[ROM][OFFICIAL][land] crDroid Android v3.8.6 [7.1.2][OMS][OTA]

[Nitz327]

Rebooting for what??

For your issue with high battery drain.

Sent from my Xiaomi Redmi 3S using XDA Labs

 

[ncar123]

For your issue with high battery drain.

K and I used the turn screen on without sensors all along and the battery is still draining

 

[Nitz327]

K and I used the turn screen on without sensors all along and the battery is still draining

If it's still draining then just disable ambient display all together. If that's not it try an app like Wakelock Detector, it'll tell you what's keeping your phone awake. Other than that, Google is also your friend.

Sent from my Xiaomi Redmi 3S using XDA Labs

 

[ncar123]

If it's still draining then just disable ambient display all together. If that's not it try an app like Wakelock Detector, it'll tell you what's keeping your phone awake. Other than that, Google is also your friend.

Thx

And I posted a question about that I can't access twrp when the device is off, it's only showing boot logo, do you have any advice?

 

[Nitz327]

Thx

And I posted a question about that I can't access twrp when the device is off, it's only showing boot logo, do you have any advice?

I just use the button combo to access it from off or a boot loop. Hold ALL 3 buttons, a few seconds after you see the MI logo let go of ONLY the power button and keep the 2 volume buttons pressed, then release when you see the TWRP splash screen. Or is that what's not working for you?

It takes a long time, could be 15 or 20 seconds, just keep holding them in that pattern.

Sent from my Xiaomi Redmi 3S using XDA Labs

 

[ncar123]

I just use the button combo to access it from off or a boot loop. Hold ALL 3 buttons, a few seconds after you see the MI logo let go of ONLY the power button and keep the 2 volume buttons pressed, then release when you see the TWRP splash screen. Or is that what's not working for you?

It takes a long time, could be 15 or 20 seconds, just keep holding them in that pattern.

WORKED!!
But I can't see any storage (I think because of the adoptable storage)
What do you do?
Install a custom twrp?

 

[Nitz327]

WORKED!!
But I can't see any storage (I think because of the adoptable storage)
What do you do?
Install a custom twrp?

Oh good! I'm glad it helped. lol noooo sorry, I've never messed around with adopted storage at all so I have no idea!

Sent from my Xiaomi Redmi 3S using XDA Labs

 

[immy28]

Charge amperage will vary based on battery level and temperature. Also try a different charger and cable combination.



Do you have Ambient Display enabled? Make sure it's disabled. And Pocket detection, I forget where that setting is, it might be in display.



Are you rooted? Or using the built in root? Install Kernel Adiutor and make sure core control is enabled with apply on boot. Zero heating issues here. You're running the stock kernel yea?

Root with magisk .
default kernel with this rom.
Also which setting change in kernal adiutor ?

 

[ncar123]

Why not add a list in settings to turn off auto start apps in boot??

 

[Nitz327]

Root with magisk .
default kernel with this rom.
Also which setting change in kernal adiutor ?

Weird, I didn't see anywhere that I was quoted :S. You mean for overheating? Make sure core control is enabled in the thermal section. And apply on boot. But I think it's already enabled by default with the stock kernel. If it is and you're still overheating I'm not sure, zero problems here.

Sent from my Xiaomi Redmi 3S using XDA Labs

 

[paulbapet]

I interested to use this rom, and first time to use custom rom. and I have few question:
1. is it necessary to flash firmware ? my previous rom is MIUI global 9.5.1.0
2.how to use magisk instead of build in root? should I flash magisk zip without full un-root first ?

 

[bajijus]

I interested to use this rom, and first time to use custom rom. and I have few question:
1. is it necessary to flash firmware ? my previous rom is MIUI global 9.5.1.0
2.how to use magisk instead of build in root? should I flash magisk zip without full un-root first ?

1. You're already using latest fimrware, no need to flash firmware again
2. If you already use build in root, full unroot first to avoid any error, then you can flash magisk zip
But you can also flash the zip right away after flashing rom ( i suggest after the first boot)

Sent from my land using XDA Labs

 

[william.johhn7!]

1. You're already using latest fimrware, no need to flash firmware again
2. If you already use build in root, full unroot first to avoid any error, then you can flash magisk zip
But you can also flash the zip right away after flashing rom ( i suggest after the first boot)

No need to fully unroot. Magisk will also work fine with pre-rooted ROMs

 

[immy28]

Can dev add square battery icon ?and other setting like oreo ?

 

[Alan0101]

New Build pushed.
* Merged latest security patches

Sir thanks for this awesome rom. It would be good if I could disable orange status bar when battery saver enabled

 

[linuxgurl]

Can anybody confirm if this is more stable than the official 7.1.2 LineageOS?

 

[AVinaSh_S]

Can anybody confirm if this is more stable than the official 7.1.2 LineageOS?

Yes .. it is much more stable and battery friendly than LOS 14.1 Official.
Also it has dark video fix included and the sources are up to date.

 

[linuxgurl]

Yes .. it is much more stable and battery friendly than LOS 14.1 Official.
Also it has dark video fix included and the sources are up to date.

Do you happen to know if the brightness is acting erratic like in the 8.1 crDroid?

 

[AVinaSh_S]

Do you happen to know if the brightness is acting erratic like in the 8.1 crDroid?

The auto-brightness sometimes is too low but I notice this once or twice here and there.

It is not very erroneous though and in crDroid 8.1 official and unofficial , I did not face much problem with this.
So not sure if you had an extremely bad experience with auto-brightness.

 

[NickDios-5]

friend of developer.
How can I make the wireless screen work?.
this function does not work for me, it enters a bug with wifi and never connects.