Development [ROM][OFFICIAL][lemonade][12L] LineageOS 19

Search This thread
2okPze5.png


LineageOS is a free, community built, aftermarket firmware distribution of Android 12, which is designed to increase performance and reliability over stock Android for your device.

LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for LineageOS is available in the LineageOS GitHub repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

Instructions:
Downloads:
Reporting Bugs:
  • DO NOT report bugs if you're running a custom kernel or you installed Xposed.
  • Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
  • If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
  • If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.

Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:

Did you--
wipe:
restore with titanium backup:
reboot after having the issue:

Are you using--
a task killer:
a non-stock kernel:
other modifications:

Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
 
Last edited:
This section is for updating LineageOS. You must have your device connected to your computer to do this.

To update to newer builds of LineageOS 19.1, follow these steps (assuming you're already on LineageOS 19.1 or updating from LineageOS 19.0):

  1. Reboot to recovery.
  2. Write down which slot you are currently on somewhere. You will need it in case the update does not boot correctly.
  3. Go to Apply Update > Apply from ADB, and use "adb sideload" to flash the newer build of LineageOS.
  4. If you installed Gapps or Magisk or any type of addon previously, go to Advanced > Reboot to recovery. Otherwise, select "Reboot system now".
  5. Go to Apply Update > Apply from ADB, and flash your modules the same way you flashed LineageOS.
  6. When you are done, select "Reboot system now".
If an update does not boot, follow these steps:
  1. Reboot to bootloader. This can be done with "adb reboot bootloader".
  2. From there, use "fastboot --set-active=<slot>", replacing <slot> with the slot you were on previously.
  3. Reboot to system. You can just select "START" with the volume buttons and confirm by pressing the Power button.
 
Last edited:

posar

Member
Feb 15, 2022
15
4
Does this have the issue on the T-Mobile model where it will show two sim slots, both empty? Or is that problem specific to OOS 12?

Thanks!
 

iaio72

Senior Member
Jul 16, 2009
1,741
927
Rome
Just a curiosity, in launcher settings, it does not put the Google feed, to the left of the display, it does not exist.
 

bleuthoot

Member
Jul 5, 2018
9
0
OnePlus 9
Out of curiosity, what is the reason you need to be on OxygenOS 11 for this to be installed? Has something changed internally that conflicts with installing this ROM?
 

P_1

Member
Aug 1, 2007
11
5
Out of curiosity, what is the reason you need to be on OxygenOS 11 for this to be installed? Has something changed internally that conflicts with installing this ROM?

Its based on the proprietary blobs from the latest OOS11 release.
This means that while its possible for it to be installed ontop of any other OOS release, there may exist bugs/incompatibility issues when you use something other than what the lineage build is based on.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 25
    2okPze5.png


    LineageOS is a free, community built, aftermarket firmware distribution of Android 12, which is designed to increase performance and reliability over stock Android for your device.

    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for LineageOS is available in the LineageOS GitHub repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    Instructions:
    Downloads:
    Reporting Bugs:
    • DO NOT report bugs if you're running a custom kernel or you installed Xposed.
    • Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
    • If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
    • If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
    Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.

    Code:
    What is your--
    LineageOS version:
    LineageOS Download url:
    Gapps version:
    
    Did you--
    wipe:
    restore with titanium backup:
    reboot after having the issue:
    
    Are you using--
    a task killer:
    a non-stock kernel:
    other modifications:
    
    Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
    7
    Yea, I did a clean wipe just like everyone else at initial install. My recommendation is to flash ROM, load to the OS like normal, then settings and factory reset. That way there is some data to erase

    I'm on day 3 now and still have had zero black screen of death!

    To clarify though, I had already updated to the latest weekly update and I still was having the BSOD
    The black screen of death has been fixed (or at least it should be). The OOS 13 kernel made it very easy to reproduce the issue.

    The fix will be included in the next update (December 11).
    6
    This section is for updating LineageOS. You must have your device connected to your computer to do this.

    To update to newer builds of LineageOS 19.1, follow these steps (assuming you're already on LineageOS 19.1 or updating from LineageOS 19.0):

    1. Reboot to recovery.
    2. Write down which slot you are currently on somewhere. You will need it in case the update does not boot correctly.
    3. Go to Apply Update > Apply from ADB, and use "adb sideload" to flash the newer build of LineageOS.
    4. If you installed Gapps or Magisk or any type of addon previously, go to Advanced > Reboot to recovery. Otherwise, select "Reboot system now".
    5. Go to Apply Update > Apply from ADB, and flash your modules the same way you flashed LineageOS.
    6. When you are done, select "Reboot system now".
    If an update does not boot, follow these steps:
    1. Reboot to bootloader. This can be done with "adb reboot bootloader".
    2. From there, use "fastboot --set-active=<slot>", replacing <slot> with the slot you were on previously.
    3. Reboot to system. You can just select "START" with the volume buttons and confirm by pressing the Power button.
    5
    Starting this month, all builds that I upload will require OOS 12 firmware to boot. You must follow the instructions here BEFORE you can even update to these builds:

    https://wiki.lineageos.org/devices/lemonade/fw_update
    Make sure you also update the engineering_cdt partition while you do this.

    After this, you must reboot into bootloader mode and flash the new recovery image, which I will also upload. From there, boot into recovery and flash the new build. If you had Gapps installed, reboot into recovery and flash them again.
    5
    Anyone who is having issues with the black screen bug, test out the images in this ZIP and report back.

    Includes this change: https://review.lineageos.org/c/LineageOS/android_kernel_oneplus_sm8350/+/334681