[ROM][OFFICIAL][hotdogb][13] LineageOS 20

Search This thread
By:
Advanced…
Eric_Lev

Eric_Lev

Senior Member
Jan 27, 2019
1,426
2,615
Angers
sourceforge.net
olanyama said:
is it possible to update by sideload? my phone is stuck in finalising package installation
Click to expand...
Click to collapse
Boot into LOS recovery
Select “Apply Update”, then “Apply from ADB” to begin sideload ... (alternative : apply from USB OTG)
Sideload the package using: adb sideload filename.zip.

If you want to reinstall any add-ons (i.e. MindTheGapps), click Advanced, then Reboot to Recovery, then when your device reboots, click Apply Update, then Apply from ADB, then adb sideload filename.zip those packages in sequence.

Once you have installed everything successfully, click the back arrow in the top left of the screen, then “Reboot system now”.
 
Last edited:
  • Like
Reactions: anton6230 and HueyT
mikefnz

mikefnz

Senior Member
Jan 30, 2008
821
242
Christchurch
OnePlus 7T
Xiaomi Mi Pad 5
Bluetooth microphone.
Anyone else having problems with some Bluetooth microphones?
My earphone microphone works but not the mic on my Nissan Leaf.
I have tested the Leaf with another phone & it is fine.
I have tried all the obvious and generally recommended tweaks.
Before I reset all the Bluetooth/wifi/mobile data settings or do a clean install, any other suggestions?
TIA
 
S

sam.28011997

Member
Oct 17, 2018
12
2
My experience after installing this on my OnePlus 7T Indian Version (HD1901)
The screen changes hues in every 20 seconds or so. Like going from slight orange to pure black. The brightness slider sometimes works, sometimes doesn't. Please tell me if both these issues gets fixed. I loved all other parts of the os, only this kept me from using it as a daily driver. Although there are some issues with bluetooth audio too.
 
NotMyActualName

NotMyActualName

New member
Jan 12, 2023
2
0
Slovenia
sam.28011997 said:
My experience after installing this on my OnePlus 7T Indian Version (HD1901)
The screen changes hues in every 20 seconds or so. Like going from slight orange to pure black. The brightness slider sometimes works, sometimes doesn't. Please tell me if both these issues gets fixed. I loved all other parts of the os, only this kept me from using it as a daily driver. Although there are some issues with bluetooth audio too.
Click to expand...
Click to collapse
I used to experience same issues first day after installation (I am from EU, but I believe I have chinese version, flashed with manufacturer's EU software and like a month ago replaced with LOS). Hue issue seems to have disappeared. Brightness issue shows up, workaround is to tap on the location on brightness slider instead of slide it, or vice versa, whatever works.

For me, this isn't a major issue.
 
R

RavengamerSpace

Member
Aug 21, 2016
13
1
Did someone get Widevine L1 certification ? I'm stuck on L3 even with ih8sn's patch.
Also, it looks like Snapchat doesn't work even I successfully pass SafetyNet. Should I try to root my device with Magisk and then hide it ?
 
mikefnz

mikefnz

Senior Member
Jan 30, 2008
821
242
Christchurch
OnePlus 7T
Xiaomi Mi Pad 5
RavengamerSpace said:
Did someone get Widevine L1 certification ? I'm stuck on L3 even with ih8sn's patch.
Also, it looks like Snapchat doesn't work even I successfully pass SafetyNet. Should I try to root my device with Magisk and then hide it ?
Click to expand...
Click to collapse
I don't know anything about Snapchat but quite a few apps require an unrooted phone, so probably worth trying.
 
  • Like
Reactions: sam.28011997
R

RavengamerSpace

Member
Aug 21, 2016
13
1
I have applied the ih8sn patch and found that my phone identify as a Oneplus 5T. Is it normal ? Can this be the reason why some app sush as Snapchat and GPay do not work properly ?
Screenshot_20230131-134548_DevCheck.png
 
k.stahanov73

k.stahanov73

Senior Member
Jan 1, 2019
125
5
OnePlus 7T
RavengamerSpace said:
I have applied the ih8sn patch and found that my phone identify as a Oneplus 5T. Is it normal ? Can this be the reason why some app sush as Snapchat and GPay do not work properly ?
View attachment 5824393
Click to expand...
Click to collapse
in my opinion, before applying this patch, it must be edited for your smartphone model. but how it's done - I don't know, sorry
 
  • Like
Reactions: dor_pauli and RavengamerSpace
C

choratiu

New member
Feb 19, 2009
3
0
Hello,

I am running Lineage OS 20 with Nikgapps on a OnePlus 7T and I am very pleased with the setup with one exception: Google Speech Services.

