[ROM][OFFICIAL][OOS CAM][OnePlus 8T/9R][12.1.0_r11]Nameless AOSP[2022/07/23]

Search This thread

ruredi87

New member
May 18, 2022
3
0
Hi everyone.My phone is Oneplus 9R 12gb model I want to install this rom but My IMEI number is different because of my country's bullsh*ts. Will IMEI number return to original if I install it. If somebody knows it please answer.I could not find any answer on internet. Thank you
 

MadMic

Senior Member
Jun 5, 2007
159
28
Bedford
OnePlus 8T
I think IMEI is burnt into a chip. But if you swap ROM then can't you follow the process to change the IMEI again?

And pretty sure this is illegal in a lot of places, certainly is in the UK
 
  • Like
Reactions: ruredi87

ruredi87

New member
May 18, 2022
3
0
I think IMEI is burnt into a chip. But if you swap ROM then can't you follow the process to change the IMEI again?

And pretty sure this is illegal in a lot of places, certainly is in the UK
Thank you for your response, sir. Yes It is illegal in our country too (Turkey) but our government is so stupid, they're trying to fix economy with absurbt taxes, so people can't buy phones or electronics, and they think they are holding dollars in government bank.However, the problem is I can't change IMEI by myself I have to pay it and travel somewhere else, and I don't really want it now. I bought my phone yesterday, before that I was looking to Oneplus 9 pro. I know, some models except Europe losing their IMEI numbers if you update to android 12. That is the reason I'm scared. I wanted to ask first before act. Sir, also you are the one person I communicated on internet. My warp charge is also not working, I factory resetted phone several times, also disabled optimized charging. Is there any algorithm for warp charge. I would be appreciated if you answer my 2 questions.
 

zaffar.mughal

Senior Member
Aug 22, 2015
113
13
Hello guys!
need your help to disable call recording announcement. I have used TTSlexx but it's not working.
Any advice on that please,??
 

Ankumo

New member
Mar 31, 2020
2
0
But bro, shouldn't it be normal that I can use my fingerprint to unlock at any time?
With nameless I have to light the screen or wait for the aod to show up to use the fingerprint. I don't think it's normal 😂
I'm on OOS 11.2.5.5 currently. Looking into flashing this rom. Double checked it and it seems like this is normal behaviour on stock.

Update: Just flashed... Can confirm this is really bad :( Sometimes it's not reacting to my finger even on AOD at all. And if you disable AOD, the fingerprint area is not lit up, so you can't use it. Only after you go to the lockscreen. And there is no AOD schedule?
 
Last edited:
This ROM is excellent but for some reason Dual Channel mode in bluetooth developer options is always grayed out. Even though my headphones support it. I am unable to use the SBC XQ mod because of this. is there any fix for this?
I have added my btsnoop log and a screenshot for confirmation. Any clarification/insight would be appreciated.
P.S. Also 48khz sampling rate support doesn't seem to be present either. The headphones and the phone definitely support it but it's not available in the ROM.
 

Attachments

  • Screenshot_20220520-023152_Settings.png
    Screenshot_20220520-023152_Settings.png
    192.2 KB · Views: 71
  • btsnoop_hci.log
    53.9 KB · Views: 7
Last edited:
  • Like
Reactions: NEO701

MadMic

Senior Member
Jun 5, 2007
159
28
Bedford
OnePlus 8T
Thank you for your response, sir. Yes It is illegal in our country too (Turkey) but our government is so stupid, they're trying to fix economy with absurbt taxes, so people can't buy phones or electronics, and they think they are holding dollars in government bank.However, the problem is I can't change IMEI by myself I have to pay it and travel somewhere else, and I don't really want it now. I bought my phone yesterday, before that I was looking to Oneplus 9 pro. I know, some models except Europe losing their IMEI numbers if you update to android 12. That is the reason I'm scared. I wanted to ask first before act. Sir, also you are the one person I communicated on internet. My warp charge is also not working, I factory resetted phone several times, also disabled optimized charging. Is there any algorithm for warp charge. I would be appreciated if you answer my 2 questions.
Warp charge is working for me on the original charger with the original cable. Check your settings, as it can be changed in there.

