[ROM][OFFICIAL][gta4xlwifi][10] LineageOS 17.1 for Galaxy Tab S6 Lite (Wi-Fi)

[Linux4]

LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.

LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

Instructions:

• Follow the instructions on the wiki https://wiki.lineageos.org/devices/gta4xlwifi

Note: You may use Odin instead of Heimdall, for this you will need to rename the recovery image to recovery.img and pack it into a tar archive.

Downloads:

• Builds: https://download.lineageos.org/gta4xlwifi
• GApps: https://wiki.lineageos.org/gapps.html

Reporting Bugs

• DO NOT Report bugs if you're running a custom kernel or you installed Xposed
• Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
• If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
• If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log

Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.

What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
 
Did you--
wipe:
 restore with titanium backup:
reboot after having the issue:
 
Are you using--
a task killer:
a non-stock kernel:
other modifications:
 
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:

Contributors
Linux4
Source Code: https://github.com/LineageOS

 

[Linux4]

reserved

 

[Linux4]

reserved

 

[Iceman66]

Congrats @Linux4 , you're "official" Lineage maintainer for GT4XLWIFI now.

 

[Michael Ion]

any plans the lte edition, it really is sad people dont make anything for this version I don't actually care for the lte I just happened to have bought it second hand. EDIT: nevermind just saw the actual version

 

[Beneter]

Works great for me!
For anyone interested: Netflix and Nanolx microG patcher do not work out-of-the-box.

Edit: Netflix does work after using MagiskHide Props and selecting the Galaxy Tab S5e Fingerprint, clearing the Playstore Cache and activating Magisk Hide for Netflix.

 

[SvenHee]

Well done, switching asap!

Edit: can this version be dirty flashed over the unofficial one?

 

[Linux4]

Well done, switching asap!

Edit: can this version be dirty flashed over the unofficial one?

No, I'm sorry, you can't dirty flash official over unofficial, there are two reasons for this:
1. It's signed with other keys (lineage ones)
2. It has FBE enabled like my unofficial 18.1 has, while unoffcial 17.1 had FBE disabled

 

[SvenHee]

Ok, thanks for the quick reply. Will clean flash

 

[bose301s]

OK, I have followed the directions on the LineagOS Wiki, got the bootloader unlocked, went into the system again, got onto the WiFi, verified that Allow OEM Unlock was greyed out in the on position. I then flashed the LineageOS Recovery in ODIN and booted into it, then did a Factory Reset/Wipe Data and then used adb sideload to install the latest nightly and ARM64 Stock OpenGAPPs and then reboot, I am then stuck on the boot screen for LineageOS. Any ideas on what I need to do?

 

[mu1989]

OK, I have followed the directions on the LineagOS Wiki, got the bootloader unlocked, went into the system again, got onto the WiFi, verified that Allow OEM Unlock was greyed out in the on position. I then flashed the LineageOS Recovery in ODIN and booted into it, then did a Factory Reset/Wipe Data and then used adb sideload to install the latest nightly and ARM64 Stock OpenGAPPs and then reboot, I am then stuck on the boot screen for LineageOS. Any ideas on what I need to do?

Have you taken the correct gapps version, for Android 10???
First lineage flashing, then rebooting and then gapps flashing, the first time

 

[bose301s]

Have you taken the correct gapps version, for Android 10???
First lineage flashing, then rebooting and then gapps flashing, the first time

I tried the slightly smaller step down GAPPS and it worked fine, must be something with that package or something.

 

[dgo65]

Thank you Linux4. I love LineagOS.
I have an Installation generic Problem for this device.

SM-P610 flash --> Only official released binaries are allowed to be flashed(RECOVERY)

Hello, I cannot install TWRP either LineagOS on my new GALAXY TAB S6 Lite WIFI Here is my example with TWRP (same with LineagOS) Device Info : download mode: Product Name SM-P610 (SAMSUNG TAB S6 LITE) Current Binary : Samsung Official...

forum.xda-developers.com

I you have any Idea...Perhaps you already had this...
Thank you for your job.
Best Regards.

