[ROM][OFFICIAL][OOS CAM][OnePlus 8T/9R][12.1.0_r11]Nameless AOSP[2022/07/23]

Search This thread

ssewk2x

Senior Member
Oct 24, 2010
1,371
1,387
Detroit, MI
OnePlus 8T
Another thing I am noticing. WiFi will occasionally shut off on its own after long idle periods, requiring me to manually turn it back on. This is around my house where I have very good wifi coverage. It happens, for example, when I have had my screen locked and the phone in my pocket for a while.

I have also, under settings->network and internet->internet->network preferences, disabled the "wifi turns off automatically" setting.
 

maamdroid

Senior Member
Jun 6, 2013
256
42
Rom is working great on my OP8T. I'm on day two. I plan to use this for quite awhile. Looking forward to trying out OTAs on this.
 
Last edited:

mmmayckkk

Member
Dec 28, 2014
6
0
Hello, I am interested in this Rom, but I would like to know if it has a call recorder and how... Dialer apk? Is its performance good? Thank you very much.
 

Ivanherrero

Member
Jul 7, 2014
31
3
hello, how can I make the face unlock work, it does not work, it does not recognize my face stays in red and tells me that it does not recognize, as I have read there are some that if they have been able to make it work, I could tell me step by step, thanks, to continue with the good work
 

Yash1213

Member
May 29, 2018
45
8
New Delhi
The vibrate and silent settings just don't seem to work for me. My phone often rings when it's vibrate/silent. Anyone know how to fix it?
 

pakifood

Member
Sep 19, 2012
18
1
I was encountering an extremely strange bug. My phone locked to the lock screen, and then kept flashing it - screen off, lockscreen, screen off, lockscreen. Except on the lockscreen, the clock was missing. All it showed was a lock button where the fingerprint sensor is, and a solid white back button on the bottom left. I couldn't unlock or press anything. I was able to take a screenshot while it was happening.

I plugged my phone in to my computer (USB debugging enabled) and it started again. But then after a while it stopped. Just switched to nameless launcher from pixel launcher hoping it will resolve the issue.

anyone else run into this? any fix? I'm on the latest OTA patch. OP8T

UPDATE: happening on nameless launcher too. Anyway to fix without factory resetting would be great.
Screenshot_20220526-150610_Discord.png
 
Last edited:

Sincerinhoo

Senior Member
Mar 30, 2010
95
4
Den Haag
Ok so i download this ROM via a Youtube Channel. I'm om in 23-january version. All went well and all is installed. Now i looked for system updates, found the last version from 22-may, download it, installed and. Hit reboot and now im stuck in Fastboot mode. No matter what option i choose it keeps going into fastboot. What am i missing here....
 

pakifood

Member
Sep 19, 2012
18
1
Ok so i download this ROM via a Youtube Channel. I'm om in 23-january version. All went well and all is installed. Now i looked for system updates, found the last version from 22-may, download it, installed and. Hit reboot and now im stuck in Fastboot mode. No matter what option i choose it keeps going into fastboot. What am i missing here....

this should fix it
 
  • Like
Reactions: Sincerinhoo

Sincerinhoo

Senior Member
Mar 30, 2010
95
4
Den Haag

this should fix it
You sir are a 'lifesaver'. Many thanks for the quick response. OTA is installed and running. Ooh already so much better then what i had haha
 

Sincerinhoo

Senior Member
Mar 30, 2010
95
4
Den Haag
When i try to select the oneplus launcher it's tripping real bad saying this application is only suited for oneplus phone (yeah no sh*t). If select it as default launcher, restarted multiiple times but keeps on crashing. Pixel is working fine but prefer oneplus launcher

Advise?
 

pakifood

Member
Sep 19, 2012
18
1
I was encountering an extremely strange bug. My phone locked to the lock screen, and then kept flashing it - screen off, lockscreen, screen off, lockscreen. Except on the lockscreen, the clock was missing. All it showed was a lock button where the fingerprint sensor is, and a solid white back button on the bottom left. I couldn't unlock or press anything. I was able to take a screenshot while it was happening.

I plugged my phone in to my computer (USB debugging enabled) and it started again. But then after a while it stopped. Just switched to nameless launcher from pixel launcher hoping it will resolve the issue.

anyone else run into this? any fix? I'm on the latest OTA patch. OP8T

UPDATE: happening on nameless launcher too. Anyway to fix without factory resetting would be great.
Screenshot_20220526-150610_Discord.png

Gave up and did a factory reset :( hope I don't run into this again.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 10
    I went through this yesterday evening and hit many snags and confusions due to looking up different posts... So I thought I'd write down my process in the hope it helps others.

    Before you begin
    • Backup of all Data, Fully charged battery, really backup all your data
    • Know how to use Windows command prompt, move files and folders about in explorer (or know how to set the PATH variable)
    • Follow this guide at your own risk!

    Downloads

    Set-up
    1. Install ADB + QualCom drivers. Reboot is required
    2. To check, connect phone to PC, reboot phone to fastboot, check device manager for anything with a yellow "!". Then repeat when in recovery. If you have issues here Fix this BEFORE continuing

    On PC
    1. Extract Nameless ROM zip
    2. Extract payload extractor zip
    3. copy payload.bin from ROM to payload_input folder where you extracted payload dumper
    4. Command prompt -> run payload_dumper.exe (takes about 5 minutes)
    5. In the payload_output folder will be .img files. You'll need these later

    Roll phone back to Android 11 with MSM tool
    1. Follow msm guide: https://www.getdroidtips.com/oneplus-msm-download-tool/. Took 900s to complete
    2. Complete first boot setup sequence, don't restore any data, skip as must as you can. Don't perform system udpate. Stop apps updating.
    3. Install Oxygen Updater -> Download KB2003_11_C.21 (Android 12) ~3.88Gb
    4. Whilst that's happening: Enable Developer Mode, Enable OEM Unlocking, Enable USB Debugging
    5. Once download complete, copy the update .zip file from root of phone to your PC
    Unlock bootloader
    1. In command window: adb reboot fastboot
    2. In command window: fastboot reboot bootloader (as soon as you press enter to run the command type and run the next one so it's waiting)
      • fastboot oem unlock
    3. Accept the text menu and phone will reboot and wipes itself
    Update phone to Android 12
    1. Clear setup asap, bypass / skip / ignore all you can
    2. Copy downloaded oxygen update from PC to root of phone
    3. Local install using Oxygen download file (ignore the system update) + reboot
    4. Enable USB Debugging
    5. In command window: adb devices -> ensure you're authorised
    6. In command windows: adb reboot fastboot
    On PC
    1. In command window: open the payload_output folder (with the extracted .img files from earlier):
      • fastboot flash boot boot.img
      • fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img
      • fastboot flash --disable-verity --disable-verification vbmeta_system vbmeta_system.img
      • fastboot flash recovery recovery.img
    2. Use fastboot menus to reboot to recovery (new blue one)
    3. Press "Install update" -> "ADB Sideload"
    4. In command window: adb devices - ensure it says "sideload" and not "unauthorised"
    5. In command window: adb sideload copy-partitions-20210323_1922.zip
    6. Reboot recovery from menus on phone
    7. In command window: adb devices - ensure it says "sideload" and not unauthorised
    8. In command window: adb sideload Nameless-AOSP_kebab-12.1-20220723-1310-Official.zip
    9. Click back arrow in recovery, then click "Factory reset" -> "Format data/factory reset" -> "Format data"
    10. Click back arrow in recovery, then click "Reboot to system"
    If you miss a step and boot the phone it's likely not going to be stuffed. In this case, force it back to EDL mode (adb reboot edl) or hold the up + down volume buttons for ~40s and start with the MSM tool again.
    5
    I've been reading through some pages on this thread and I see people are having issues with this ROM, I understand that's because old nameless builds were based off OOS11 and now it's based off OOS12? Therefore, if you're freshly installing this, then there's no issues to worry about?

    I ask because I am currently on Pixelexperience and that's been abandoned, I am not sure wherever to go on this ROM (which seems like it gets constantly updated) or just wait for LineageOS to come out for 8T.

    So if I was to go on this ROM, I'd have to flash OOS12, then flash Nameless?
    That's right. This worked for me (there may be other ways to do it):

    Make sure your adb and fastboot are up to date. Many problems are caused by outdated tools.

    First flash OOS11 with the MSM tool if needed, then do a local upgrade to OOS12. I found the OOS12 ROM here:

    Then flash Nameless following the instructions here (but read the note below!):

    Note: just before doing the adb sideload, sideload the copy-partitions.zip found here:

    It will copy the current partitions from the active slot to the inactive slot.

    Don't worry about the 47% in the instructions -- just sideload the Nameless ROM and wait for it to finish, then Format data/factory reset > Format data and reboot.
    3
    I had this same problem, but I was able to get it to work. The trick is getting it to stay off long enough to use the vol up + vol down combination to enter edl mode. I pressed start on the msm tool, then fooled around with it for awhile, using the vol up + power to shut it down and then immediately using the combination to enter edl mode, and eventually it was detected by msm. It's just really finicky
    Thank you!
    Had tried holding down power to ensure it was off several times and either Vol up or Vol down with power did nothing and it continued to boot loop.
    However thanks to you holding Vol up + Vol down + power got me into fastboot weirdly
    I used fastboot set_active other (Thanks YehoshuaLee)
    Phone booted into system.

    Was seconds away from buying a Pixel 6, had already sent an email about getting an RMA to the retailer I bought the 8T from.
    2
    This is simply the way to go!
    The best ROM for the OP8T! Thanks @chandu dyavanapelli for your great work! Please keep it up!
    2
    How have you managed to install them rom? What did you do with the slots a/b?
    Here's what I did:

    Download MSM tool to convert to EU Android 11
    MSM Tool

    Enable Developer options and enable OEM unlocking.
    Enable USB Debugging
    Adb reboot bootloader

    Unlock bootloader with fastboot oem unlock

    Use oxygen updater to download the stable (full) update for oneplus8t (EU)
    Oxygen Updater

    Do a local upgrade to Android 12 with the downloaded update from oxygen updater

    Then follow the original instructions but remember to sideload the copy partitions file before the Nameless rom (see post #704)

    Make sure you download the correct Nameless AOSP Rom. When you click the download link in the main post, the big green download button is not the newest version.
    You want this one.

    That worked for me
  • 46
    nameless_logo.png

    Nameless AOSP for OnePlus 8T/9R [Unified Build] [kebab]

    Nameless AOSP is based on Android Open Source Project, inspired by Google Pixel. We offer a smooth and stable experience for your device with a selected set of amazing features that provide an exceptional user experience.

    Whats working?
    Everything working :)

    Known issues

    Nothing yet
    You tell me


    Flash Instructions
    Download
    DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED !

    Donate
    Chris Chen PayPal
    Chandu Dyavanapelli PayPal

    UPI ID: [email protected]

    Team
    Chris Chen - Founder & lead Developer
    Chandu Dyavanapelli - Co Founder & lead Developer

    Credits
    Android Open-Source Project
    Pixel Experience
    AospExtended
    Proton AOSP

    LineageOS
    Havoc OS
    Arrow OS
    Krypton


    Others, I may have forgot to mention


    Stay tuned
    Our Telegram Group

    16
    New build up!

    Source Changelog:
    - Merged android-12.0.0_r32
    - Added App Lock
    - Added Face Unlock
    - Added more fonts
    - Fixed circle battery QS tinting
    - Fixed navbar inverse layout not working after reboot
    - Fixed gaming mode settings not applied when overlay menu is disabled
    - Removed logo in settings. Simple best :)
    - Misc cleanup and improvement

    Device Changelog:
    - Switch to DaxUI for dolby
    - Improved audio experiences
    - Fixed echo's in calls
    - Fixed low Mic issues in calls
    - Misc cleanup and improvement
    11
    New Build up!

    Note
    - Supported latest Oxygen or Hydrogen OS 11 firmware
    - Dirty flash from early build is fine
    - Fingerprint & haptics may not work on custom kernel so don't spam in device support group

    Source changelog:
    - Merged July security patch (android-12.1.0_r11)
    - Switched to GameSpace, with all goods from old GamingMode kept
    - Refactored in-game lock gesture feature
    - Added Status Bar Ticker
    - Added Music QS tile
    - Added Google Lens into screenshot UI
    - Added proximity check on wake toggle
    - Added support to show battery level for AirPods series
    - Added support to reset auto brightness adjustment
    - Added more haptic feedback scenes for supported devices
    - Relax slider haptic feedback strength
    - Dropped slider haptic feedback for some devices
    - Added OPPO Sans
    - Allow receive / send any type of files from Bluetooth
    - Fixed less boring heads up toggle
    - Fixed 2-button navbar option missing
    - Improved partial screenshot
    - Improved pocket mode layout
    - Moved extra dim feature into display settings
    - Show 12L in settings and updated Easter Egg from PUI
    - Updated default wallpaper
    - Updated various system icons
    - Updated various APNs
    - Updated lawnchair to latest dev & Enabled dexpreopt
    - Other cleanup and improvements

    Device changelog:
    - Improved Haptics feedbacks. Enjoy OOS type haptic now :)
    - Improved some Chinese third-party input methods haptic feedback
    - Enable System Wide haptics feedbacks
    - Update blobs from LA.UM.9.12.r1-14200-SMxx50.QSSI13.0
    - Fixed Dolby visualizer effect
    - Attempt to match stock auto brightness behaviour
    - Attempt to fix Google AR Core
    - Fixed audio in screen cast (WiFi Display)
    - OnePlus Settings: Added support to automatically enable high touch sample / tp edge touch mode in games
    - OnePlus Settings: Increased vibrator strength level range to 5 (Only for default kernel)
    - Other cleanup and improvements
    11
    New Build Up!

    Source Changelog
    - Merged May security patch (android-12.1.0_r5)
    - Added AdGuard & Cloudflare private DNS providers
    - Added Custom carrier label & Carrier label placement
    - Added Dora & Weed status bar icons
    - Added optimized charging QS tile for supported devices
    - Allow to hide back gesture arrow
    - Allow to switch slot in recovery for AB devices
    - Refactor QS tiles layout code (Previous settings will be revoked, set again in settings)
    - Fixed partial screenshot
    - Fixed wireless emergency alerts crash in settings
    - Maybe more that I forgot

    Device Changelog
    - Restore old notification haptic intensity
    10
    I went through this yesterday evening and hit many snags and confusions due to looking up different posts... So I thought I'd write down my process in the hope it helps others.

    Before you begin
    • Backup of all Data, Fully charged battery, really backup all your data
    • Know how to use Windows command prompt, move files and folders about in explorer (or know how to set the PATH variable)
    • Follow this guide at your own risk!

    Downloads

    Set-up
    1. Install ADB + QualCom drivers. Reboot is required
    2. To check, connect phone to PC, reboot phone to fastboot, check device manager for anything with a yellow "!". Then repeat when in recovery. If you have issues here Fix this BEFORE continuing

    On PC
    1. Extract Nameless ROM zip
    2. Extract payload extractor zip
    3. copy payload.bin from ROM to payload_input folder where you extracted payload dumper
    4. Command prompt -> run payload_dumper.exe (takes about 5 minutes)
    5. In the payload_output folder will be .img files. You'll need these later

    Roll phone back to Android 11 with MSM tool
    1. Follow msm guide: https://www.getdroidtips.com/oneplus-msm-download-tool/. Took 900s to complete
    2. Complete first boot setup sequence, don't restore any data, skip as must as you can. Don't perform system udpate. Stop apps updating.
    3. Install Oxygen Updater -> Download KB2003_11_C.21 (Android 12) ~3.88Gb
    4. Whilst that's happening: Enable Developer Mode, Enable OEM Unlocking, Enable USB Debugging
    5. Once download complete, copy the update .zip file from root of phone to your PC
    Unlock bootloader
    1. In command window: adb reboot fastboot
    2. In command window: fastboot reboot bootloader (as soon as you press enter to run the command type and run the next one so it's waiting)
      • fastboot oem unlock
    3. Accept the text menu and phone will reboot and wipes itself
    Update phone to Android 12
    1. Clear setup asap, bypass / skip / ignore all you can
    2. Copy downloaded oxygen update from PC to root of phone
    3. Local install using Oxygen download file (ignore the system update) + reboot
    4. Enable USB Debugging
    5. In command window: adb devices -> ensure you're authorised
    6. In command windows: adb reboot fastboot
    On PC
    1. In command window: open the payload_output folder (with the extracted .img files from earlier):
      • fastboot flash boot boot.img
      • fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img
      • fastboot flash --disable-verity --disable-verification vbmeta_system vbmeta_system.img
      • fastboot flash recovery recovery.img
    2. Use fastboot menus to reboot to recovery (new blue one)
    3. Press "Install update" -> "ADB Sideload"
    4. In command window: adb devices - ensure it says "sideload" and not "unauthorised"
    5. In command window: adb sideload copy-partitions-20210323_1922.zip
    6. Reboot recovery from menus on phone
    7. In command window: adb devices - ensure it says "sideload" and not unauthorised
    8. In command window: adb sideload Nameless-AOSP_kebab-12.1-20220723-1310-Official.zip
    9. Click back arrow in recovery, then click "Factory reset" -> "Format data/factory reset" -> "Format data"
    10. Click back arrow in recovery, then click "Reboot to system"
    If you miss a step and boot the phone it's likely not going to be stuffed. In this case, force it back to EDL mode (adb reboot edl) or hold the up + down volume buttons for ~40s and start with the MSM tool again.