[ROM][OFFICIAL][I003][obiwan] LineageOS 18.1

Search This thread

zeb.net

New member
Dec 26, 2011
2
0
Does anyone else have an issue casting to chromecast with this ROM? Netflix, YouTube, and other streaming apps suffer the same issue. I'm using LineageOS for microG 18.1 20220405 from https://download.lineage.microg.org/obiwan/

I am able to use partially use chromecast with YouTube Vanced only (downgraded to version 16.14.34 and using Vanced microG 0.2.24.220220) - everything works there except volume control

With every other streaming app, I am able to see the chromecast icon, and select a thing to cast to, but then it will never connect
 
Hello,

First let me start by saying thanks for all of the work you have done on this amazing ROM! I am not sure what you did, but the battery life is stellar (I think you downclocked the mid/small cores and disabled the big?), and everything I expect to work, just... works (TWRP, Flashlight, animations, etc), with a few minor exceptions.
These exceptions are kind of nitpicks, and might be specific to me, but I thought you should be aware of them nevertheless:
1. USB 3.0 on the side port is giving me a "Connection Status: 0x02 (Device failed enumeration)" on a fresh install, while USB 2.0 works just fine

2. The downclocked cores are a bit a problem when using the device for intensive workloads (I do some video rendering, 3d point cloud generation, and light gaming on the device), it would be nice to have the option to increase the clock speed back to stock (maybe by default when plugged in to a sufficient power source?)

3. KVM support would be amazing for WOA and Android VMs (for data-harvesting apps and the like)

4. (This one is really nitpicky) I noticed video comes in green for some reason when video stabilization is turned on in a variety of camera apps (such as: GCam and Opencamera), I cannot find the cause, and it isn't really important to me at all, but I noticed it was weird and thought I should mention it

Again amazing job on the ROM (far less issues then I have had with most of the others for this phone) and I hope you continue to do great work!
 
Last edited:
We're not touching any cpu clocks!
Well, uh, that might be a good thing or a bad thing. Let me check...
Edit:
I have attached screenshots verifying the core clocks.

I haven't even installed a kernel manager up to this point (I have never been able to completely lock the CPU to a specific frequency like this anyway, it always seems like the kernel takes it as more of a suggestion). I had only checked the performance and frequncies of the device with the app 'CPU Throttling Test' and noticed significantly lower numbers.
I don't know how I accomplished this, but I think I might leave it this way since my phone lasts about 4 times as long on a charge with my regular daily use
Thanks for letting me know this wasn't intended functionality though; I'll definitely let you know if I figure out what's going on with this!

BTW, is the USB 3.0 bug a me-specific issue as well, or have you seen it replicated? I am starting to consider a clean flash again

Edit 2: CPU clocks were fixed when I flashed the latest update (May 22, 2022)
 

Attachments

  • Screenshot_20220514-171140_CPU_Throttling_Test.png
    Screenshot_20220514-171140_CPU_Throttling_Test.png
    172.5 KB · Views: 45
  • Screenshot_20220514-165958_SmartPack-Kernel_Manager.png
    Screenshot_20220514-165958_SmartPack-Kernel_Manager.png
    169.6 KB · Views: 45
  • Screenshot_20220514-170006_SmartPack-Kernel_Manager.png
    Screenshot_20220514-170006_SmartPack-Kernel_Manager.png
    180.6 KB · Views: 42
  • Screenshot_20220514-165950_SmartPack-Kernel_Manager.png
    Screenshot_20220514-165950_SmartPack-Kernel_Manager.png
    165.2 KB · Views: 43
Last edited:
  • Like
Reactions: animegamer4422

Timmmmaaahh!

Senior Moderator
Staff member
Sep 11, 2012
5,757
1
14,153
Bruges
OnePlus One
OnePlus 6T
gestures in your phone working?
I don't own this device; just looking around :)
If you can't find out how to logcat, you probably shouldn't be flashing ROMs. But it's a free world; do as you please. On this forum it's just important to provide solid feedback in development sections. Saying "it doesn't work" is not constructive. It can still be valuable I guess, depending on how much work the dev is willing to invest into troubleshooting issues. It's a heck of a lot easier to them when logs are provided.
 
