[ROM][OFFICIAL] LineageOS 17.1 [nightlies]

blipk99

Member
Mar 24, 2020
16
1
0
oh good call, i thumbs up this, i've also run into flash issues over USB3 on other devices.
The USB3 ports on my laptop seemed to only work the second time a command is sent, and this doesnt work well at all for partitions.
Even on the USB2 hub I have a lot of trouble in linux, I have to constantly change ports until commands start working.

More trouble with the lineage-17.1-20200424-recovery-lake.img file as well, did not want to boot at all, would just load up into the stock ROM (which I had to reflash after messing up the partition formatting) and the touch screen wont work until another reboot.
I got TWRP to boot though and managed to flash todays build.

Noticed something strange though, there's an app called "Prip" preinstalled? I looked it up and seems to be some carriers chat app, is this a mistake?
And unfortunately, moto cam is still not recording any audio in videos :(

---------- Post added at 08:21 AM ---------- Previous post was at 08:10 AM ----------

In regards to the moto cam, it says it's accessing the microphone, but I'm assuming the wrong one as there are 3 on the device, and other apps don't seem to have an issue.
It was working fine in the 16.0 build, perhaps the audio source mappings have changed around since?
@Jleeblanch

---------- Post added at 08:21 AM ---------- Previous post was at 08:21 AM ----------

In regards to the moto cam, it says it's accessing the microphone, but I'm assuming the wrong one as there are 3 on the device, and other apps don't seem to have an issue.
It was working fine in the 16.0 build, perhaps the audio source mappings have changed around since?
@Jleeblanch
 

mmelillo

New member
Apr 25, 2020
2
0
0
after flashing lineage recovery img, rebooting into recovery mode and sideload copy-partitions.zip i'm getting:
error: protocol fault (no status)

what should I do to proceed?
 

Jleeblanch

Senior Member
Feb 6, 2012
1,993
5,690
153
Colchester, VT
Thank you Andreas. I was already on this site: https://motostockrom.com/motorola-moto-g7-plus-xt1965-3 But it didn't look official and there had been too many downloads for the 10 rom hostet on Google drive already :D

EDIT: Worked with https://support.lenovo.com/id/en/solutions/ht102605! I'm on Android 10 stock QPWS30.61-21-3 now. First rescue however failed. Running it again from fastboot did the job.
Lenovo/Moto's LSMA tool is legit, but another place to download full official firmware zips (especially for those who use Linux only and don't have Windoze) is here: https://mirrors.lolinet.com/firmware/moto/lake/official/

I wouldn't trust any firmwares found on any sketchy click bait websites.

Very good job bro :good:

I would like to implement a gesture to capture the screen and have the option to use the gestures of android 10 in full screen.
Are you referring to 3 finger screenshot gesture?
Full screen stock Android 10 navigation gestures are present as well as the stock feature "Swipe for notifications" which are both found in -> Settings -> System -> Advanced -> Gestures

I've just installed the rom with Open GApps and Magisk on a fresh and new device and I'm very happy. Very good work @Jleeblanch! After the installation I updated (to lineage-17.1-20200423-nightly-lake-signed.zip) using the built-in updater. Magisk was kept, however TWRP had been overwritten. Though that is not a problem for me.
If you want to keep TWRP installed after updating via OTA, use the "TWRP A/B Retention Script" Magisk module. You can find it's instructions for use in the modules description.


That sounds really awesome that you found a way...
I am still suffering with WebView/Jelly & OTA.
In recent versions I suffered from issues that there was no reboot in the new slot and I did not know whether it was me or a kind of bug...
Unfortunately I'm not able to reproduce this issue, but I'd really like to get to the bottom of it as pretty much every other Lake user on the Lineage IRC channel is complaining about it.

Someone also opened an issue on this on Lineage's gitlab issues tracker. Seems it'll happen on one slot and not the other? So every other update Webview is present and working as expected and every other it's not. If you could provide logs on the slot this issue is present, I would greatly appreciate it (assuming you or someone else hasn't already).

More trouble with the lineage-17.1-20200424-recovery-lake.img file as well, did not want to boot at all, would just load up into the stock ROM (which I had to reflash after messing up the partition formatting) and the touch screen wont work until another reboot.
I got TWRP to boot though and managed to flash todays build.

Noticed something strange though, there's an app called "Prip" preinstalled? I looked it up and seems to be some carriers chat app, is this a mistake?

In regards to the moto cam, it says it's accessing the microphone, but I'm assuming the wrong one as there are 3 on the device, and other apps don't seem to have an issue.
It was working fine in the 16.0 build, perhaps the audio source mappings have changed around since?
Are you trying to fastboot boot lineage-recovery.img? Cuz that's what it sounds like [emoji848]. Lineage recovery won't boot in that manner (whereas TWRP does) and needs to be flashed to the boot partition in order to be used for the first time. Afterwards you can simply reboot to recovery and it'll boot into Lineage Recovery

Regarding the Prip app... This is strange, no such app should exist on Lineage. I haven't added any carrier specific apps at all, and GApps doesn't install anything like that. I'd like more info about this tho and where exactly is that app installed.

after flashing lineage recovery img, rebooting into recovery mode and sideload copy-partitions.zip i'm getting:
error: protocol fault (no status)

what should I do to proceed?
Try using a different USB port on your PC?
 

blipk99

Member
Mar 24, 2020
16
1
0
after flashing lineage recovery img, rebooting into recovery mode and sideload copy-partitions.zip i'm getting:
error: protocol fault (no status)

what should I do to proceed?
Try killing the ADB process and see whether it's running under admin or user account. Highly reccomend a USB2 port or hub as well.
I had trouble from the lineage recovery and it messed up my partitions a bit, there's another thread on how to flash the stock ROM, may need to do that first then try installing lineage from TWRP instead.
 