 

[SvenHee]

I tried installing the update 0601 yesterday and that went wrong, kept booting to twrp.

I did a factory reset an installed the same version again but it seems to be throwing all kinds of problems.
At first some but not all apps would not start.
I factory-reset again and installed agian.

Now apps do start but not all apps reinstalled from the google backup.
I now want to install autodesk sketchbook but I get a message to place an sd card, which in fact is present and can be read.

I just now looked at what is available in the internal storage but that seems litterally all to be mangled, even though the apps I could install all seem to work.
Not a single recognizable folder present.

Did I omit anything with wipe/factoryreset?

 

[Linux4]

I tried installing the update 0601 yesterday and that went wrong, kept booting to twrp.

I did a factory reset an installed the same version again but it seems to be throwing all kinds of problems.
At first some but not all apps would not start.
I factory-reset again and installed agian.

Now apps do start but not all apps reinstalled from the google backup.
I now want to install autodesk sketchbook but I get a message to place an sd card, which in fact is present and can be read.

I just now looked at what is available in the internal storage but that seems litterally all to be mangled, even though the apps I could install all seem to work.
Not a single recognizable folder present.

Did I omit anything with wipe/factoryreset?

Please just stick to lineage recovery,
I'm almost sure all of these are being caused by TWRP.
Probably the reboot to twrp thing was even caused by TWRP messing with FBE again ... Did it show "Android Rescue Party Trigger" maybe ?

 

[SvenHee]

Please just stick to lineage recovery,

Thanks for the quick reply!
Is this a general lineage twrp thing, or specific to the s6-L?

I had read the guide saying to install lineage recovery but not to only use it.
Will give it a go later today.

 

[Linux4]

Thanks for the quick reply!
Is this a general lineage twrp thing, or specific to the s6-L?

I had read the guide saying to install lineage recovery but not to only use it.
Will give it a go later today.

It should be a general problem on every device running a ROM with FBE enabled but decryption not working in TWRP
Actually you can use twrp as long as you don't touch /data (wipe and such things) but looks like OTAs through twrp don't work too..
Or did your gapps addon.d maybe not run after the OTA? That would effectively have gapps uninstalled and might cause a reboot to recovery too

 

[dgo65]

It should be a general problem on every device running a ROM with FBE enabled but decryption not working in TWRP
Actually you can use twrp as long as you don't touch /data (wipe and such things) but looks like OTAs through twrp don't work too..
Or did your gapps addon.d maybe not run after the OTA? That would effectively have gapps uninstalled and might cause a reboot to recovery too

I had the same problem with an installation with Heimdall. After that I have installed the version 1230 without problem

 

[dgo65]

Thank you Linux4. I love LineagOS.
I have an Installation generic Problem for this device.

SM-P610 flash --> Only official released binaries are allowed to be flashed(RECOVERY)

Hello, I cannot install TWRP either LineagOS on my new GALAXY TAB S6 Lite WIFI Here is my example with TWRP (same with LineagOS) Device Info : download mode: Product Name SM-P610 (SAMSUNG TAB S6 LITE) Current Binary : Samsung Official...

forum.xda-developers.com

I you have any Idea...Perhaps you already had this...
Thank you for your job.
Best Regards.

At the end I found the solution. After the "Preparing for installation" process I had to follow this procedure.

Fix Missing OEM Unlock Toggle on Samsung Galaxy Devices (Guide)

Follow this guide to fix missing OEM unlock toggle on Samsung Galaxy devices. Also know more about what Prenormal RMM (KG) State is and how it affects your device.

www.thecustomdroid.com

Before to follow with the installation.
Only if anybody as the same problem.

 

[bsokol]

Any ideas how to enable MIDI over USB in this ROM?