I don't own this device; just looking around :)

If you can't find out how to logcat, you probably shouldn't be flashing ROMs. But it's a free world; do as you please. On this forum it's just important to provide solid feedback in development sections. Saying "it doesn't work" is not constructive. It can still be valuable I guess, depending on how much work the dev is willing to invest into troubleshooting issues. It's a heck of a lot easier to them when logs are provided.
Yes
Sorry i should have provided the logs
 
  • Like
Reactions: Timmmmaaahh!

SpoonPants

New member
Jul 15, 2022
2
1
Hey @aleasto Thanks for all your hard work keeping my ROG3 running Lineage. Much appreciated.

I noticed one issue. When I make a phone call and hold the phone to my ear, the screen does not turn off. This leads to my cheek opening other apps and changing settings.

Is there a setting I can change to fix this? Or is this caused by something else?

Thanks
 
Hey @aleasto Thanks for all your hard work keeping my ROG3 running Lineage. Much appreciated.

I noticed one issue. When I make a phone call and hold the phone to my ear, the screen does not turn off. This leads to my cheek opening other apps and changing settings.

Is there a setting I can change to fix this? Or is this caused by something else?

Thanks
proximity sensor doesnt work in LOS
 
  • Like
Reactions: SpoonPants

Hentacler

Member
Feb 21, 2019
32
23
I am using this ROM on a daily basic, but... it is a shame that just two flaws turned it from perfect to barely usable:
- The proximity sensor doesn't work. I lost count of how many times I had my calls interrupted or toolbar buttons accidentally clicked during a call.
- Camera stabilization doesn't work and gives a green screen. At least, I found no camera app where it works.

To some degree, stabilization can be performed later using ffmpeg, but this is not the same.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 9
    2okPze5.png


    LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.

    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. LineageOS does still include various proprietary hardware-specific code.

    All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    Instructions :
    • Download the latest recovery image and rom zip
    • Boot to bootloader
    • fastboot flash recovery lineage-recovery.img
    • Boot to recovery
    • Format data
    • Sideload LineageOS zip
    • Optionally flash any addons:
      • Advanced > Reboot to recovery
      • Sideload the addons
    • Reboot
    See https://wiki.lineageos.org/devices/obiwan/install for more detailed instructions

    Downloads :
    Reporting Bugs
    • Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
    • If it is a random reboot, grab /sys/fs/pstore/* (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
    • If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
    Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved.

    Known Issues
    • Downgrading to an Android 10 based rom (stock included) might not work. To be safe backup persist.img to restore when downgrading.
    • Depending on your carrier, you may need to force a 4G/5G-only connection for VoLTE to register (from the *#*#4636#*#* menu for example)
    • (minor) Touchscreen may fail to initialize in Lineage Recovery
    How do i...
    • Change the screen refresh rate?
      • Settings > Display > Advanced > Minimum refresh rate
    Contributors
    luca020400
    aleasto
    OrdenKrieger
    The LineageOS Team

    Source Code: https://github.com/LineageOS

    ROM OS Version: Android 11
    4
    FIrst official build is out:
    3
    This is my first jump back into custom roms in about 2-3 years and I’ve never done an A/B device like this ROG 3 before.

    When I’m staring off by flashing the stock OEM rom to both slots, should I do that via the lineage recovery or via adb? If it’s adb how do I flash to separate slots a/b?

    Would updating my phone to the latest stock firmware normally and the sideloading that copypartition zip through the recovery also work? I’ve never used that copy partition zip before how does it know which partition to copy to the other? Does it copy the active to the inactive or vis versa?

    Thanks, everyone!
    You can follow the instructions of a similar device https://wiki.lineageos.org/devices/hotdog/install, obviously using my files instead.
    Use the side USB port.
    3
    Hello! I’m not at all trying to rush you or nag, I’m generally curious why the fingerprint is not working on this Rom? This seems to be an issue with a lot of phones. Any help is appreciated, thank you!
    Non standard interfaces
    Hi
    first to the dev..thanks for your efforts..
    secondly ..how is the battery life on the rom as I am thinking of switching over
    thirdly.. does the face unlock work? is the rom daily driver material?

    Thanks in advance
    No face unlock, we don't do fake biometrics yet
    3
    Seems to work perfectly! Thanks so much, again!

    On a completely different note, I was curious if activating something like the RGB light on the back is possible in something like Lineage and if it is, is it planned to be supported? Obviously, I understand it's not necessary or a main priority, but it would be neat to have eventually if it's possible.

    Thanks for your work and time.
    There's already an app that supports this. Check the Play Store.