• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][OFFICIAL][instantnoodle][11] LineageOS 18.1

Search This thread

bruelltaube

Senior Member
Oct 10, 2015
51
47
Did you install micro-g? If not, how's your messaging working?
I'm not using micro-g. For messaging I use Signal and Threema (to reach most of my contacts outside of Whatsapp, which I refuse to use) and both apps make use of polling. I'm using Signal for standard text messages as well.
 

ld626

Senior Member
Feb 5, 2014
111
15
Florida
I'm not using micro-g. For messaging I use Signal and Threema (to reach most of my contacts outside of Whatsapp, which I refuse to use) and both apps make use of polling. I'm using Signal for standard text messages as well.
I was refering to text messages, sorry I should've mention that, I used LOS without google svcs and also Graphene OS and I had problem with text messages, sometimes it got delayed but I didn't use signal back then, I'll give it another try with signal, google is SO annoying and whatsapp along with FB are the worse apps you can have it on your phone.
 
Last edited:

shubham1998

New member
Sep 11, 2014
2
0
Great rom, very fast and great battery life.
I have been using it since the first official build and have dirty flashed the updates since then. But since the last week I have been facing issues with my fingerprint scanner. If I reboot the phone then it works perfectly but after sometime it stops working and the only way to get it working again is to reboot.
I clean flashed the previous build (May 22) to check if the problem was with the latest one but I am still facing the issue. Can someone please help me. Thanks!
Edit - I dont know if it is useful but when the fingerprint scanner stops working, the max screen brightness is reduced and I see a green tint on the screen.
 
Last edited:

nono77240

Senior Member
Mar 18, 2011
173
26
OnePlus 8
06/05 update installed with the updater done without any problem. Root even stayed. Everything working flawlessly and the battery is really good. Thanks
 

Zuub

New member
Jun 5, 2021
2
0
UAE
OnePlus 8
Great rom. Super smooth and awesome battery life.

But I have issues with volte not working even though the settings are visible and enabled (even sim status showing voice quality: LTE). Yet calls are switching over from LTE to H

Anyone have a fix for this?
 

Rootmaster906

Senior Member
Dec 2, 2020
300
12
Nexus 6
Samsung Galaxy Note 10
Still unknown. NikGapps work fine but break "hey google". Working with ultranoob one of the maintainers to get sorted out. I'll lyk asap. Use Nikgapps if you don't use your assistant hands free. Adb sideload name of package. Through Lineage recovery

i tried flashing nik gapps, and it said error, storage is full. i factory reset, then advanced wipe dalvik and data, flashed rom and gapps then got the error
 

mattie_49

Senior Member
Feb 4, 2010
3,012
938
Seymour Tn
OnePlus 9
OnePlus 9 Pro
i tried flashing nik gapps, and it said error, storage is full. i factory reset, then advanced wipe dalvik and data, flashed rom and gapps then got the error
I don't have device any longer but remember having to sideload rom. Reboot recovery wipe data, reboot recovery,then sideloading gapps after that process. Before you ever boot into system though.
 

nono77240

Senior Member
Mar 18, 2011
173
26
OnePlus 8
anyone else getting system has forced close... close or wait? it happend on this rom and pixel experience.
I didn't get any force close on both Rom. PE+ and LOS works perfectly for me.
Everytime I did an install, I'm going back to OOS with msm tool, then do the last OOS update, then oem unlock and follow the process. Never had any issue, except for the sbc dual Channel that doesn't work for me 😔
 

Rootmaster906

Senior Member
Dec 2, 2020
300
12
Nexus 6
Samsung Galaxy Note 10
I didn't get any force close on both Rom. PE+ and LOS works perfectly for me.
Everytime I did an install, I'm going back to OOS with msm tool, then do the last OOS update, then oem unlock and follow the process. Never had any issue, except for the sbc dual Channel that doesn't work for me 😔
Is there not a TWRP installer for this device that works?
 

Rootmaster906

Senior Member
Dec 2, 2020
300
12
Nexus 6
Samsung Galaxy Note 10
I don't have device any longer but remember having to sideload rom. Reboot recovery wipe data, reboot recovery,then sideloading gapps after that process. Before you ever boot into system though.
So...I wipe data after flashing ROM...reboot recovery, then flash Gapps...then reboot recovery and wipe again? Thanks
Stoked to have an official build! It installs & runs great, thanks to all who made this possible for OP8!
It's nice to know it will always be updated and maintained - I was on DOT OS and loved it with Hasty kernel but the thread appears dead so here I am.
Plz share your installation process... Seems like I'm getting conflicting posts. Thanks
 

mobile_sensei

Retired Recognized Developer
Jan 18, 2011
623
807
Washington DC
OnePlus 8
So...I wipe data after flashing ROM...reboot recovery, then flash Gapps...then reboot recovery and wipe again? Thanks

Plz share your installation process... Seems like I'm getting conflicting posts. Thanks

Download the ROM And Use Adb Sideload in recovery(check1st comment)

OR IF SIDELOAD DOES NOT WORK THEN DO THE FOLLOWING

Download payload dumper and extract its zip
Now connect your device to your PC via usb cable
Now do all these commands one by one (Click enter after every command):-
"fastboot flash recovery recovery.img"
"fastboot flash boot boot.img"
"fastboot flash dtbo dtbo.img"
"fastboot --disable-verity flash vbmeta vbmeta.img"
"fastboot --disable-verity flash vbmeta_system vbmeta_system.img"
"fastboot reboot fastboot"
"fastboot flash system system.img"
"fastboot flash product product.img"
"fastboot flash system_ext system_ext.img"
"fastboot flash odm odm.img"
"fastboot flash vendor vendor.img"
"fastboot reboot recovery"
Go to factory reset and click yes (If ur coming from another ROM)
Reboot to system
[First boot will take a few minutes! Have patience]
Clean Flash is always recommended!
 
  • Like
Reactions: Rootmaster906

Top Liked Posts

  • There are no posts matching your filters.
  • 19
    2okPze5.png


    LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.

    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    Instructions :
    Downloads :
    Reporting Bugs
    • DO NOT Report bugs if you're running a custom kernel or you installed Xposed
    • Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
    • If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
    • If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
    Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.

    Code:
    What is your--
    LineageOS version:
    LineageOS Download url:
    Gapps version:
    
    Did you--
    wipe:
    restore with titanium backup:
    reboot after having the issue:
    
    Are you using--
    a task killer:
    a non-stock kernel:
    other modifications:
    
    Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:



    Kernel source: https://github.com/LineageOS/android_kernel_oneplus_sm8250
    {Mod edit: Link to kernel source added on request of OP}

    Donate:
    2
    Search for payload dumper. Can be used in Windows as a standalone program, or making use of Python3 under Linux as well. Doing so, you will be able to extract the boot.img to be patched with Magisk. Very good explanations on howto, here on XDA.
    Either this or you flash it directly as a zip, which is what i did
    2
    I'm loving the official Lineage and all set up without issue.
    There are a few niggles I have that make me wanna stick with Oxygen OS for now (until OP fall behind on thier updates for the device.
    • No Face Unlock?
    • No working wide-angle camera?
    • Volume slider doesn't work?
    So... while I'll be back in the near future. How do I revert back to stock?
    1. Yes, No Face unlock
    2. It's working
    3. Volume sliders works perfectly
    1
    Copying bugs from the closed thread with some additions:


    1) Display is too light on minimal brightness, it's not comfortable to use in darkness. Also, it seems its too dark on maximum brightness, but I am not sure.

    2) Phone speaker too loud on minimal volume. Everybody in room can hear my interlocutor.

    3) Gravitation sensor work fine in apps like SatStat, but not in camera apps: OpenCamera and GCam. While making a photo, horizontal line in camera react to position change very, very slowly. It take about 15 seconds to display real horizon.

    4) Not sure its a software problem, but nevertheless: Acc daemon + AccA app cannot limit battery charging voltage. This feature is very usefull to prolong battery live.

    5) Phone setting to check Proximity settings before activation is not working, so, phone aims to go active in pocket. Proximity sensor itself is working (proved with SatStat app).

    6) May be related to (1). Light sensor shows illumination value about 2..6 times more that it should be (tested with SatStat on a few devices). Error multiplicator not so big in dark place and grows with illumination level.
    1
    1. I installed magisk by patching the boot.img which seems to work fine. With the OP6 i had to re-install magisk every time, when i updated LOS. Is this still necessary?
    2. I've set brightness to auto and it seems to be always much brighter, than OP6. Is there a possibility to make this less bright?
    3. How would i flash an update to vendor rom without reinstalling LOS?
    4. Is anybody using backup to nextcloud and ever tried a restore? Is it save to use?
    Ad 1: after every OTA and BEFORE rebooting simply install Magisk (via the app) to inactive slot. Then reboot and enjoy the update while still/again having root.

    Ad 4: I backup/restore contacts and calendar using Nextcloud without problems, but no nandroid if you were refering to this.

    Unfortunately no input to 2 & 3 from my side...