[ROM][OFFICIAL] LineageOS 17.1 weeklies for F(x)tec Pro1

[bgcngm]

LineageOS is a free, community built, aftermarket firmware distribution of Android 10 (Q), which is designed to increase performance and reliability over stock Android for your device.

LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.

GPL compliance:

​

• Device tree source code: LineageOS/android_device_fxtec_pro1
• Kernel source code: LineageOS/android_kernel_fxtec_msm8998

Working:

• Camera (and flashlight)
• WiFi
• NFC
• Bluetooth
• Telephony (Calls and Data), including VoLTE
• Audio (Record and Playback)
• Video Playback
• Sensors
• GPS
• Encryption (FBE)
• Built-in keyboard

Broken:

• WiFi calling (?)

Compatibility:

Compatible with all F(x)tec Pro1 variants.​

Builds are based off the F(x)tec's Android 9 firmware with proprietary blobs from 20200825231445 package.​

Downloads:

• Official download links

Notice:

• No custom kernels are supported in this thread. Only stock kernel and official builds will be supported. No bug reports if that's not the case.

Installation:

• Refer to the official Wiki (link bellow)

Credits & collaborations:

Special thanks to tdm and mccreary for early bringup. All LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!​

Device wiki:

• Official wiki link

 

[bgcngm]

The first official build is up.

 

[shubell]

There seems to be an IMS issue, not registered. Can anyone else confirtm that?

 

[bgcngm]

There seems to be an IMS issue, not registered.

That's being worked on at the moment. I can't test IMS myself, so I have to rely on someone else to test. :fingers-crossed:

 

[Bengelee]

Wrong Layout for QWERTZ

Hi,
the Build version 17 is just amazing. It works realy great an the Phone is a looooot smoother now with lineage on it.
The only issue that i discovered is that the German Keyboardlayout is shifted by one Key to the left that means an "G" is an "F" and so on.

I also noticed that in Version 17 you dont have the ability to Upgrade your Lineage Version as there is no Option in the System Settings

I hope somebody can help me with the Keyboard Layout.

Regards
Bengele

---------- Post added at 01:42 PM ---------- Previous post was at 01:36 PM ----------

There seems to be an IMS issue, not registered. Can anyone else confirtm that?

Can you tell me what App you used to check that? Maybe i can provide some help for Troubleshooting

 

[Bengelee]

I found out about the FinQuertyApp it solved my problem for the qwertz layout.

If you need some help for testing purpose just ask

 

[shubell]

Can you tell me what App you used to check that? Maybe i can provide some help for Troubleshooting

type *#*#4636#*#* in the phone app

Hi,
the Build version 17 is just amazing. It works realy great an the Phone is a looooot smoother now with lineage on it.

It is noticeably smoother compared to 16

 

[Bengelee]

There seems to be an IMS issue, not registered. Can anyone else confirtm that?

It seems that i cant trigger that error for me everything looks normal. The only diffrence that i noticed is that LTE/TDSCDMA as Networktype and Telekom Germany as a Provider

 

[bgcngm]

I found out about the FinQuertyApp it solved my problem for the qwertz layout.

If you need some help for testing purpose just ask

Can you explain your problem in more detail? We have an option to change keyboard layout.

 

[bgcngm]

The only issue that i discovered is that the German Keyboardlayout is shifted by one Key to the left that means an "G" is an "F" and so on.

Are you referring to the broken setting for keyboard layout? We fixed that already and next build will be good, unless you're referring to a different issue.

 

[Bengelee]

Are you referring to the broken setting for keyboard layout? We fixed that already and next build will be good, unless you're referring to a different issue.

I Updated today to lineage-17.1-20201116 but the issue still persist when i enable the German Keyboard Layout:

The red one are what i get when i type

 

[mccreary]

I Updated today to lineage-17.1-20201116 but the issue still persist when i enable the German Keyboard Layout:

The red one are what i get when i type

There are actually two different layers that affect the keyboard layout, and it seems like you're using FinQwerty over the top of the QWERTY kernel layout. I suggest you disable FinQwerty, and switch to the QWERTZ kernel layout.

To change the kernel layout, open the settings app (the one with the icon that looks like a gear) and navigate through 'system -> buttons -> additional buttons -> layout'. That should open a dialog with QWERTZ as one of the available settings.

Note that the location of this setting has changed since 16.0, and will likely move again to the 'languages & input' settings in the near future. Hopefully it will be happy there, and not move again!

 

[Bengelee]

There are actually two different layers that affect the keyboard layout, and it seems like you're using FinQwerty over the top of the QWERTY kernel layout. I suggest you disable FinQwerty, and switch to the QWERTZ kernel layout.

To change the kernel layout, open the settings app (the one with the icon that looks like a gear) and navigate through 'system -> buttons -> additional buttons -> layout'. That should open a dialog with QWERTZ as one of the available settings.

Note that the location of this setting has changed since 16.0, and will likely move again to the 'languages & input' settings in the near future. Hopefully it will be happy there, and not move again!

i uninstalled FinQwerty and selected the Kernel Layout German for the Keyboard. Then i rebooted.

I have still the same error with the shifting. But i had the right layout on the FinQwerty

Regards
Bengele

 

[bgcngm]

i uninstalled FinQwerty and selected the Kernel Layout German for the Keyboard. Then i rebooted.

It's not that option. Go to Settings / System / Buttons / Additional buttons. Then choose the proper keyboard layout.

 

[Bengelee]

i uninstalled FinQwerty and selected the Kernel Layout German for the Keyboard. Then i rebooted.

I have still the same error with the shifting. But i had the right layout on the FinQwerty

Regards
Bengele

I found the Option that you mentioned. Now it works without FinQwerty.
On the Stock Rom for the Pro 1 i also just changed the Physical Keyboard Layout as the picture shows above. Thats why im wondering why its so "complicated".

Anyway thank you so much for your help if i can support you with some testing feel free to contact me

 

[bgcngm]

Next weekly build will be big and among misc changes, it includes IMS fix. Thanks to @shubell for all the testing.

 

[Schuhabtret0r]

Hello,
i spend now many hours to root the Pro 1 with successful installed Lineage 17.1-20201214-nightly and i failed.
I sideloaded magisk v21.1 (successful) installed the Magisk manager apk v8.03
Manager shows:
Newest : N/A
Installed: N/A
Ramdisk: yes
A/B Yes
SAR Yes
Crypto File

I saw special boot.img, Stock Firmware to fix that but nothing worked.

Please someone can write a working How To ? Or add the lineage su addon for 17.1

I miss my Afwall+ ;-D

Thank You very much !

P.S. Whats up with these google usb drivers for pro 1 ?