• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][Official][Nightly] LineageOS 18.1 for OnePlus 3/3T

Search This thread

denver04

Member
Jun 14, 2017
6
0
@Not-Aus

Is clean flashing really necessary or just a precaution? I did a dirty flash on my main phone (OP3T) from 17.1 to 18.1 without any problems, though I didn't have google stuff on that device.
 

Not-Aus

Senior Member
Is clean flashing really necessary or just a precaution? I did a dirty flash on my main phone (OP3T) from 17.1 to 18.1 without any problems.

When you are fine with that, feel free to go. But when problems occur, chances are high that they are because of dirty flashing. Consence is that a clean install is highly recommended.
 
  • Like
Reactions: nvertigo67

turbocoupe

New member
Nov 27, 2021
1
0
Need help! I did a clean install of the most recent nightly, and everything works except camera. Whatever camera app I install, the camera just either shows a black screen or the app crashes. Has anyone experienced this and have an idea how to fix?
 

rikeka

Senior Member
Jun 6, 2016
81
11
Need help! I did a clean install of the most recent nightly, and everything works except camera. Whatever camera app I install, the camera just either shows a black screen or the app crashes. Has anyone experienced this and have an idea how to fix?
Hello, I had the same issue when I enabled "Sensors off" in my settings. Once I disabled it, the camera works perfectly fine. Hope this helps you :)
 
smooth and stable
would have made daily driver if face unlock available
please add face unlock?

I think (and I'm willing to be corrected about this) you may be out of luck there. Official LineageOS releases are, by and large, identical to each other, with only minor variations related to some hard-ware specific features (like support for the OnePlus alert slider). This is by design, as one can move from one LineageOS-equipped device to another and be assured of the same, familiar experience. If face unlock were to be added, it would no longer be "stock" LineageOS. If this is something you really, desperately want, I think you'll have to look for another ROM (or perhaps an app? I haven't looked) that supports it.
 
I think (and I'm willing to be corrected about this) you may be out of luck there. Official LineageOS releases are, by and large, identical to each other, with only minor variations related to some hard-ware specific features (like support for the OnePlus alert slider). This is by design, as one can move from one LineageOS-equipped device to another and be assured of the same, familiar experience. If face unlock were to be added, it would no longer be "stock" LineageOS. If this is something you really, desperately want, I think you'll have to look for another ROM (or perhaps an app? I haven't looked) that supports it.
Hmm I understand,
Will try Project Sakura.
 

Yudh

Senior Member
Dec 19, 2015
997
491
Mumbai
OnePlus Nord 2 5G
Can someone please upload the inbuilt ringtones and sounds of lineageos and share a link with me.
I really miss those on my new device.

It's location must be in one of the below places

Root>> system>>product>>media
Or
Root>>system_ext>>media
 

Jan_L

Senior Member
Jan 15, 2021
64
50
Samsung Galaxy S7
OnePlus 3T
Can someone please upload the inbuilt ringtones and sounds of lineageos and share a link with me.
I really miss those on my new device.

It's location must be in one of the below places

Root>> system>>product>>media
Or
Root>>system_ext>>media
You could ofcourse also download the LOS zip and extract the files yourself.
Though, a little Google search gave me this result which can maybe help?:
 
  • Like
Reactions: nvertigo67

Yudh

Senior Member
Dec 19, 2015
997
491
Mumbai
OnePlus Nord 2 5G
You could ofcourse also download the LOS zip and extract the files yourself.
Though, a little Google search gave me this result which can maybe help?:
Thanks for your help
 
  • Like
Reactions: Jan_L

Der-Knuffi

Senior Member
Jul 23, 2012
958
212
OnePlus 3
Samsung Galaxy A71
Hi guys,
I have a problem on 18.1 I already had on 17.1 (and it was the reason I switched to 18.1):
I get regular freezes with afterwards black screen and the LED going on when using Google News or Chrome.
I thought it was a specific 17.1 problem but shortly after setting up everything, I have it again.
Can you help me?
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    I'm wondering if @dianlujitao (or anyone else) has begun work on bringing LineageOS 19.0 to the 3/3T (or if it's even possible). I know that there are likely a lot of people who'd like to upgrade their devices to the New Hotness, and as for myself, I use my old 3T (which has a broken auto-focus, which is why it's no longer my daily driver) as a test bed for developing my own personal fork of LineageOS. If 19.0 is in the development or planning stages, excellent news (and if not, I'll probably have to grab a different phone to use as my test bed, as I need my main phone too much to risk using it in that capacity).
    Not at all. On one hand, I've been busy with my real-life works recently and don't have spare time for such things. On the other hand, porting S to legacy devices is non-trivial due to missing bpf support on old kernels.
    1
    i see @dlas.dl working on 4.4 kernel here https://github.com/dlasdl/msm-4.4. is there any progress?
    It was dropped afaik. He told in Telegram that he dropped it
  • 45
    LineageOS is a free, community-built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
    Code:
    #include <std_disclaimer.h>
    
    /*
    * Your warranty is now void.
    *
    * We are not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at us for messing up your device, we will laugh at you.
    *
    */
    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.

    Important information:
    This thread is for LineageOS 18.1 builds for OnePlus 3/3T. The following will not be supported here:
    • Custom kernels
    • Mods
    • Xposed

    We don't support Xposed and any logcat which includes an Xposed module will be ignored. You're kindly invited to not report bugs if you:
    • Flashed a custom kernel
    • Installed or did mods from untrusted sources
    • Modified system files

    Tips:
    • You need at least OxygenOS 9.0.2 firmware, otherwise you'll get error 7 when installing the zip. Latest firmware is recommended.

    Installation:
    First time flashing LineageOS 18.1 on your device, or coming from another ROM?
    1. Download the zip(s)
    2. Install a compatible Recovery (Official TWRP 3.4+ is highly recommended: https://dl.twrp.me/oneplus3/)
    3. Perform a nandroid backup of your current ROM (Optional)
    4. Wipe data/factory reset
    5. Flash LineageOS
    6. Optional: Install the Google Apps addon package
    7. Reboot

    Source code:

    Credits:
    • LineageOS Team & Contributors
    • Code Aurora Forum
    • ......

    Changelog and Download:
    Known issues:​
    • This build is HIGHLY EXPERIMENTAL and NOT WELL TESTED.
    • Wifi display not work, don't ever attempt to use it or the system will crash.
    • VoLTE is not tested and I don't know if it ever works, please give feedback if you're able to verify.
    • Fixed the sensor_SMD wakelock
    • Fixed ringtone when bluetooth headset connected
    13
    Regarding the sensor_SMD wake lock:
    Generally, the rom can go for long periods without this wake lock showing up:
    View attachment 5215977View attachment 5215981
    But the wake lock can start at random times:
    View attachment 5215983View attachment 5215985
    And when it starts, it will stop the device from going into deep sleep (look at the "Awake (Screen off)" figures). This will drain the battery a lot faster than normal. See 210209-174541-log.zip for logs.

    However, I find that the wake lock will always start when the phone is fully recharged (I usually do this just before I go to bed). See 210209-174541-log.zip for logs.
    View attachment 5215983View attachment 5216001

    Fortunately, a reboot gets rid of the wake lock.
    Nice finding. Just check the source and that should be the Significant Motion Detector if I'm not wrong. Dunno if there are any drawbacks but you should be able to disable it by adding " ro.vendor.sensors.smd=false" to /vendor/build.prop, please try if it helps.
    13
    I've been running this rom for a week now. I've not had any problems with it - no system reboots, no system FCs, no performance lags or stutters (though I don't play games).
    Battery life is not quite as good as 17.1, but I still only charge the phone once a day. Of course this is with the fix for the sensor_SMD wake lock from https://forum.xda-developers.com/t/...s-18-1-for-oneplus-3-3t.4230665/post-84465491
    The only other minor annoyance than the issues I mentioned in https://forum.xda-developers.com/t/...s-18-1-for-oneplus-3-3t.4230665/post-84456483 is that there's no "Mark as read" option on SMS notifications.

    Great work @dianlujitao! This is now my daily driver. I look forward it becoming an official version.
    12
    Regarding the sensor_SMD wake lock:
    Generally, the rom can go for long periods without this wake lock showing up:
    Screenshot_20210210-044409_BBS.pngScreenshot_20210210-044354_BBS.png
    But the wake lock can start at random times:
    Screenshot_20210209-174523_BBS.pngScreenshot_20210209-174531_BBS.png
    And when it starts, it will stop the device from going into deep sleep (look at the "Awake (Screen off)" figures). This will drain the battery a lot faster than normal. See 210209-174541-log.zip for logs.

    However, I find that the wake lock will always start when the phone is fully recharged (I usually do this just before I go to bed). See 210209-174541-log.zip for logs.
    Screenshot_20210209-174523_BBS.pngScreenshot_20210209-202825_BBS.png

    Fortunately, a reboot gets rid of the wake lock.
    12
    I just built LOS 18.1 (see attached roomservice.xml for OP3/3T and OP5T) for testing (with the March security update - see attached screenshot).
    I successfully flashed LOS 18.1 on official LOS 17.1 via a dirty flash (wipe system/caches + flash build & MindTheGapps-11.0.0-arm64-20210220_140101).
    Note that I didn't flash Magisk and that safetynet passed (see attached screenshot - my BL is locked)
    Download :
    - Build 0312 : https://androidfilehost.com/?fid=2188818919693753932
    - MindTheGapp : https://wiki.lineageos.org/gapps.html

    Thanks for the great job @dianlujitao !
    DOWNLOAD:
    * Build type : unofficial ... daily or weekly ... it depends on LOS gerrit
    * Synced LineageOS sources
    * All credit goes to LOS Team and @dianlujitao
    ==> https://androidfilehost.com/?w=files&flid=323965&sort_by=date&sort_dir=DESC