I would advice against upgrading (for now) until the 'binder' bug is fixed. Unless you want an unhappy friend.
Development [ROM][OFFICIAL][lemonade][13] LineageOS 20
- Thread starter andr01dfr3ak
- Start date
-
- Tags
- lineage 20 oneplus 9
This binder bug is in relation to Google Services - yes??
What if you do not have Google Services?
What about microg?
Thanks.
FYI about binder issue, another fix soon (?)
forum.xda-developers.com
[ROM][OFFICIAL][lemonadep][13] LineageOS 20
LineageOS is a free, community built, aftermarket firmware distribution of Android 13, which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project with extra...
forum.xda-developers.com
FYI about binder issue, another fix soon (?)
[ROM][OFFICIAL][lemonadep][13] LineageOS 20
LineageOS is a free, community built, aftermarket firmware distribution of Android 13, which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project with extra...
The bug persists ... Enclosed a logcat.
My setup : latest build + MindTheGapps + ih8sn ... (clean flash)
Hi. I installed the 20230208 build. Everything that I have tested is great. The gaming experience is better than the stock OOS 13. Aspahalt 9 runs at butter smooth 60 FPS with no frame drops, while on stock OOS 13, it would often drop to 50, even to 40 sometimes. However, I have noticed battery drain to be slighlty higher than on stock OOS 13.
Apart from that, I'm facing a weird issue with safety net. I have rooted with Magisk v25.2 with the usual way (patch boot.img; boot it from bootloader; then permanent root from Magisk app's direct install method). I have enabled Zygisk, and configured DenyList. I have installed Universal SafetyNet Fix. Now the issue is when I test from YASNAC (or other SafetyNet test app), it fails at first (Basic Integrity Pass; CTS Fail). Then if I wait for about 30 seconds, and test again, it passes. Then after some time like 30 minutes or later, I test again, and it fails, then passes after a couple of tries in about 30 seconds, and will keep passing. This just keeps happening. On my Playstore, it first showed Device Not Certified. But I cleared app data for Store. Ran the YASNAC test till it started passing, then ran Play Store, and it would now show certified. Any ideas about this weird behaviour of safetynet?
Apart from that, I'm facing a weird issue with safety net. I have rooted with Magisk v25.2 with the usual way (patch boot.img; boot it from bootloader; then permanent root from Magisk app's direct install method). I have enabled Zygisk, and configured DenyList. I have installed Universal SafetyNet Fix. Now the issue is when I test from YASNAC (or other SafetyNet test app), it fails at first (Basic Integrity Pass; CTS Fail). Then if I wait for about 30 seconds, and test again, it passes. Then after some time like 30 minutes or later, I test again, and it fails, then passes after a couple of tries in about 30 seconds, and will keep passing. This just keeps happening. On my Playstore, it first showed Device Not Certified. But I cleared app data for Store. Ran the YASNAC test till it started passing, then ran Play Store, and it would now show certified. Any ideas about this weird behaviour of safetynet?
It's a known issue for the past days. Follow that thread...
MAGISK MODULE ❯ Universal SafetyNet Fix 2.4.0
Universal SafetyNet Fix Magisk module Magisk module to work around Google's SafetyNet attestation. This module works around hardware attestation and recent updates to SafetyNet CTS profile checks. You must already be able to pass basic CTS...
forum.xda-developers.com
There is a program to revert back to 11 or 12 then you can update from there https://onepluscommunityserver.com/list/Unbrick_Tools/
Yesterday's build should have fixed the issue. If it has not, do send us a logcat.
Yesterday's build = build 0212 ? ... because build 0214 is for lemonadep not lemonade.
Please note that my previous post and the attached logcat were posted after testing the latest version (lineage-20.0-20230212-nightly-lemonade-signed.zip).
Enclosed two new logcats.
Have a nice day and thanks for taking a look.
PS : the bug also persists with lemonadep (build 0214) ... see this post.
Attachments
Last edited:
Please see for example this commit :
For more information, these commits :
Thanks for the info. But does it mean for us? In what situations do we face these issues?
