[ROM][OFFICIAL][natrium][11] LineageOS 18.1

Search This thread

LuK1337

Recognized Developer
Jan 18, 2013
8,239
16,539
253
Samsung Galaxy S III I9300
Moto G 2014
2okPze5.png


LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.

LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

What's not working :
  • WFD
Instructions :
Downloads :
Reporting Bugs
  • DO NOT Report bugs if you're running a custom kernel or you installed Xposed
  • Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
  • If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
  • If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.

Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:

Did you--
wipe:
restore with titanium backup:
reboot after having the issue:

Are you using--
a task killer:
a non-stock kernel:
other modifications:

Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
 
Last edited:
  • Like
Reactions: deathbreath2010

vic97

Member
Jan 18, 2016
49
7
0
are there minimum firmware requirements that are required to flash this build? or will just flashing the latest global stable (currently on 10.2.4.0 firmware) suffice?

also, does twrp/lineage recovery currently support flashing android 11 based roms?
 
Last edited:

Lorenzopapi99

Senior Member
Jan 3, 2017
235
32
28
LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.

LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

What's not working :
WFD

Instructions :
Download the latest build and gapps
Reboot to recovery
Flash the latest build and gapps
Reboot

Downloads :
Builds :
https://www.androidfilehost.com/?w=files&flid=318015
http://downloads.codefi.re/jdcteam/luk/lineage-18_0/natrium
https://sourceforge.net/projects/luk-lineageos/files/natrium/lineage-18.0


Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log

Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.



XDA:DevDB Information
[ROM][UNOFFICIAL][natrium][11] LineageOS 18.0, ROM for the Xiaomi Mi 5s Plus

Contributors
LuK1337
Source Code:https://github.com/LineageOS

ROM OS Version: Windows 8 Mobile
Based On: LineageOS

Version Information
Status: Testing

Created 2020-09-28
Last Updated 2020-10-07
Thanks! :victory:

---------- Post added at 02:22 PM ---------- Previous post was at 02:20 PM ----------

Installation is smooth and didn't encounter any problem. Rom is smooth too but facing reboot occasionally.
How is the battery?
 

jngiag

Senior Member
Jul 19, 2009
199
82
48
Tried version 20201008. Installation smooth. Just wipe cache (Davlik, Cache, System, Data) and install rom and BiTGApps-arm64-11.0.0-R17_signed. Install magisk-v21.0 if required.

1) Working - Phone, SMS, Wifi, camera, IR, music, bluetooth media, dt2w
2) Not Working - Bluetooth call, NFC

Tested for about 9 hours. Occasional reboot (4-5 times) for the first hour after installation and less frequent after that (uaually reboot only after new installation). Viper4Android works using ViperFX_Android11.zip. Battery usage seem reasonable. No fast draining of battery is noticed (1 hour of standby about 2% drip). Charging - 25 min. about 30%.

Going to revert back to Android 10.
 

jngiag

Senior Member
Jul 19, 2009
199
82
48
Further update to the testing.

1) Working - Phone, SMS, Wifi, GPS, camera, IR, Cast, video, music, bluetooth media, d2tw.
2) Not Working - Bluetooth call, NFC, Android Auto
3) Battery - 12 hours standby - 13%; 65 min of games - 15%; 25 min of video - 7%

One day after installation, tried playing games (plants vs zombies 1) for 65 min followed by 25 min of video, surprise to note that there is no rebooting problem at all. The rom seem good and stable as Android 10 rom. Wish it would continue to be stable. :)
 
Last edited:

jngiag

Senior Member
Jul 19, 2009
199
82
48
No more reboot issue after one day. Seem like the rom needs one day to stabilise after installation. Bluetooth (call and media) actually works fine. My mistake previously for keeping the volume too low. Rom is smooth, stable and battery consumption is as good as my previous Android 10 rom.
 

Lorenzopapi99

Senior Member
Jan 3, 2017
235
32
28
No more reboot issue after one day. Seem like the rom needs one day to stabilise after installation. Bluetooth (call and media) actually works fine. My mistake previously for keeping the volume too low. Rom is smooth, stable and battery consumption is as good as my previous Android 10 rom.
NFC works?
 

jngiag

Senior Member
Jul 19, 2009
199
82
48
NFC works?

I don't use NFC. I guess this feature is not available yet as it is blank when this option is selected.

By the way, the reboot issue is not totally gone though happening less frequent.

I have also tested the treble version of Android 11 (by phh) on this phone. It boots successfully but has many bugs yet to be fixed. Lineage 18.0 is far ahead of it.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Fingerprint is still dead in the official build. If anyone who still owns this device wants to install LOS or upgrade, stick with version 17.1
    Try replacing /vendor/overlay/org.lineageos.platform-res__auto_generated_rro_vendor.apk with one I just attached.
    ( info for time travelers: don't do that on build newer than 20210401 as these changes are already included there )
  • 1
    2okPze5.png


    LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.

    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    What's not working :
    • WFD
    Instructions :
    Downloads :
    Reporting Bugs
    • DO NOT Report bugs if you're running a custom kernel or you installed Xposed
    • Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
    • If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
    • If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
    Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.

    Code:
    What is your--
    LineageOS version:
    LineageOS Download url:
    Gapps version:
    
    Did you--
    wipe:
    restore with titanium backup:
    reboot after having the issue:
    
    Are you using--
    a task killer:
    a non-stock kernel:
    other modifications:
    
    Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
    1
    fingerprint not working
    Same problem here
    1
    Fingerprint is still dead in the official build. If anyone who still owns this device wants to install LOS or upgrade, stick with version 17.1
    Try replacing /vendor/overlay/org.lineageos.platform-res__auto_generated_rro_vendor.apk with one I just attached.
    ( info for time travelers: don't do that on build newer than 20210401 as these changes are already included there )
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone