• If you are experiencing issues logging in, we moved to a new and more secure software and older account passwords were not able to be migrated. We recommend trying to reset your password, then contacting us if there are issues.
  • Nearly done! Migration cleanup is mostly done. There are a small number of issues left that we continue to work on, but all the heavy lifting is done. We still would love to hear feedback over at this thread and also check out the new XDA app! Thanks and we hope you enjoy the new forums, and thanks for your support of XDA <3

[ROM][OFFICIAL][Oneplus 2][9.0] AICP P 14.0 | Pie 9.0

[email protected]

Senior Member
Apr 4, 2013
161
191
43
Sangamner




AICP
Android Ice Cold Project

AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!

Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and we are now based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.

If there are any bugs, either we will sort them out or the GZOSP team, if it concerns their code base. This ROM isn't GZOSP supported, so there is no need to report errors/bugs to them!!


Code:
#include <std_disclaimer.h>

/*
 * Your warranty is now void.
 *
 * We are not responsible for bricked devices, dead SD cards,
 * thermonuclear war or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications and if
 * you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
 *
 */

Feature list (rough overview)




In the beginning we would like to thank:

GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...



@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@Drgravy
@Hashbang173
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...




We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!





Latest Stable Release Version 14.0

Download link:https://dwnld.aicp-rom.com/

Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.





Full Changelog link: https://dwnld.aicp-rom.com/

Google Apps:
(link the best one for your device, there are several variants out there right now, pico/nano GApps from opengapps.org is almost always a good choice though)



Device reboots after turning wifi-hotspot off.
You tell me ... :p

FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look in the OP to see if your device is built on a nightly or weekly schedule.

Q. Does this ROM support custom kernels?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!

Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.

Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. You will need to use the version arm64/arm/whatever for SDK 27.

Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...

Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.

Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.

Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.

Using the ROM:

Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.

Q. I keep losing root with Magisk, how do I fix it?
A. Check this out. If that doesn't work for you, ask for help in this thread, read or ask in the Magisk thread on XDA or just re-flash Magisk!

Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this

Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)

Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.




The ROM should contain everything you need to enjoy Android Pie. You don't need to install any Add-on's, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.

It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.

How to flash for the first time:
(Again: Don't do it if you don't know it!)

1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, Data and ART/Dalvik cache.
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure might vary from device to device and is a bit different on system updates!


The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every OTA update (= ROM Update)



Currently supported Root Solution:

Magisk stable
Magisk versions higher than 17.2 doesn't usually require to be flashed on every dirty flash. Depending on the device, you may need to flash it every time. Unless your maintainer says otherwise it should be fine.


PREREQUISITE FOR OTA ("Over-The-Air" Updates):
To be able to flash using the built-in OTA app, TWRP recovery is needed.
Please be sure that you are on the latest TWRP recovery. Keep in mind that this could also be an unofficial version!

If you want to contribute to the AICP or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)



Kernel source:https://github.com/OP2-Pie/android_kernel_oneplus_msm8994

ROM & Additional links:
AICP Gerrit Code Review
AICP on Github


AICP G+ community



ROM OS Version: 9.0.x Pie
Kernel: Linux 3.10.108

Version Information:
Status: Unofficial
Release Date: 11-26-2018

You want to see a "normal" night at the "DEV office", click here!!

XDA:DevDB Information
[ROM][OFFICIAL][Oneplus 2][9.0] AICP P 14.0 | Pie 9.0, ROM for the OnePlus 2

Contributors
[email protected]
ROM OS Version: 9.x Pie

Version Information
Status: Beta

Created 2019-04-14
Last Updated 2019-04-19
 
Last edited:

[email protected]

Senior Member
Apr 4, 2013
161
191
43
Sangamner
Changelog :
26/11/2018
-Initial release.

28/11/2018
-added kcal
-enabled dexpreopt
-synced with latest sources

29/11/2018
-fixed settings not opening
-added QS styles

09/12/2018
-speedup unlock animation
-voltage control for kernel
-latest aicp goodies
-fastcharge

10/12/2018
-fixed reboots after turning hotspot off
-built with latest aicp sources

17/12/2018
-reboots after turning hotspot off are gone now(personally tested)
-enabled fling and pulse
-fixed screen tearing
-Oneplus Doze
-device should be smoother now

01/01/2019
-fixed hw button light
-added hw key customization
-added elementalx governor
-many kernel side patches
-built with latest aicp sources

25/02/2019
- added navigation gestures
- removed elementalX for now
- built with latest aicp sources
 
Last edited:

jukyO

Elite Member
Feb 2, 2011
2,653
607
113
Ogulin
I will try it today hopefully.
Installation went flawlessly.
Fairly fast 1st boot.

So far one minor issue noticed. When changing to dark/black mode, UI hangs a bit ( expected).
Then On screen navigation appears, which I have disabled before.

Solution was to re-enable and then back to disable on screen navigation.

Overall, good work!

---------- Post added at 12:42 PM ---------- Previous post was at 11:56 AM ----------

@[email protected]

is your rom LOS or AOSP based? I plan to try one of the kernels, so I have to know which to use.
Thank you.
 

dajosova

Senior Member
Aug 18, 2007
67
3
0
Aveiro
What GAPPS!?

Many thanks for this ROM.
It's my first time with AICP.
...what GAPPS should I use with it?
Tried to install today's official OpenGAPPS "open_gapps-arm64-9.0-super-20181126.zip" but gave me error 70 within TWRP !!!
What should I do?
Thnx ;)
 

pops106

Senior Member
Aug 29, 2008
501
264
63
Thanks for this always a massive fan of AICP, will try it soon

---------- Post added at 10:15 PM ---------- Previous post was at 10:14 PM ----------

Installation went flawlessly.
Fairly fast 1st boot.

So far one minor issue noticed. When changing to dark/black mode, UI hangs a bit ( expected).
Then On screen navigation appears, which I have disabled before.

Solution was to re-enable and then back to disable on screen navigation.

Overall, good work!

---------- Post added at 12:42 PM ---------- Previous post was at 11:56 AM ----------

@[email protected]

is your rom LOS or AOSP based? I plan to try one of the kernels, so I have to know which to use.
Thank you.
AOSP buddy
 
  • Like
Reactions: Drhedphuk and jukyO

[email protected]

Senior Member
Apr 4, 2013
161
191
43
Sangamner
Installation went flawlessly.
Fairly fast 1st boot.

So far one minor issue noticed. When changing to dark/black mode, UI hangs a bit ( expected).
Then On screen navigation appears, which I have disabled before.

Solution was to re-enable and then back to disable on screen navigation.

Overall, good work!

---------- Post added at 12:42 PM ---------- Previous post was at 11:56 AM ----------

@[email protected]

is your rom LOS or AOSP based? I plan to try one of the kernels, so I have to know which to use.
Thank you.
Don't try ant custom kernels rn..none of them will work
 

dajosova

Senior Member
Aug 18, 2007
67
3
0
Aveiro
"6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering."

Why enabling USB Tethering by default? In my Windows 10, after connecting with USB cable my phone restarts.
Issue surpassed by not using Thetering!

---------- Post added at 01:35 PM ---------- Previous post was at 01:31 PM ----------

Are you guys clean flashing the ROM?

I don't have network problems and selfie camera works for me.


Sent from my OnePlus2 using XDA Labs
Yep... clean flashing!!! Nor default Camera app nor other camera app recognizes selfie cam. There's not even a switch icon to change from rear to front camera. In my previous ROM was working, so, not my phone's hardware problem... I guess!