For example :
- No profile picture in many Gapps (not all though)
- Google Play "manage" window is not open-able as long as no profile picture is present
- Some games load infinitely until GMS is restarted
- Some games just disconnect the connected google account but continue working
- ...
Workarounds: Force close Google Play services, reboot the device ...
This issue leads to many "FAILED BINDER TRANSACTION" and/or "transaction failed" in logcats.
The previous fixes must have corrected a lot of stuff but the bug persists and still needs to be fixed... to be definitively removed.
Note: the bug occurs on lemonade and lemonadep (please read the previous posts on this thread or on the thread dedicated to lemonadep).
@Eric_Lev Thanks for explaining. Yes, that's what I noticed too but didn't know it was known as binder bug. I thought it was related to Google servers, or maybe the Universal SafetyNet Fix module. Probabale that's why the SafetyNet fails when checked from YASNAC and then after 30 or so seconds, it passes.
Alternative : ih8sn
[ROM][OFFICIAL][hotdogb][12] LineageOS 19
LineageOS is a free, community built, aftermarket firmware distribution of Android 12, which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project with extra...
forum.xda-developers.com
For lemonade : https://sourceforge.net/projects/er...ry_-_No_Magisk/ih8sn-aarch64-OP9.zip/download
Similar threads
Top Liked Posts
-
1For those who can't wait next sunday build (it drived me crazy), I built the kernel with the DT2W fix :
Thanks a lot for @LuK1337 and everyone involved with this fix ! -
3
I am aware of this issue and am looking into it. I've just been busy with other things.
For now, just use single tap, since the kernel currently reports double tap as two single taps instead.3
About GCam, I use this one :
or
https://sourceforge.net/projects/eric-lev/files/GCam/OP9/
Or one of my previous post
[ROM][OFFICIAL][lemonade][13] LineageOS 20
LineageOS is a free, community built...
forum.xda-developers.com
2In progress ... Be patient !
Workaround : https://forum.xda-developers.com/t/rom-official-lemonade-13-lineageos-20.4536697/post-88176351
Edit about workaround : 4 days of uptime without the binder issue.1
This has been working for me too. So much better now that I don't have to constantly force close apps. Also appears to fix the camera black screen problem. Now to wait on the official re-release... -
12
LineageOS is a free, community built, aftermarket firmware distribution of Android 13, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS GitHub repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
Downloads:
GPL compliance:
Reporting Bugs:
- DO NOT report bugs if you're running a custom kernel or you installed Xposed.
- Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
- If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
- If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Code:What is your-- LineageOS version: LineageOS Download url: Gapps version: Did you-- wipe: restore with titanium backup: reboot after having the issue: Are you using-- a task killer: a non-stock kernel: other modifications: Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:12Both OP9 and OP9Pro builds have been temporarily halted because of the binder issue. Builds will resume once it is fixed.3
About GCam, I use this one :
or
https://sourceforge.net/projects/eric-lev/files/GCam/OP9/
Or one of my previous post
[ROM][OFFICIAL][lemonade][13] LineageOS 20
LineageOS is a free, community built...
forum.xda-developers.com
3
I am aware of this issue and am looking into it. I've just been busy with other things.
For now, just use single tap, since the kernel currently reports double tap as two single taps instead.3Installing LineageOS 20 via the official guide without any problem on my OnePlus 9 (LE2115) ... and everything works like a charm ... OP9/LOS20 is my daily driver !
My setup : latest build + MindTheGapps + ih8sn (to bypass Safetynet attestation without Magisk - see screenshots)
My GCam : https://www.celsoazevedo.com/files/android/google-camera/dev-hasli/f/dl11/
My config file : https://www.celsoazevedo.com/files/android/p/f/2023/01/Arcide-LMC8.4-OP9P-v7.1.xml
Source: https://t.me/op9_xmls/73
Tip: It is recommended to use Google Photos instead of the stock gallery.
Thanks @andr01dfr3ak !
New posts
-
-
-
Xperia Parts on Stock Rom 47.2.A.11.228
- Latest: tonsofquestions