Adai0

Senior Member
Mar 8, 2010
75
19
0
Did you have problems with restoring the phone from google, adding the google account or with webview?
Such problems were really severe with first builds...
I did not restore with google. I restored with Titanium Backup. I had no problems adding Google Accounts or with WebView.

Only current issue: Gallery App does not show any data. Does anyone have this as well?

EDIT 2: It works after I've stopped and cleared com.android.providers.media and restarted the phone.
 
Last edited:

oscararm10

Member
Feb 8, 2020
9
0
0
Are you referring to 3 finger screenshot gesture?
Full screen stock Android 10 navigation gestures are present as well as the stock feature "Swipe for notifications" which are both found in -> Settings -> System -> Advanced -> Gestures

Yes, I mean the screenshot with three fingers, another thing that would be good is the activation of gestures but in full screen.
 

chincheta0815

Member
Apr 4, 2020
19
4
0
I recently found just by ocasion that there seems to be no option for disanling/enabling the update of the recovery image as implemented by this change link. Where should this option be found? Might there be a bug?
 

Jleeblanch

Senior Member
Feb 6, 2012
1,993
5,690
153
Colchester, VT
I recently found just by ocasion that there seems to be no option for disanling/enabling the update of the recovery image as implemented by this change link. Where should this option be found? Might there be a bug?
Iirc it's in Developer settings.
Latest update from 27.04.2020 is a problem for my Moto.
Phone boot only in revovery.
I'm back to LOS26.04.2020.
The same thing happened to me, it keeps loading on the logo, then it goes back to the recovery.
Ignore the 20200427 build. It may get pulled, it may not but there was some permission updates on Snap Camera which consisted of a few commits and we managed to only get the first one [emoji28]. The reason it's not booting is due to priv-app permissions for Snap. Next build will be fine and should also include the Webview fix as well [emoji106]
 

chincheta0815

Member
Apr 4, 2020
19
4
0
... Iirc it's in Developer settings. ...
That's where I looked, but it's not there.
Can you tell me between which menu items it should be found in the Developer Options? In the upper most section there is no such menu item...
Then I would look and send a screenshot of that section.
Since the build containing that commit it has never shown up there...
I just want to know if its me or maybe a kind of bug...
 

dr.haggis

Member
Jan 18, 2011
8
2
0
München
Dear Guys,

I still have some issues with OTA. When I install the latest build, it always says 12 April 2020 for version.
I attached a screenshot after rebooting and downloading Build20200429 again in the Android updater.

Everytime after the reboot due to the update, it still stucks with fastboot fallback and I have manually enter the fastboot command to flash the gpt.bin

fastboot getvar max-sparse-size &&
fastboot flash partition gpt.bin &&
fastboot reboot
to boot again

Any ideas?
Is it better to flash the OTA file with adb sideload?
My installed recovery is Lineage Recovery not TWRP.
Maybe I should backup my data and make a clean Lineage Installation by time.

PS: Format my SD Card as internal partition is generally not working with Lineage, right?

Thanks,
Andreas
 

Attachments

Adai0

Senior Member
Mar 8, 2010
75
19
0
That's where I looked, but it's not there.
Can you tell me between which menu items it should be found in the Developer Options? In the upper most section there is no such menu item...
Then I would look and send a screenshot of that section.
Since the build containing that commit it has never shown up there...
I just want to know if its me or maybe a kind of bug...
I can't find it either.

PS: Format my SD Card as internal partition is generally not working with Lineage, right?
That has always been a mess, afaik. My wife used a Honor 5X a while ago. Took me hours getting it to work. My mum has a Galaxy S5 where it is crappy as well. By a phone with enough internal storage.
 

chincheta0815

Member
Apr 4, 2020
19
4
0
I got an issue with push notifications via WhatsApp, Telegram or 3rd Party Mail Apps:
When the device is set to vibrate only in the Sound/Notification settings, they make the device vibrate only when it is unlogged and the display is not black.

I tried to turn of battery optimization -> did not help,
I re-installed the respective apps -> did not help.
Do not disturbe mode is set to off.

Is that an issue related to me, lineageos or to gapps?
Thanks in advance for any help.
 

jadephyre

Senior Member
Jan 30, 2008
1,589
388
113
Moers
Anyone else having problem with the audio filmning videos? It works with stock camera app, bit not when filmning with Instagram or Snapchat.
Turn off voice match in Google Assistant, it has never worked with custom ROMs and is interfering with audio recording in every other app.
 
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone