[ROM][OFFICIAL][instantnoodlep][11] LineageOS 18.1

Search This thread

Demati

Member
Apr 22, 2013
46
22
It depends on the app. I get notifications from Signal and anything else on F-Droid but not from most apps built for the play store. Push notifications don't work with Protonmail but the app itself works fine.
 

jsomby

Senior Member
@LuK1337 will this rom work with OnePlus 8 pro Indian variant? Also can you make a youtube video of this rom on OP

Also is it possible to use this Rom without gapps? I use protonmail and proton drive/dropbox, openmaps, fdroid, newpipe primarily

There is no google apps in any of LOS, you need to install them manually if you want them. You can use your phone just fine without google integration.
 
  • Like
Reactions: williamshockley

Spoogemonkey

Member
Jan 21, 2021
17
3
After installing LineageOS with MicroG, and then the Aurora Store app, the Aurora Store listed a Google Play Services update available. But Google Play Services isn't installed...

Will installing this update actually install Google Services? Is this a bug?
 

Attachments

  • Screenshot_20210414-042414_Aurora_Store.png
    Screenshot_20210414-042414_Aurora_Store.png
    121.6 KB · Views: 32
May 25, 2020
36
8
White Bear Lake
Luk, I am updating from the latest OnePlus stock rom as the instructions say to due. 11.0.5.5. The exact error message I am getting after it says sending boot Okay is remote failed no such partition partition b. Also, I did have your rom on 17.1 before with android 10 and after extracting the files with winrar I am not seeing what I need to make this work? Before I had like 15-20 files and now other than payload bin I have 3 others none of which are in the instructions to upgrade. Thx in advance for your help. Kevin
 

LuK1337

Recognized Developer
Jan 18, 2013
8,371
16,731
Samsung Galaxy S III I9300
Moto G 2014
Luk, I am updating from the latest OnePlus stock rom as the instructions say to due. 11.0.5.5. The exact error message I am getting after it says sending boot Okay is remote failed no such partition partition b. Also, I did have your rom on 17.1 before with android 10 and after extracting the files with winrar I am not seeing what I need to make this work? Before I had like 15-20 files and now other than payload bin I have 3 others none of which are in the instructions to upgrade. Thx in advance for your help. Kevin
Consider posting full command + output instead. Also, what upgrade instructions are you referring to...?
 
May 25, 2020
36
8
White Bear Lake
The full cmd I am doing is in the los wiki instructions fastboot flash recovery_recovery.img and the result is what I shared with you before. As for the instructions I am following they are in the wiki also. The official guide for upgrading the OnePlus 8 Pro. Hope this helps, Kevin
 

LuK1337

Recognized Developer
Jan 18, 2013
8,371
16,731
Samsung Galaxy S III I9300
Moto G 2014
The full cmd I am doing is in the los wiki instructions fastboot flash recovery_recovery.img and the result is what I shared with you before. As for the instructions I am following they are in the wiki also. The official guide for upgrading the OnePlus 8 Pro. Hope this helps, Kevin
Meh I give up. I don't feel like guessing based on limited info. Let me know once you're able to actually copy your cmd scrollback so that I can see what you actually did because I can clearly tell you that wiki does not tell you to do "fastboot flash recovery_recovery.img" anywhere.
 
May 25, 2020
36
8
White Bear Lake
I am sorry that you feel I am not giving you enough info to help me and might be following the wrong device model? I can assure you I am. 5. In the instructions wiki it says to flash recovery-recovery.img to your phone before proceeding and that is what I am trying to do. If you don't want to help me this is fine but please give me the exact cmd to get recovery on my device for the 8 pro though I am pretty sure I am already. Thx, Kevin
 

LuK1337

Recognized Developer
Jan 18, 2013
8,371
16,731
Samsung Galaxy S III I9300
Moto G 2014
I am sorry that you feel I am not giving you enough info to help me and might be following the wrong device model? I can assure you I am. 5. In the instructions wiki it says to flash recovery-recovery.img to your phone before proceeding and that is what I am trying to do. If you don't want to help me this is fine but please give me the exact cmd to get recovery on my device for the 8 pro though I am pretty sure I am already. Thx, Kevin
Dear sir, please take a look at the attached image.
 

Attachments

  • Screenshot from 2021-04-14 19-12-02-xda-edition.png
    Screenshot from 2021-04-14 19-12-02-xda-edition.png
    470.9 KB · Views: 82
May 25, 2020
36
8
White Bear Lake
Dear sir, please take a look at the attached image.
Hey Luk that worked first try and your right I was making/overthinking it more difficult than it needed to be. Now the hard part of flashing the rom to my phone. Like I said before when I extracted the nightly rom it only has 4 files in it and none are boot img rom img dtbo etc? How do I make this work without all those files? Last time I bother you. Thx again, Kevin
 

LuK1337

Recognized Developer
Jan 18, 2013
8,371
16,731
Samsung Galaxy S III I9300
Moto G 2014
Hey Luk that worked first try and your right I was making/overthinking it more difficult than it needed to be. Now the hard part of flashing the rom to my phone. Like I said before when I extracted the nightly rom it only has 4 files in it and none are boot img rom img dtbo etc? How do I make this work without all those files? Last time I bother you. Thx again, Kevin
please. stop. following. old. xda. posts. and. open. wiki. installation. guide.
 
  • Like
Reactions: nzzane
May 25, 2020
36
8
White Bear Lake
please. stop. following. old. xda. posts. and. open. wiki. installation. guide.
[email protected], I know your intentions are good and thanks for helping me figure out and solve the recovery part of this. However, your starting to bother me a little as I am not even reading xda posts and am and have always been on the install instructions wiki page of instantnoodlep. My question is very simple how to now flash the rom when I seem to be missing the files needed to successfully do this??? I can't be more clear than stated. Thx, Kevin. P.S. This will be my last message today.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 9
    Hey is this rom maintained by official Lineage OS team?
    Yeah, a team of one person - me.
    3
    I am sorry that you feel I am not giving you enough info to help me and might be following the wrong device model? I can assure you I am. 5. In the instructions wiki it says to flash recovery-recovery.img to your phone before proceeding and that is what I am trying to do. If you don't want to help me this is fine but please give me the exact cmd to get recovery on my device for the 8 pro though I am pretty sure I am already. Thx, Kevin
    Dear sir, please take a look at the attached image.
    1
    Hey is this rom maintained by official Lineage OS team?
    If it's official supported then you would think so. I bet my money on YES -team.
    1
    How did you get the safetynetcheck to pass? Also are you on LineageOS recovery or TWRP?
    LineageOS Recovery. The guide is on this post: https://forum.xda-developers.com/t/...odlep-11-lineageos-18-1.4192827/post-84630617

    I'm not sure if you could get it pass without doing that boot.img trickery but that's what i did and it works. Most likely you could just do direct patch (can't remember the option since i don't need to install it right now) and then just add the magisk module + do the thing on terminal ie. run redux, take root access with su command and launch props as the instructions say.
    1
    Not LOS related, answered in other LOS threads though
    Right, just a Magisk problem then.
    Installed alternate Safetynet check, and I see that I still pass.
    Thanks.
  • 9
    This is probably for my own reference more than anyone else but this is the process I followed (step by step) for successful safety net attestation, MindTheGapps (for those that want to get away from google), and Location services provider:
    1) Download Latest L18.1 build from Luk1337 (https://www.androidfilehost.com/?w=files&flid=320828)
    1a) Unzip the build to some folder-DON'T DELETE THE ZIP FILE (probably be good to rename that Zip file "LineageOS18.zip")
    2) Download ADB/platform tools on computer (https://www.xda-developers.com/install-adb-windows-macos-linux/)
    3) Start phone and make sure it is on the appropriate Android OS version (for this version of lineage it should be 11)
    3a) If you are not on the correct version of android you need to update through your standard (Stock Rom) to the latest version (for oneplus 8 pro OxygenOS you can just click through the update prompts in settings and then you should be updated to Android 11)
    4) Enable developer settings (read the article on how to install ADB-it shows you how to enable dev settings)
    4a) Allow USB debugging (again refer to the guide above)
    4b) Allow OEM unlock (
    )
    5) connect usb to phone/computer and ensure device is recognized by typing "adb devices" in the command prompt of the computer
    6) Type "adb reboot bootloader"
    6a) Verify that your computer recognizes your fastboot device-type "fastboot devices"
    6b) If your computer doesn't recognize then you need to manually select the driver for the android device in your device manager->universal serial bus device (https://visualgdb.com/KB/usbdebug-manual/) sorry if you run a mac
    7) Unlock the bootloader-type "fastboot oem unlock" (
    )

    **Probably should reboot here if you want just to be safe and make sure you didn't mess up the bootloader unlock process/android version update**

    8) In the bootloader, you need to flash the LOS recovery.img found in that unzipped folder from step 1a-make sure you have the path to the recovery.img file correct! (if you need to get back to bootloader cause you rebooted just fire up that powershell/command line, connect the phone, and type "adb reboot bootloader") type "fastboot boot 'some/folderpath/tofile/recovery.img'"
    9) From the recovery menu you use the volume buttons to navigate (and power button to select) Factory reset -> Format data/factory reset -> Format data
    10) Then navigate and select Advanced -> Enter fastboot
    11) TIME TO INSTALL THE ROM!! Remember that ZIP file you downloaded way back in step 1? You'll need to grab that zip file path and use it for this command-type "fastboot update 'some/folderpath/tofile/LineageOs18.zip'"

    ***The phone will reboot at this point automatically IF YOU DON'T WANT/NEED SAFETY ATTESTATION/MIND THE GAPPS/LOCATION SERVICES YOU CAN STOP HERE***

    12) Should you choose to continue you will have to go through the setup(I recommend skipping through all the setup stuff if you can) on the phone and make sure you have MindTheGapps downloaded (http://downloads.codefi.re/jdcteam/javelinanddart/gapps)
    13) On the phone reenable developer settings and USB debugging. open powershell, connect phone and type " adb reboot recovery"
    13) Once in recovery use your volume/power keys to navigate to Apply update->Apply from ADB (this activates ADB Sideload)
    14) Once in sideload mode simply type "adb sideload 'some/folderpath/tofile/MindTheGapps.zip'"
    15) Once mindthegapps is installed then you can back out of the adb update menu and select "Reboot System now"

    ***The phone will reboot at this point-IF YOU DON'T WANT SAFETY ATTESTATION/LOCATION SERVICES YOU CAN STOP HERE***

    16) For safety attestation (the ability to use google service framework required apps like Banking or Pokemon go) you can install Magisk (I am sure there are other ways but I did it this way). From your phone browser-download Magisk-v22.apk (https://github.com/topjohnwu/Magisk/releases) and install (you should be prompted if you want to install from unknown sources-just click yes and install)
    17) I will now just follow the installation guide from magisk (https://topjohnwu.github.io/Magisk/install.html)
    18) Connect phone and copy the boot image to your device. This is found in that unzipped folder from step 1a-the file is boot.img
    19) Press the Install button in the Magisk card
    20) Choose “Select and Patch a File” in method, and select the stock boot.img that you just copied
    21) The Magisk app will patch the image to [Internal Storage]/Download/magisk_patched_[random_strings].img
    22) Copy the patched image to your PC with ADB "adb pull /sdcard/Download/magisk_patched_[random_strings].img" (or you can just navigate to the file from your computer and place it somewhere you can find-you'll need to use this soon)
    23) Reboot to fastboot "adb reboot bootloader"
    24) Flash the patched boot.img file you copied to your computer "fastboot flash boot /path/to/magisk_patched.img"
    25) Reboot
    26) Open the magisk manager app that now has root access and click settings->enable magisk hide
    27) From your phone browser download the magisk module "Universal SafetyNet Fix" to force SafetyNet to use basic evaluation (https://github.com/kdrag0n/safetynet-fix)
    27a) In the magisk app go to modules (looks like a puzzle piece)->install from storage and select the Zip file you just downloaded (don't reboot just yet-simply use your back button at this point)
    27b) Add the magisk module "MagiskHide Props Config" from the Magisk repo (click the little magnifying glass)
    27c) Install some command line interface on the phone (I used Termux-https://termux.com/)
    28) Reboot ->open termux and follow the instructions from MagiskHide Props Config
    28a) in termux type "su" then "props"
    28b) edit the device fingerprint (1)->pick a certified fingerprint (f)->Oneplus(21)->Oneplus 8 pro europe IN2023 (40)->Android version 11 (2)->confirm (y) and then reboot
    29) Once your device restarts open the Magisk manager. There should be a button for "Check safetynet". Click it. You should see a "success" message

    ***At this point you have installed a custom rom with a minimal Gapps package, rooted your phone, and configured it to pass safetynet. This means you can now use all apps without restriction. I recommend installing Amazon App store, Aurora App store/Aurora services magisk module, and FDroid app store to get all the apps you need without providing a google account. IF YOU DON'T WANT LOCATION SERVICES YOU CAN STOP HERE***

    30) On your phone-download UnifiedNlp.apk from microg (https://microg.org/download.html). Do not install!
    31) In the magisk app module repository you can search and add the "App systemizer (terminal emulator)"
    31a) I also added the Magisk Module "Busybox for Android NDK" but I am not sure if this is required
    32) From Fdroid (or wherever) install (at a minimum) the MozillaNlpBackend, NominatimNlpBackend
    32a) you can optionally install SatStat (to check all your location data)
    33) In termux type "su" and then "systemize". Select "Systemize given APK (3)"
    34) If your browser default download location is the download folder then simply type /sdcard/download/unifiednlp.apk
    35) restart your phone
    36) Open the unifiednlp app and select "configure backends". You should see Mozilla locations service here. Check it
    37) Select "configure address lookup backends" and select "Nominatim"
    38) Select "self check" and Allow permission to access approximate location (I would suggest all the time but that is your choice).
    39) In phone settings->location make sure "use location" is on.
    40) Open sat stat (and give location permission). You should se a bunch of red and blue dots on a compass. You should now have location services. If you don't....sorry....
    9
    Hey is this rom maintained by official Lineage OS team?
    Yeah, a team of one person - me.
    8
    2okPze5.png


    LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.

    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    Instructions :
    Downloads :
    Reporting Bugs
    • DO NOT Report bugs if you're running a custom kernel or you installed Xposed
    • Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
    • If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
    • If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
    Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.

    Code:
    What is your--
    LineageOS version:
    LineageOS Download url:
    Gapps version:
    
    Did you--
    wipe:
    restore with titanium backup:
    reboot after having the issue:
    
    Are you using--
    a task killer:
    a non-stock kernel:
    other modifications:
    
    Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
    3
    I am on oos11 do i ned to go back to oos11 to flash this?
    You are on oos11 and you want to go back to oos 11??:cool:
    3
    I am sorry that you feel I am not giving you enough info to help me and might be following the wrong device model? I can assure you I am. 5. In the instructions wiki it says to flash recovery-recovery.img to your phone before proceeding and that is what I am trying to do. If you don't want to help me this is fine but please give me the exact cmd to get recovery on my device for the 8 pro though I am pretty sure I am already. Thx, Kevin
    Dear sir, please take a look at the attached image.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone