ramdisk).
 
  • Like
Reactions: Pezzo76

Top Liked Posts

  • There are no posts matching your filters.
  • 21
    1615785682437.png


    PixelExperience for Xiaomi Redmi Note 8/8T

    What is this?
    Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)

    Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device

    Based on Android 11



    Whats working?
    Wifi
    RIL
    Mobile data
    GPS
    Camera
    Camcorder
    Bluetooth/Audio
    Fingerprint reader
    Sound / vibration
    DT2W


    Known issues
    You tell.

    How to flash
    Flash Latest Ten firmware
    Wipe system
    Wipe Vendor
    Format Data
    Flash ROM
    Reboot

    Telegram Group
    Link


    DON'T FLASH GAPPS, ALREADY INCLUDED
    Link


    Translation
    Help with project translation

    Stay tuned
    Our Telegram channel
    Our blog






    XDA:DevDB Information
    pixel-experience, ROM for the Xiaomi Redmi Note 8/8T

    Contributors
    iamsaalim
    Source Code: https://github.com/PixelExperience-Devices/device_xiaomi_ginkgo

    ROM OS Version: Android 11
    ROM Kernel: Linux 4.x
    ROM Firmware Required: Ten firmware.
    Based On: AOSP

    Version Information
    Status:
    Stable
    Beta Release Date: 2021-03-13

    Created 2021-03-15
    Last Updated 2021-03-15
    6
    Thank you all who gave their valuable input in my quest to troubleshoot my issues. After immense trial and error with tons of google searches, I was finally able to frankenstien enough knowledge to create one final solution. As a sign of my respect for this community, I'll pen my experience down in hopes it saves the trouble for someone else down the line.

    Foremost, the installation guide linked was easy to understand and the ROM itself is light and extremely responsive. Apart from some minor hiccups here and there, this is a good Pixel Experience. Thank you iamsaalim!

    That being said, if you're an unfortunate person like me who lives in India and a victim of Xiomi's "yea I'll think about you last" attitude, there are a few things that the guide does not cover at the time of writing this post. Not the maintainers fault tbh, it's just bad luck. Here are the steps that I followed:

    • Grabbed both the ROM and Recovery from the link in the original post.
    • Followed the guide to the letter up until the point where I flashed the recovery in via adb.
    • Encountered recovery issue where the phone would just freeze trying to go into recovery via Vol+ and Power buttom. Tried "fastboot erase userdata" command. Freezing issue gone but instead of TWRP, MI Recovery showed up. After much trial and error and thanks to yn4v4s's input(you rock dude), I finally realized I'm on Q firmware which is Android 10 whereas the TWRP in the original post is meant for R firmware which is Android 11. Decided to grab the yn4v4s's recommended Global version.
    • Went to TWRP website and grabbed December 2020 recovery and flashed that via adb. Success as TWRP flares to life.
    • Continued on with the guide all excited thinking the worse is behind me as all I need is to install ROM, right? WRONG.
    • Immediately new problem: Factory Reset/Formatting failure/Wiping Failed. reason? Operation not Permitted
    • Selected Mount and spotted a weird anomaly. Cycling through the storage, noticed Internal storage was marked as (0) capacity. Immediately stuck that as odd. Google search intensified.
    • Went to Wipe> Selecting /data > Advance Wipe > Change file system, I saw that the file system was FTFS by default. Changed it to ext4 and formatted it. Now ftfs is supposed to be better but I noticed all other drive partitions were in ext4 format, so for the sake of simplicity I stuck with ext4 instead of reverting to ftfs.
    • Tried Factory resetting again. This time new error while formatting: Invalid Argument. Proceeded to chuck neighbor's cat out of the window and fight imaginary sharks to vent frustration.
    • Calmed down and went back a few steps. Realized, forgot to clear cache. Went back into Advance wipe and cleared Davlik /ART Cache, Cache, Data, System and Vendor.
    • Proceeded to format once again typing "yes" while praying. Finally, success!!
    • Time to flash and upgrade to Android 11 firmware first before the ROM. Placed the global firmware into the SD card via USB cable. Saw folks flashing ROMs from TWRP as well so placed PE ROM too.
    • Selected Install on TWRP and navigated to the firmware file. Executed the firmware and noticed it installing within seconds. A bit worrying sign but since no errors were thrown I continued on.
    • Navigated to the directory again, selected PE ROM image this time and installed it as well. Installation went without any incidents and returned with a success message. Okay...
    • Moment of Truth. Reboot! 1 minute passes, Google Icon spins up. YES! 2 minute passes, Google bar starts running. Encouraging! 3 minute passes, bar continues running. Erm. 4 minute passes, bar still. Uh oh.
    • Yeap, no cigar yet. I'm now stuck in a boot loop. To make matter worse, TWRP recovery gets overwritten by PE Recovery. Sigh.
    • Decide to grab the latest TWRP from their website and flash that instead since there is no point in using old Android 10 TWRP.
    • Aaand I'm frozen again on REDMI screen. WTF?! I flashed Android 11 global firmware so I'm pretty sure I'm on the new one. Flashed old TWRP again and sure enough I'm into the recovery. Confused as hell now. For the heck of it, I erased Cache again.
    • Noticed an odd new console error in red. Unable to decrypt FBE device
    • More google searches later, I come across discussion where community came to the conclusion that "console output Unable to decrypt FBE device was nothing but to tell us that incompatible operating system flashed"
    • OS can't be an issue, it's made for my Redmi Note 8 and I'm plenty sure I'm on ginkgo.
    • Going through this thread I noticed how folks swore by Chinese firmware. Decided to deviate and flash that firmware instead. Wiped everything again including the OS.
    • Went back to following the guide and decided to sideload selecting Advanced on TWRP and select "Side Load" option. Copied the ROM in my ADB directory on the PC and used the "sideload 'ROM NAME'.zip" command.
    • Waited patiently for the message: If the process succeeds the output will stop at 47% and report adb: failed to read command: Success/No error.
    • Process ends but no such message. Instead I get: Total xfer: 1.00x
    • Quick google search showed that this is an error message. Too tired to get angry or brainy at this point so I simply reboot for the heck of it.
    • 1 minute into boot and suddenly I see white light. COULD IT BE...?
    • Sure enough, Google bursts out of boot into first time setup. YAY?!!
    Apologies, if this became a weird wall of text but this is a sum total of my experience in the last couple of weeks. I've no idea if I have done this right or I just got lucky eventually but it somehow worked for me. From installing adb, to fighting with drivers to recognize my phone, to waiting 7 days for bootloader to open, to finally all that I listed above, it was truly a nightmarish experience. But in the end, it was worth it. The default camera was a bit of a letdown but thankfully GCam apk uploaded in this thread by another member was easy enough to install and runs without issues. Unable to move the clock on the wallpaper became a bit of an irritant but nothing Nova Launcher couldn't fix.

    All in all, apart from the installation pangs, I'm loving it. Thank you all for your advice. Truly would have been lost without your inputs.
    5
    Yes sir, same for me yesterday with Willow. I thought it was caused by flashing DFE after flashing ROM, but so probably it's not the case. I solved flashing the latest stable fastboot MIUI rom from XiaomiAdbFastboot Tools, than flashing OrangeFox, wipe system etc., format data and than flashing the ROM zip. I also enabled the OTA updater settings in OrangeFox (I don't think it serves any purpose, but I'm writing it anyway).

    EDIT: I tried to go to recovery and I got stuck again......so don't try to open it again... @iamsaalim

    EDIT2 - installing Pitch Black Recovery (as said in previous posts) allows to open recovery but it got stuck on bootanimation if I reboot into system
    1. Flash vbmeta.img and recovery.img using adb fastboot
    2. Boot into recovery mode and connect ur phone to the computer using usb cable
    3. Copy the recovery file, ROM, latest 10 fw
    4. (In the recovery mode) flash recovery file
    5. Flash 10 fw
    6. Wipe cache/dalvik, data, vendor, internal storage, system
    7. Format data
    8. Install ROM
    9. Boot to system
    If u using the latest version of PE+ or PE I suggest using pitch black recovery
    4
    Weird, I was told I had to do at least two months of unoffical stable releases after producing five months of code that worked perfectly for every version and here you are without a proper working camera and you still got official?


    No wonder this ROM only gets maintained a month at a time.
    Camera works very fine for everyone, it's a issue from his side and don't worry I don't plan on dropping maintainership this early
    3
    The stock camera included in this PE (Android 11) rom does not open on my Redmi Note 8.

    Needed to flash the attached Gcam Uninstall zip via TWRP to remove the stock camera i.e. which is system app and thus cannot be uninstalled normally.

    Found the attached GCam 8.1 apk to install on my Note 8. This GCam 8.1 works perfectly.