ROM[OFFICIAL][instantnoodle][11.0]**crDroid**[V7.14]
- Thread starter firebird11
- Start date
Hello,
The new build (2021-07-17) is not working on my OnePlus8.
The only builds that work on my phone are March 8,26 and 27th.
I don't know why but newer won't work.
I put the Logcat output of boot sequence bellow (2021-07-17 version), if you have any ideas
One more question, I can't access the FactoryMode (not factory reset) to recalibrate my FingerPrint sensor (because my sensor is not working for the moment). Do you have an idea ?
Thank you very much for your help and for your work
The new build (2021-07-17) is not working on my OnePlus8.
The only builds that work on my phone are March 8,26 and 27th.
I don't know why but newer won't work.
I put the Logcat output of boot sequence bellow (2021-07-17 version), if you have any ideas
One more question, I can't access the FactoryMode (not factory reset) to recalibrate my FingerPrint sensor (because my sensor is not working for the moment). Do you have an idea ?
Thank you very much for your help and for your work
Thank you for this great ROM!
I have a small issue on 7.8 though. The alert slider doesn't work properly: the bottom position uses the setting from the top position (so it does silent -> vibrate -> silent).
EDIT: Nevermind, another restart fixed it.
EDIT: Nevermind, another restart fixed it.
Last edited:
@firebird11 , firmware with Magisk and MicroG installed has problems with software update. New version stuck in boot animation and then enters Qualcomm Crash screen.
I have tried reboot to plain new version, and to version with Magisk and MicroG installed from recovery. I have tried a few versions for upgrade. The same problem.
At that, LineageOS 4 MicroG installed manually boots fine without Wipe.
I have tried reboot to plain new version, and to version with Magisk and MicroG installed from recovery. I have tried a few versions for upgrade. The same problem.
At that, LineageOS 4 MicroG installed manually boots fine without Wipe.
new builds up !
sorry it took a while but i was on vacation
sorry it took a while but i was on vacation
No worries! Hope you had a great vacation. Thank you!new builds up !
sorry it took a while but i was on vacation
Latest 7.9 broke data for me on T-mobile. Just says no simnew builds up !
sorry it took a while but i was on vacation
Hello, i have a problem with occasional fingerprint flashbang that started to occur after i installed
"
Is there a way i can get rid of it? And if not how do i reset the ROM?
CrDroid 7.9
"
N3O No Nonsense Notch Overlay".
I have deleted and installed it a few times since it seemed to not work (it did work, i misunderstood what it does) and then i noticed that screen started to go to max brightness for a moment when waking phone (not every time).Is there a way i can get rid of it? And if not how do i reset the ROM?
CrDroid 7.9
What is the build date for the latest version? For me, today is 21 but the website says 20. Just want to confirm.
fixed in today's build
a little blob problem
I have the same issue. Original install for 7.4 worked flawlessly but after update to 7.9, it crashes on the boot animation and goes to Qualcomm crash dump screen. Factory reset was done after original install and after update install. Issue occurs both when updating through the built-in updater and when updating through the included ROMInstaller.bat. Installation was done after returning the device to completely stock on the newest Android 11 OxygenOS ROM, using the Oneplus MSM tools
If you need more info let me know
Last edited:
I have been using this ROM for a few days and I really like it. Love all the options, it's very stable and battery life is good too.
I've just found two small annoyances:
- Fingerprint sensor doesn't work properly (and keeps giving "dirty sensor" errors) when Night Light (the blue light filter option) is on. I kept getting issues with the fingerprint sensor and for some reason it's related to Night Light being on; if I turn it off the fingerprint sensor works great again.
- Auto-brightness doesn't seem to trigger the "high brightness" mode. I could be wrong on this, but on auto-brightness in OOS in direct sunlight it seems to go brighter than what would be max on the slider (without auto-brightness), but this "mode" doesn't seem to get activated in this ROM.
At any rate thank you for the fantastic ROM!
I've just found two small annoyances:
- Fingerprint sensor doesn't work properly (and keeps giving "dirty sensor" errors) when Night Light (the blue light filter option) is on. I kept getting issues with the fingerprint sensor and for some reason it's related to Night Light being on; if I turn it off the fingerprint sensor works great again.
- Auto-brightness doesn't seem to trigger the "high brightness" mode. I could be wrong on this, but on auto-brightness in OOS in direct sunlight it seems to go brighter than what would be max on the slider (without auto-brightness), but this "mode" doesn't seem to get activated in this ROM.
At any rate thank you for the fantastic ROM!
Unfortunately, this ROM has performed a "Crash Dump" regularly on me. It started occasionally with v7.7 and has gotten worse with v7.9. It is particularly bad when I go to sleep listening to some music, but the phone never wakes me up in the morning because it crashed.
Also the fingerprint sensor has never worked for me on either. The GPS worked fine on v7.7 but stopped working correctly on v7.9.
Both version were clean installed.
Also the fingerprint sensor has never worked for me on either. The GPS worked fine on v7.7 but stopped working correctly on v7.9.
Both version were clean installed.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
21
Code:*** Disclaimer I am not responsible for any damage you made to your device You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Flashing Instructions:
for first install:
- be on the latest firmware possible
- download the file named like this: crDroidAndroid-11.0-XXXXXXXX-instantnoodle-v7.X-gapps-install-files.zip
- unpack zip to desktop (or whereever you want)
- reboot to bootloader
- run ROMinstaller.bat
- follow instructions
- reboot to system
- if you want to install gapps:
- reboot back to recovery
- Apply update
- Apply from ADB
- from your computer: adb sideload (gapps package).zip , i recommend MindTheGapps, because with this package i could update without having to install Gapps again
- reboot to system
- download the file named like this: crDroidAndroid-11.0-XXXXXXXX-instantnoodle-v7.X.zip in the internal updater and update it
Sources:
ROM: https://github.com/crdroidandroid
Kernel: kernel url
Download:
ROM download
Changelog: Changelog
Known issues:
Tell Me
crDroid OnePlus 8 Telegram group
Visit official website @ crDroid.net
crDroid Community Telegram
Donate to help our team pay server costs
Contributors
firebird11
Source Code: https://github.com/crdroidandroid
Many Thanks to:
FizzyAps and thznutz87 for the install script
LuK1337 for his awesome work on op8
Version Information
Status: Testing766there's a new build up , DeviceSettings was causing a lot off trouble so i had to remove it.
alert slider works again6