In terms of the IMEI, can't help you any more as never done it, and don't know the process.

Maybe if you ask the person who did your phone initially they can help you?
 
  • Like
Reactions: ruredi87

Ankumo

New member
Mar 31, 2020
2
0
AOD bug: if you use app locking with Chrome, after you locked your phone inside Chrome's app main page (with bookmarks and feed) it'll show unlocking message above AOD. And then you'll be unable to unlock your phone with finger. Only password, or you'll need to open password prompt, close it and then use finger again. Pretty frustrating. Any chance on fixing that?
 

ceusito

Member
Jun 23, 2011
19
6
Andalucía
Hi guys, I believe I have found a bug, I attached a video where you can see that the first and a second time when I switch on the screen and swipe up to face unlock it works perfect, but the third and fourth time it gets stuck at recognising faze and do nothing until I go back and then it gets recognize... It happens to me some times.

 
Last edited:

chandu dyavanapelli

Senior Member
Mar 30, 2019
453
875
Hyderabad
OnePlus 8T
OnePlus 9R
New build up

Source Changelog

• Added support to show battery info in settings

• Improved scheduled AOD/Sleep mode

• Fixed black theme for QS Panel

• NamelessLauncher: Allow to apply themed icon for app drawer

• NamelessLauncher: Fixed hidden apps

• PixelLauncher & NamelessLauncher: Import more themed icon

• Lawnchair: Updated to latest dev build

• Minor cleanup & improvements

Device Changelog

• Switch to Meteroic kernel and compiled with liyuu clang

• Switch back to Oxygen OS 11 Camera and Gallery

• Fixed audio distortion in voicecall and improved media audio

• Minor fixes & improvements
 

alboon2000

Member
May 17, 2013
17
8
How to OTA update if rooted ?
I can't uninstall magisk, as I get a message (which would be, in English, "stock image doesn't exist") when trying to uninstall/restore image.
Thank you.
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 9
    I went through this yesterday evening and hit many snags and confusions due to looking up different posts... So I thought I'd write down my process in the hope it helps others.

    Before you begin
    • Backup of all Data, Fully charged battery, really backup all your data
    • Know how to use Windows command prompt, move files and folders about in explorer (or know how to set the PATH variable)
    • Follow this guide at your own risk!

    Downloads

    Set-up
    1. Install ADB + QualCom drivers. Reboot is required
    2. To check, connect phone to PC, reboot phone to fastboot, check device manager for anything with a yellow "!". Then repeat when in recovery. If you have issues here Fix this BEFORE continuing

    On PC
    1. Extract Nameless ROM zip
    2. Extract payload extractor zip
    3. copy payload.bin from ROM to payload_input folder where you extracted payload dumper
    4. Command prompt -> run payload_dumper.exe (takes about 5 minutes)
    5. In the payload_output folder will be .img files. You'll need these later

    Roll phone back to Android 11 with MSM tool
    1. Follow msm guide: https://www.getdroidtips.com/oneplus-msm-download-tool/. Took 900s to complete
    2. Complete first boot setup sequence, don't restore any data, skip as must as you can. Don't perform system udpate. Stop apps updating.
    3. Install Oxygen Updater -> Download KB2003_11_C.21 (Android 12) ~3.88Gb
    4. Whilst that's happening: Enable Developer Mode, Enable OEM Unlocking, Enable USB Debugging
    5. Once download complete, copy the update .zip file from root of phone to your PC
    Unlock bootloader
    1. In command window: adb reboot fastboot
    2. In command window: fastboot reboot bootloader (as soon as you press enter to run the command type and run the next one so it's waiting)
      • fastboot oem unlock
    3. Accept the text menu and phone will reboot and wipes itself
    Update phone to Android 12
    1. Clear setup asap, bypass / skip / ignore all you can
    2. Copy downloaded oxygen update from PC to root of phone
    3. Local install using Oxygen download file (ignore the system update) + reboot
    4. Enable USB Debugging
    5. In command window: adb devices -> ensure you're authorised
    6. In command windows: adb reboot fastboot
    On PC
    1. In command window: open the payload_output folder (with the extracted .img files from earlier):
      • fastboot flash boot boot.img
      • fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img
      • fastboot flash --disable-verity --disable-verification vbmeta_system vbmeta_system.img
      • fastboot flash recovery recovery.img
    2. Use fastboot menus to reboot to recovery (new blue one)
    3. Press "Install update" -> "ADB Sideload"
    4. In command window: adb devices - ensure it says "sideload" and not "unauthorised"
    5. In command window: adb sideload copy-partitions-20210323_1922.zip
    6. Reboot recovery from menus on phone
    7. In command window: adb devices - ensure it says "sideload" and not unauthorised
    8. In command window: adb sideload Nameless-AOSP_kebab-12.1-20220723-1310-Official.zip
    9. Click back arrow in recovery, then click "Factory reset" -> "Format data/factory reset" -> "Format data"
    10. Click back arrow in recovery, then click "Reboot to system"
    If you miss a step and boot the phone it's likely not going to be stuffed. In this case, force it back to EDL mode (adb reboot edl) or hold the up + down volume buttons for ~40s and start with the MSM tool again.
    4
    I've been reading through some pages on this thread and I see people are having issues with this ROM, I understand that's because old nameless builds were based off OOS11 and now it's based off OOS12? Therefore, if you're freshly installing this, then there's no issues to worry about?

    I ask because I am currently on Pixelexperience and that's been abandoned, I am not sure wherever to go on this ROM (which seems like it gets constantly updated) or just wait for LineageOS to come out for 8T.

    So if I was to go on this ROM, I'd have to flash OOS12, then flash Nameless?
    That's right. This worked for me (there may be other ways to do it):

    Make sure your adb and fastboot are up to date. Many problems are caused by outdated tools.

    First flash OOS11 with the MSM tool if needed, then do a local upgrade to OOS12. I found the OOS12 ROM here:

    Then flash Nameless following the instructions here (but read the note below!):

    Note: just before doing the adb sideload, sideload the copy-partitions.zip found here:

    It will copy the current partitions from the active slot to the inactive slot.

    Don't worry about the 47% in the instructions -- just sideload the Nameless ROM and wait for it to finish, then Format data/factory reset > Format data and reboot.
    3
    I had this same problem, but I was able to get it to work. The trick is getting it to stay off long enough to use the vol up + vol down combination to enter edl mode. I pressed start on the msm tool, then fooled around with it for awhile, using the vol up + power to shut it down and then immediately using the combination to enter edl mode, and eventually it was detected by msm. It's just really finicky
    Thank you!
    Had tried holding down power to ensure it was off several times and either Vol up or Vol down with power did nothing and it continued to boot loop.
    However thanks to you holding Vol up + Vol down + power got me into fastboot weirdly
    I used fastboot set_active other (Thanks YehoshuaLee)
    Phone booted into system.

    Was seconds away from buying a Pixel 6, had already sent an email about getting an RMA to the retailer I bought the 8T from.
    2
    This is simply the way to go!
    The best ROM for the OP8T! Thanks @chandu dyavanapelli for your great work! Please keep it up!
    2
    How have you managed to install them rom? What did you do with the slots a/b?
    Here's what I did:

    Download MSM tool to convert to EU Android 11
    MSM Tool

    Enable Developer options and enable OEM unlocking.
    Enable USB Debugging
    Adb reboot bootloader

    Unlock bootloader with fastboot oem unlock

    Use oxygen updater to download the stable (full) update for oneplus8t (EU)
    Oxygen Updater

    Do a local upgrade to Android 12 with the downloaded update from oxygen updater

    Then follow the original instructions but remember to sideload the copy partitions file before the Nameless rom (see post #704)

    Make sure you download the correct Nameless AOSP Rom. When you click the download link in the main post, the big green download button is not the newest version.
    You want this one.

    That worked for me
  • 46
    nameless_logo.png

    Nameless AOSP for OnePlus 8T/9R [Unified Build] [kebab]

    Nameless AOSP is based on Android Open Source Project, inspired by Google Pixel. We offer a smooth and stable experience for your device with a selected set of amazing features that provide an exceptional user experience.

    Whats working?
    Everything working :)

    Known issues

    Nothing yet
    You tell me


    Flash Instructions
    Download
    DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED !

    Donate
    Chris Chen PayPal
    Chandu Dyavanapelli PayPal

    UPI ID: [email protected]

    Team
    Chris Chen - Founder & lead Developer
    Chandu Dyavanapelli - Co Founder & lead Developer

    Credits
    Android Open-Source Project
    Pixel Experience
    AospExtended
    Proton AOSP

    LineageOS
    Havoc OS
    Arrow OS
    Krypton


    Others, I may have forgot to mention


    Stay tuned
    Our Telegram Group

    16
    New build up!

    Source Changelog:
    - Merged android-12.0.0_r32
    - Added App Lock
    - Added Face Unlock
    - Added more fonts
    - Fixed circle battery QS tinting
    - Fixed navbar inverse layout not working after reboot
    - Fixed gaming mode settings not applied when overlay menu is disabled
    - Removed logo in settings. Simple best :)
    - Misc cleanup and improvement

    Device Changelog:
    - Switch to DaxUI for dolby
    - Improved audio experiences
    - Fixed echo's in calls
    - Fixed low Mic issues in calls
    - Misc cleanup and improvement
    11
    New Build up!

    Note
    - Supported latest Oxygen or Hydrogen OS 11 firmware
    - Dirty flash from early build is fine
    - Fingerprint & haptics may not work on custom kernel so don't spam in device support group

    Source changelog:
    - Merged July security patch (android-12.1.0_r11)
    - Switched to GameSpace, with all goods from old GamingMode kept
    - Refactored in-game lock gesture feature
    - Added Status Bar Ticker
    - Added Music QS tile
    - Added Google Lens into screenshot UI
    - Added proximity check on wake toggle
    - Added support to show battery level for AirPods series
    - Added support to reset auto brightness adjustment
    - Added more haptic feedback scenes for supported devices
    - Relax slider haptic feedback strength
    - Dropped slider haptic feedback for some devices
    - Added OPPO Sans
    - Allow receive / send any type of files from Bluetooth
    - Fixed less boring heads up toggle
    - Fixed 2-button navbar option missing
    - Improved partial screenshot
    - Improved pocket mode layout
    - Moved extra dim feature into display settings
    - Show 12L in settings and updated Easter Egg from PUI
    - Updated default wallpaper
    - Updated various system icons
    - Updated various APNs
    - Updated lawnchair to latest dev & Enabled dexpreopt
    - Other cleanup and improvements

    Device changelog:
    - Improved Haptics feedbacks. Enjoy OOS type haptic now :)
    - Improved some Chinese third-party input methods haptic feedback
    - Enable System Wide haptics feedbacks
    - Update blobs from LA.UM.9.12.r1-14200-SMxx50.QSSI13.0
    - Fixed Dolby visualizer effect
    - Attempt to match stock auto brightness behaviour
    - Attempt to fix Google AR Core
    - Fixed audio in screen cast (WiFi Display)
    - OnePlus Settings: Added support to automatically enable high touch sample / tp edge touch mode in games
    - OnePlus Settings: Increased vibrator strength level range to 5 (Only for default kernel)
    - Other cleanup and improvements
    11
    New Build Up!

    Source Changelog
    - Merged May security patch (android-12.1.0_r5)
    - Added AdGuard & Cloudflare private DNS providers
    - Added Custom carrier label & Carrier label placement
    - Added Dora & Weed status bar icons
    - Added optimized charging QS tile for supported devices
    - Allow to hide back gesture arrow
    - Allow to switch slot in recovery for AB devices
    - Refactor QS tiles layout code (Previous settings will be revoked, set again in settings)
    - Fixed partial screenshot
    - Fixed wireless emergency alerts crash in settings
    - Maybe more that I forgot

    Device Changelog
    - Restore old notification haptic intensity
    9
    I went through this yesterday evening and hit many snags and confusions due to looking up different posts... So I thought I'd write down my process in the hope it helps others.

    Before you begin
    • Backup of all Data, Fully charged battery, really backup all your data
    • Know how to use Windows command prompt, move files and folders about in explorer (or know how to set the PATH variable)
    • Follow this guide at your own risk!

    Downloads

    Set-up
    1. Install ADB + QualCom drivers. Reboot is required
    2. To check, connect phone to PC, reboot phone to fastboot, check device manager for anything with a yellow "!". Then repeat when in recovery. If you have issues here Fix this BEFORE continuing

    On PC
    1. Extract Nameless ROM zip
    2. Extract payload extractor zip
    3. copy payload.bin from ROM to payload_input folder where you extracted payload dumper
    4. Command prompt -> run payload_dumper.exe (takes about 5 minutes)
    5. In the payload_output folder will be .img files. You'll need these later

    Roll phone back to Android 11 with MSM tool
    1. Follow msm guide: https://www.getdroidtips.com/oneplus-msm-download-tool/. Took 900s to complete
    2. Complete first boot setup sequence, don't restore any data, skip as must as you can. Don't perform system udpate. Stop apps updating.
    3. Install Oxygen Updater -> Download KB2003_11_C.21 (Android 12) ~3.88Gb
    4. Whilst that's happening: Enable Developer Mode, Enable OEM Unlocking, Enable USB Debugging
    5. Once download complete, copy the update .zip file from root of phone to your PC
    Unlock bootloader
    1. In command window: adb reboot fastboot
    2. In command window: fastboot reboot bootloader (as soon as you press enter to run the command type and run the next one so it's waiting)
      • fastboot oem unlock
    3. Accept the text menu and phone will reboot and wipes itself
    Update phone to Android 12
    1. Clear setup asap, bypass / skip / ignore all you can
    2. Copy downloaded oxygen update from PC to root of phone
    3. Local install using Oxygen download file (ignore the system update) + reboot
    4. Enable USB Debugging
    5. In command window: adb devices -> ensure you're authorised
    6. In command windows: adb reboot fastboot
    On PC
    1. In command window: open the payload_output folder (with the extracted .img files from earlier):
      • fastboot flash boot boot.img
      • fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img
      • fastboot flash --disable-verity --disable-verification vbmeta_system vbmeta_system.img
      • fastboot flash recovery recovery.img
    2. Use fastboot menus to reboot to recovery (new blue one)
    3. Press "Install update" -> "ADB Sideload"
    4. In command window: adb devices - ensure it says "sideload" and not "unauthorised"
    5. In command window: adb sideload copy-partitions-20210323_1922.zip
    6. Reboot recovery from menus on phone
    7. In command window: adb devices - ensure it says "sideload" and not unauthorised
    8. In command window: adb sideload Nameless-AOSP_kebab-12.1-20220723-1310-Official.zip
    9. Click back arrow in recovery, then click "Factory reset" -> "Format data/factory reset" -> "Format data"
    10. Click back arrow in recovery, then click "Reboot to system"
    If you miss a step and boot the phone it's likely not going to be stuffed. In this case, force it back to EDL mode (adb reboot edl) or hold the up + down volume buttons for ~40s and start with the MSM tool again.