Development [ROM][Official][Nightly] LineageOS 18.1 for Edge S / Moto G100

[DkkCC]

edge S ≠ g100 ？

 

[Windoors]

Can't repro your location bug, met office weather app works just fine for me.

Hmm, I only tried the very first build. However, which build have you tested? Maybe it's been fixed? Also, have the press to unlock fingerprint and also three finger swipe screenshot been added? Thanks

 

[sp6ina]

I test this rom for fer day and i have only one problem. On sms app i can't send sms because i have two sim card and always phone told me that i dont select deafault sim to sms. I do that but nothing change

 

[mentao]

I, as well as someone else in thread, had the same issue with not being able to boot this recovery, however I did have success using Electimon's modded recovery that you can find here...

index - powered by h5ai v0.29.2 (https://larsjung.de/h5ai/)

index - powered by h5ai v0.29.2 (https://larsjung.de/h5ai/)

build.lolinet.com

That recovery worked for me, in place of the one listed in this thread.

Thanks for the link, that really helped me out

Also, for others who are as clueless as myself: I tried just booting without flashing via

fastboot boot LOSrecovery.img

and that lead to a boot loop. But just flashing and then rebooting into recovery works fine:

fastboot flash boot LOSrecovery.img

 

[marcusah123]

I had the same issue, bu eventually found a working LOSRecovery.img as well but I really want TWRP to work. I have the same issue with TWRP, where it will flash the screen and not boot or it will cause a boot hang when I try to load TWRP without flashing it. Ideas?

Thanks

 

[Windoors]

Installation getting suck at 47% and then aborting. Device getting hard bricked. Luckily was able to revive using blankflash.

 

[Hazuki Amamiya]

I am having the same issue with edge S RETCN. What's making worse is that after few attempts of
blankflash:

D:\Edges\blankflash_nio_retca_RRTS31.Q1-84-24-3-6>.\qboot.exe blank-flash

Motorola qboot utility version 3.86

[  0.000] Opening device: \\.\COM4
[  0.014] Detecting device
[ 34.553] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 34.553] Check qboot_log.txt for more details
[ 34.553] Total time: 34.553s

FAILED: qb_flash_singleimage()->sahara_greet_device()->change_mode()->do_hello()->IO error

D:\Edges\blankflash_nio_retca_RRTS31.Q1-84-24-3-6>pause

Press any key to continue . . .

The phone's QDLoader is becoming unrecognized (Device Descriptor Request failed).

Any help is appreciated.

 

[Hazuki Amamiya]

Okay, I somehow managed to get back QDLoader by resetting the battery (yes, I have to open the lid). I was not able to recover the phone via official tools "Rescue and Smart Assistant" and luckily there is a "tinyflashscript" that allowed me to do a full firmware flash with factory reset.

This is NOT FUN. I will stay away from trying LineageOS for a while

 

[marcusah123]

Hello,

Sorry this happened, I noticed that the unit will not show up properly as a serial device unless you hold the power button down long enough for it to recognize and not have a device descriptor failure. Well when it shows up only as a serial device that is.

Thanks

 

[marcusah123]

I noticed the icon bar at the top of the screen cuts off icons if yiu have too many on the left side. Does this happen on stock?

 

[HackVasant]

@dianlujitao Thanks for the ROM.

Everything works except that I cannot install any out of tree drivers that i built, even with root access.
The issue is the kernel config has (CONFIG_MODULE_SIG_FORCE=y ) which requires a signed module.
So at this point I would have to build the kernel plus all the modules a somewhat tedious exercise -.

I am upgrading form MotoG7 (river) running Lineage OS 18.1 and the kernel config for reference has:
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_FORCE_LOAD=y
This is a much more hacker friendly kernel -. I hope you will consider these changes in your future build.
For now I am going to switch to the EvolutionX ROM which has the above kernel config settings.

Thanks again for your effort.

 

[Windoors]

Location still not working.

 

[zsiezi]

Hey everyone, I need some feedback on how good everything works with the 19.1 official. Is it stable enough as a daily driver? Are there any (minor) flaws I should know about before flashing?

Thanks in advance!

 

[CCivale]

Hey everyone, I need some feedback on how good everything works with the 19.1 official. Is it stable enough as a daily driver? Are there any (minor) flaws I should know about before flashing?

Thanks in advance!

If you have any specific questions about what works and doesn't, we can move over to the 19.1 thread and I'll continue there. I've been running it since Sunday as my daily driver and I'm enjoying it.

Edit: Just saw that the thread is still marked "beta", but we can chat there.

 

[sip4050sip]

I, as well as someone else in thread, had the same issue with not being able to boot this recovery, however I did have success using Electimon's modded recovery that you can find here...

index - powered by h5ai v0.29.2 (https://larsjung.de/h5ai/)

index - powered by h5ai v0.29.2 (https://larsjung.de/h5ai/)

build.lolinet.com

That recovery worked for me, in place of the one listed in this thread.

I had the same problem, even with e/ os and that LOSrecovery.img saved me!

 

[sip4050sip]

Solved

 

[fuluel]

I am tring to flash LineageOS 18.1, but it always failed when I sideload the OS zip file. I had skiped the sideload copy-partitions-20220613-signed.zip

Is this guide https://wiki.lineageos.org/devices/nio/install/variant1 apply to 18.1 as well? Or is it only for 20.0?
Should I use copy-partitions-20220613-signed.zip for 18.1 as well?