• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

ROM[OFFICIAL][kebab][11.0]**crDroid**[V7.12]

Search This thread

zelect0r

Senior Member
Feb 16, 2015
435
108
OnePlus 8T
After the new Update, the System Ui crashed and Wifi wont work. The most time the issue is gone, after 1-3 times reboots
But it comes again.
When i flash a custom kernel like radioactive kernel, all is fiine.
 
  • Like
Reactions: hd2002

dpryor88

Senior Member
Nov 4, 2015
1,213
409
San Pedro
Google Pixel 3a
Google Pixel 4
After the new Update, the System Ui crashed and Wifi wont work. The most time the issue is gone, after 1-3 times reboots
But it comes again.
When i flash a custom kernel like radioactive kernel, all is fiine.
I clean flashed the latest crdroid (7.11) yesterday and I haven't had any of the issues you've described. Haven't had ANY issues to be honest.
 
  • Like
Reactions: hightech316

ivineet09

New member
Sep 28, 2021
3
0
After the new Update, the System Ui crashed and Wifi wont work. The most time the issue is gone, after 1-3 times reboots
But it comes again.
When i flash a custom kernel like radioactive kernel, all is fiine.
I had this same issue, after clean installing/reinstalling, I rolled back to previous version for the time being.
 

Xda user11

Member
Dec 22, 2020
36
3
Hi. A few days ago I tested the hdmi capabilities of OnePlus 8t and I came across an issue - 60hz lock. As far as I am concerned - it happens on all phones except nubia redmagic, so it seems to be a software limitation. Does ur rom support 120hz hdmi output?
 

dpryor88

Senior Member
Nov 4, 2015
1,213
409
San Pedro
Google Pixel 3a
Google Pixel 4
Which Gapps is recommened, nik,open,etc. Also anyone get nanodroid micog to work ?
rather have microg but need the patched playstore to work for couple apps i purchased.
I know MindtheGapps works, because that's what I use when I run crdroid on this phone. Not sure about other gapps variants, but you're safe with MTGapps.
 
  • Like
Reactions: nujackk

dpryor88

Senior Member
Nov 4, 2015
1,213
409
San Pedro
Google Pixel 3a
Google Pixel 4
I actually just reread the OP and saw that's what's recommended. Somehow I read right over that first time thru.:oops:
Haha to be completely honest, I did the same thing on this exact thread when I first got my 8t and wanted to try some custom ROMs available at the time. For some reason, I kept skipping the gapps part in the install instructions. Maybe we are equally dyslexic or something :) haha jk.

But anyway, no worries man. That's what the community is for.

Try crdroid out yet or still looking into it?
 

nujackk

Senior Member
Jun 16, 2008
611
115
Kent
OnePlus 8T
OnePlus 9
Haha to be completely honest, I did the same thing on this exact thread when I first got my 8t and wanted to try some custom ROMs available at the time. For some reason, I kept skipping the gapps part in the install instructions. Maybe we are equally dyslexic or something :) haha jk.

But anyway, no worries man. That's what the community is for.

Try crdroid out yet or still looking into it?
No, actually I was about 2 mins from fishing it last night when I got a call... By time I got off that it was best for me to get some rest. Might give try tonight
 

enkidu70

Senior Member
Nov 9, 2012
263
86
for first install:
  • be on the latest firmware on both slots

I am new to 8T and have a new device on latest stock rom
Guess I have all all prerequisits, except firmware on both slots.

What do I have to do to install stock rom on both slots?

I guess to use TWRP and install stock image on both slots?
But I am not sure if this is all...

Tnx for your help.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 5
    1
    I am new to 8T and have a new device on latest stock rom
    Guess I have all all prerequisits, except firmware on both slots.

    What do I have to do to install stock rom on both slots?

    I guess to use TWRP and install stock image on both slots?
    But I am not sure if this is all...

    Tnx for your help.
    check this thread
    1
    I am new to 8T and have a new device on latest stock rom
    Guess I have all all prerequisits, except firmware on both slots.

    What do I have to do to install stock rom on both slots?

    I guess to use TWRP and install stock image on both slots?
    But I am not sure if this is all...

    Tnx for your help.

    Which variant do you have? If you have already updated the system firmware it should be on both slots.

    Instructions:
    https://lineageosroms.com/kebab/ - Lineage install instructions include an file to copy your firmware to the inactive slot.
    1
    Hi
    I've read the OP and it says recommended way of flashing is Via TWRP. I am coming from OOS 11. It then goes on to say flash by ROMInstaller in Fastboot the first time. Question, can I flash from TWRP coming from OOS?
    My way coming from oos was to install via TWRP.
    But you need also the twrp-installer in the same version like TWRP self.
    After format data and reboot to twrp you can flash crdroid, after this you have to flash the installer. Reboot to recovery and flash the stuff you need, like Gapps and magisk.
    1
    Anyone using microg with this? If so whats best way to install had problems getting nanodroid install ?
    I tried with MinMicroG standard. Worked fine, but no paid apps from play.

  • 36
    BE3pE0l.png


    Code:
    *** Disclaimer
    
    I am not responsible for any damage you made to your device
    
    You have been warned


    crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today


    Features:
    https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn

    flashing instructions:

    it's recommended to use TWRP for installing.
    • download crDroidAndroid-11.0-XXXXXXXX-kebab-v7.X.zip and gapps-package to internal storage
    • reboot to TWRP
    • flash ROM and TWRP
    • wipe Dalvik
    • reboot to recovery
    • flash gapps (and if you want Magisk)
    • wipe Dalvik
    • reboot system

    the other way:

    for first install:
    • be on the latest firmware on both slots
    • download the file named like this: crDroidAndroid-11.0-XXXXXXXX-kebab-v7.X-install-files.zip
    • unpack zip to desktop (or whereever you want)
    • reboot to bootloader
    • run ROMinstaller.bat
    • follow instructions
    • if you want to install gapps:
    • enter recovery
    • Apply update
    • Apply from ADB
    • from your computer: adb sideload (gapps package).zip , i recommend MindTheGapps, because with this package i could update without having to install Gapps again
    • factory reset
    • reboot to system
    to update:
    • download the file named like this: crDroidAndroid-11.0-XXXXXXXX-kebab-v7.X.zip in the internal updater and update it
    some large gapps packages will not install due to lack off space

    Sources:
    ROM: https://github.com/crdroidandroid
    Kernel: kernel url

    Download:
    ROM download
    Changelog: Changelog

    Known issues:

    Tell Me

    crDroid OnePlus 8 Telegram group
    Visit official website @ crDroid.net
    crDroid Community Telegram
    Donate to help our team pay server costs

    XDA:DevDB Information
    crdroidandroid, ROM for the OnePlus 8T

    Contributors

    firebird11
    Source Code: https://github.com/crdroidandroid
    Many Thanks to:
    FizzyAps and thznutz87 for the install script
    LuK1337 for his awesome work on op8



    Version Information
    Status:
    Stable
    10
    please give me credit for using my install script
    9
    new builds up!
    9
    new builds are up !
    sorry for not being very responsive , i have a busy normal life :)