when i tried to update from first build of lineageos 19.1 to second build of lineageos 19.1, it says system update corrupted, and it need for clean flash, how to fix it?This section is for updating LineageOS. You must have your device connected to your computer to do this.
To update to newer builds of LineageOS 19.1, follow these steps (assuming you're already on LineageOS 19.1 or updating from LineageOS 19.0):
If an update does not boot, follow these steps:
Reboot to recovery.Write down which slot you are currently on somewhere. You will need it in case the update does not boot correctly.Go to Apply Update > Apply from ADB, and use "adb sideload" to flash the newer build of LineageOS.If you installed Gapps or Magisk or any type of addon previously, go to Advanced > Reboot to recovery. Otherwise, select "Reboot system now".Go to Apply Update > Apply from ADB, and flash your modules the same way you flashed LineageOS.When you are done, select "Reboot system now".
- Reboot to bootloader. This can be done with "adb reboot bootloader".
- From there, use "fastboot --set-active=<slot>", replacing <slot> with the slot you were on previously.
- Reboot to system. You can just select "START" with the volume buttons and confirm by pressing the Power button.
Factory resetwhen i tried to update from first build of lineageos 19.1 to second build of lineageos 19.1, it says system update corrupted, and it need for clean flash, how to fix it?
I was getting black screen yet heptic feedback for buttons. Came down to having to do multiple times in a few hours. Holding all 3 buttons to force reboot. I think it's system Ui as well. I tried making it work. Was great other than this issue. But quite the bugUnfortunately I am having more issues similar to the unresponsive back button on other parts of the screen. I can't tell if it's the screen or a UI freeze, but I think the latter. I really wanted this one to work. I'll try to hold on for the next weekly, but it's doubtful.
On one occasion so far I had this and had to reboot using the buttons.
I have a feeling this has to do with the feature that blocks screen wake-up when the phone is in a pocket. I have switched it off and have never experienced this bug again. You can find this setting at the bottom of the display settings.I was getting black screen yet heptic feedback for buttons. Came down to having to do multiple times in a few hours. Holding all 3 buttons to force reboot. I think it's system Ui as well. I tried making it work. Was great other than this issue. But quite the bug
You have to use the universal safetynet fix and magisk props conf. With that you pass all safetynet checks, but some banking apps will detect root anyway. There is a tool called island which makes those apps work with the help of an work environment. Your have to install the banking app, activate magisk hide for the app, clone it via island into the work environment and delete the original app from the private profile.I couldn't pass either. Thought I had it but no. Something in the build makes it mismatch cts. It will get better in time. Just thought with it being official it would be useable with magisk. That's not the case. In your case it's detecting the unlocked bootloader you needed unlocked to get where you are .
This seems to have fixed it, huge thanks. I'll give the magisk / island solution a try.I have a feeling this has to do with the feature that blocks screen wake-up when the phone is in a pocket. I have switched it off and have never experienced this bug again. You can find this setting at the bottom of the display settings.
This seems to have fixed it, huge thanks. I'll give the magisk / island solution a try.
So I can flash magisk in LOS recovery without having to load any patched boots? It's my first slot A/B phone, so this is new to me. I am to understand that I just flash magisk in LOS recovery, except for an update, I would flash it to the inactive slot, because that's what takes the update, correct?
Will get faster in time. Let's be glad it's working. Is def a slow process though. Make some coffee !OTA updates takes 1.5-2 hours to complete installation. Specially "finalizing package installation" process takes more than an hour itself. Is this normal or I am missing something?
I'm not complaining about the time as much as fearing something I did wrong or not. Right now I've enabled "prioritize update process" to see it works better or not. Will see the results in the next week OTA update.Will get faster in time. Let's be glad it's working. Is def a slow process though. Make some coffee !
Gapps too? Regardless, it's nice to know Magisk modules surviving OTA updates.Update ran through very smoothly, apart from the very long update procedure. For those who want to know: I can confirm that magisk and all modules are surviving the update without a reflash to be necessary.
Yes, GApps are working too.Gapps too? Regardless, it's nice to know Magisk modules surviving OTA updates.
Thanks. I just updated my phone through the default system updater. I can confirm that all my Magisk settings, mods, and their configs are retained (including Widevine L1) and there's no issue.
Yessir, I still have this issue and was beginning to wonder if I was the only one, thanks for confirmation.I can confirm the sometimes unresponsive back button. I thought it to be my fault at first.
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
The black screen of death has been fixed (or at least it should be). The OOS 13 kernel made it very easy to reproduce the issue.Yea, I did a clean wipe just like everyone else at initial install. My recommendation is to flash ROM, load to the OS like normal, then settings and factory reset. That way there is some data to erase
I'm on day 3 now and still have had zero black screen of death!
To clarify though, I had already updated to the latest weekly update and I still was having the BSOD