If I go to Settings - ... - Languages & input - .. - Text to speech, it crashes my Setting app.

Is this an LOS issue or a Nikgapps one? And can someone help me to fix it?

Best Regards,
Horatiu
 
F

freed_de

Senior Member
Jul 24, 2018
53
14
OnePlus 6T
OnePlus 7T
choratiu said:
Hello,

I am running Lineage OS 20 with Nikgapps on a OnePlus 7T and I am very pleased with the setup with one exception: Google Speech Services.

If I go to Settings - ... - Languages & input - .. - Text to speech, it crashes my Setting app.

Is this an LOS issue or a Nikgapps one? And can someone help me to fix it?

Best Regards,
Horatiu
Click to expand...
Click to collapse
Well, I use the recommended MindTheGapps and it works great here. So maybe your assumption is correct.
 
You must log in or register to reply here.

Similar threads

LuK1337
[ROM][OFFICIAL][hotdogb][11] LineageOS 18.1
Replies
756
Views
105K
T
thefanum
mauronofrio
[RECOVERY][3.4.0-2][hotdogb]Unofficial TWRP recovery for OnePlus 7T Unified (Tes)
Replies
1K
Views
228K
ccapy
ccapy
matt0301
[ROM][13] DerpFest [Tango]
Replies
985
Views
163K
crazix
crazix
anirudhgupta109
[ROM][10]Android Open Source Illusion Project[Hotdogb][Official]
Replies
637
Views
94K
sandeep_kumar
sandeep_kumar
parth7667
[ROM][13.0][OnePlus 7T][Official] Pixel Experience [AOSP]
Replies
633
Views
101K
OptimusOBrien
OptimusOBrien

Top Liked Posts

24 Hours 30 Days All time
  • There are no posts matching your filters.
  • 2
    Eric_Lev
    Eric_Lev
    Slappy123 said:
    Unfortunately, I cannot find any 18.1 release anymore since LineageOS's website has been updated. I tried Archive.org, but cannot find any 18.1 zip and recovery for hotdogb as well.
    If someone still have a release, let me know !
    Click to expand...
    Click to collapse

    Eric_Lev - Browse /OnePlus_7T_T-Mobile_Tools at SourceForge.net

    sourceforge.net sourceforge.net
    View
    1
    LuK1337
    LuK1337
    borisSweden said:
    So after I backed up everything, I decided to update to the lastest LOS version 19/20. But you kind of send the signals that people with unofficial builds can leave because of MicroG, magisk, spoofing. I must upgrade vendor before upgrading the Android version but this "tutorial" is lacking steps:

    Update firmware on hotdogb | LineageOS Wiki

    wiki.lineageos.org wiki.lineageos.org

    Compared to kebab that has a little more "lines" of text to read:

    Update firmware on kebab | LineageOS Wiki

    wiki.lineageos.org wiki.lineageos.org

    I enabled usb debug and reboot to recovery, I did the payload dump to get a extracted folder, I open cmd from said folder, I enable adb sideload, I enter fastboot in the phone, I copy paste the fastboot flash commands but I see no change, vendor security is still the same. what I saw was fastboot: unknown option -- slot=all


    So my suggestion is, remove the firmware update page as it doesn't work or mention that unofficial build should revert back to stock, update the OS and reinstall whatever ROM of choice. Yes I know that you ship firmware but for some reason, unofficial builds don't do that. There is not a single tutorial on YT about this issue because everyone install ROMS EOL and never gets stuck in this situation. The "creator" of this unofficial ROM is just a server, not a person to talk to.
    Click to expand...
    Click to collapse
    You aren't supposed to notice any difference after updating your FW. Also, `what I saw was fastboot: unknown option -- slot=all` usually happens when you're using very old fastboot.
    BTW, you can see in attachment that these instructions work fine ^^
    View
    1
    clo__pez
    clo__pez
    eliaslear said:
    i'm having the same issue with screen brightness while using fingerprint where it locks to full brightness. but i noticed, if you move the brightness slider slowly, about 3/4, the screen goes green and blurs the background which is what happens while reading fingerprint. moving it further right, it focuses back and goes bright again. seems to me it's activating fingerprint brightness mode but not releasing it. Interestingly, opening camera corrects brightness issue. not sure if this will help compiler, just wanted to add a little more detail to the issue.
    Click to expand...
    Click to collapse
    access9 said:
    Regarding the issue with the brightness: I found a setting under Settings > Display > LiveDisplay. Click on Display mode. Mine was on "automatic". After turning it off the brightness immediately went back to a normal level, I was able to adjust the brightness level without it reverting to 100%, and automatic brightness seems normal too.


    View attachment 5828759

    Just thought I'd share for anyone else that has this issue. Hope it helps.
    Click to expand...
    Click to collapse

    Aside from removing your fingerprints to solve the issue I found that changing the display mode in LiveDisplay to Outside and then back to Off or Automatic makes the brightness slider function normally again after a fingerprint unlock.

    Would be cool if someone, including myself, wrote a background service that listened to fingerprint unlocks. When the phone is unlocked or fingerprint is cancelled, do the steps above programmatically. At least until this is hopefully fixed at the OS level.
    View
    1
    O
    orangepowerpokes
    Today I got a new battery, replaced the broken back glass, and upgraded to LOS 20 from 18! It's like a brand new phone, so happy!! Thank you once again LuK1337 and the LOS team.
    View
    1
    xdabushrang3r
    xdabushrang3r
    orangepowerpokes said:
    Of coarse if the phone was bricked, off to iphone lol :)
    Click to expand...
    Click to collapse
    iPhone?!?!?!?! 😮
    Someone report @orangepowerpokes for using dirty, filthy language in the thread 🤣🤣
    View
  • 24
    LuK1337
    LuK1337
    2okPze5.png


    LineageOS is a free, community built, aftermarket firmware distribution of Android 13, which is designed to increase performance and reliability over stock Android for your device.

    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    Instructions :
    Downloads :
    GPL compliance :
    Reporting Bugs
    • DO NOT Report bugs if you're running a custom kernel or you installed Xposed
    • Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
    • If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
    • If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
    Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.

    Code: 
    What is your--
LineageOS version:
LineageOS Download url:
Gapps version:

Did you--
wipe:
restore with titanium backup:
reboot after having the issue:

Are you using--
a task killer:
a non-stock kernel:
other modifications:

Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
    View
    4
    A
    access9
    Regarding the issue with the brightness: I found a setting under Settings > Display > LiveDisplay. Click on Display mode. Mine was on "automatic". After turning it off the brightness immediately went back to a normal level, I was able to adjust the brightness level without it reverting to 100%, and automatic brightness seems normal too.


    Screenshot_20230205-131533_LineageOS Settings.png


    Just thought I'd share for anyone else that has this issue. Hope it helps.
    View
    4
    F
    freed_de
    If you want to keep your Magisk configuration when upgrading from 19.1 to 20, this is how it works:
    1. Download Lineage OS and extract the zip file
    2. Create a patched boot image:
      -> payload-dumper-go -p boot payload.bin
      -> copy boot.img to smartphone, open Magisk, select Magisk install > Select file and patch
      -> copy /sdcard/Downloads/magisk_patched-XXX.img to PC
    3. Follow the official upgrade instructions up to and including step 6 or 7. Do not do any (!) reboot for now!
    4. Select Advanced > Enable ADB
    5. adb reboot bootloader
    6. fastboot flash boot magisk_patched-XXX.img
    7. fastboot reboot
    HTH
    Freed
    View
    3
    xdabushrang3r
    xdabushrang3r
    xdabushrang3r said:
    Thanks @mikefnz & @LuK1337
    I tried going from 18 to 20 but it failed (not the fail that can be ignored).
    I think I'll flash 19 and then 20, rather than do a fresh install of 20.
    Click to expand...
    Click to collapse
    mikefnz said:
    I would just do a clean install to 20 but see if the boss has any expert advice
    Click to expand...
    Click to collapse
    Ok, I tried going directly from 18 to 20 again and it worked flawlessly!!
    I don't know why it failed the first time so I tried again, and it just worked. All my data intact, and on first boot, everything worked exactly as it did before I updated.
    View
    3
    Ahmad Rady
    Ahmad Rady
    lidde said:
    Does anyone have a problem with SafetyNet? For me it does not pass CTS profile match
    Click to expand...
    Click to collapse
    Check this reply, it works like a charm!
    View

New posts