[ROM][OFFICIAL][OP5/5T][10] RESURRECTION REMIX [24 JAN 2020]

Search This thread

Arokia

Senior Member
May 10, 2016
490
273
is it possible to make this build SELinux permissive? I read from the telegram channel that one cannot change said setting previously, because it breaks some stuff in the ROM.
If u want v4a and gcam to work together on enforcing. Yes it will. There is a v4a which works on enforcing and gcam also work along with it
 

picarito

Senior Member
Feb 10, 2012
516
144
can anyone confirm that when clicking on upper left side of screen touch is kinda wonky? like when going into an app that has the < back button and touch wont be recognized.tried touching that area on the multitouch test app and touch is not being recognized unless you touch somewhere else on screen and then touching that area.
 

d1n0x

Senior Member
Oct 4, 2010
3,996
1,764
can anyone confirm that when clicking on upper left side of screen touch is kinda wonky? like when going into an app that has the < back button and touch wont be recognized.tried touching that area on the multitouch test app and touch is not being recognized unless you touch somewhere else on screen and then touching that area.
Sounds like a hardware defect
 

sjamie

Senior Member
Aug 6, 2011
8,750
4,411
can anyone confirm that when clicking on upper left side of screen touch is kinda wonky? like when going into an app that has the < back button and touch wont be recognized.tried touching that area on the multitouch test app and touch is not being recognized unless you touch somewhere else on screen and then touching that area.
Yes, that also happened to me. Rebooting the phone fixed the issue. Haven't experienced it again (fingers crossed).
 

Dgonix

Senior Member
Aug 10, 2013
143
19
I will give my opinion on the latest build from September 21st. I installed it on a clean firmware, during these three days the smartphone just hung up three times just like that - the Google application with a swipe to the left does not work. Application icons on the desktop do not open at all. I just had to manually force the power button to restart. And yesterday, in general, the system just got up, the screen does not react to anything and the smartphone itself turned on and did not turn on. Then one more nuance. As you know, in RR Linux, the default is permissive, I did not install any modules, did nothing, but the fact is that Selinux itself is now permissive.
 

sjamie

Senior Member
Aug 6, 2011
8,750
4,411
Sometimes application icons on the desktop do not open at all. I just had to manually force the power button to restart. And yesterday, in general, the system just got up, the screen does not react to anything and the smartphone itself turned on and did not turn on.
I also experienced this behavior.
 

Ledrock

Senior Member
Sep 28, 2018
61
210
Bangalore
OnePlus 9 Pro
I will give my opinion on the latest build from September 21st. I installed it on a clean firmware, during these three days the smartphone just hung up three times just like that - the Google application with a swipe to the left does not work. Application icons on the desktop do not open at all. I just had to manually force the power button to restart. And yesterday, in general, the system just got up, the screen does not react to anything and the smartphone itself turned on and did not turn on. Then one more nuance. As you know, in RR Linux, the default is permissive, I did not install any modules, did nothing, but the fact is that Selinux itself is now permissive.

I have solved this issue in the next build. Sorry for the inconveniences caused😅
 

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    Please read this!!
    Finally the December update is here. Sorry for the delay. I had my exams going on and had a lot of stuff to do this time since I have shifted to a new device tree. OTA will arrive soon but don't use the updater! This update should run well with dirty flash, but please mind that you need to flash the latest firmware before the update as it needs 10.0.1 firmware. So please check the notes or download links for the required firmware and update the same. It would be amazing if you could clean flash the update. This will be the last Q update that ill provide for RR . VoWifi has issues currently and if possible ill try and release a hotfix version. If not ill fix it for the A11 version of RR which should arrive soon. Have a great week ahead. Cheers!!🍻

    Changelog:
    - New LOS 17.1 based tree
    - 10.0.1 blobs merged
    - Added alarm props from 10.0.1
    - Merged some fixes from Old tree
    - Added Zygote preforking
    - Added Snapcam overlays
    - Nuked unnecessary stuff from tree (LOS stuff)
    - Added new display settings from AOSIP
    - Added new LiveDisplay from LOS
    - Fixed Wakeup delay issue
    - Added December fp from Redfin
    - Added fixes for audio related issue
    - Added a lot of fixes and overlays
    - Added camera props from 10.0.1
    - Added new fingerprint blob
    - Fixed some more issues with RCS and updated to latest from AOSP
    - Removed a few unnecessary dependencies
    - Removed a few old props
    - Added autofill overlays back
    - Cleaned up some AOSP overlays cuz why not
    - Made a few changes to camera props
    - Changed a few audio props as we don't use them anymore (depreciated)
    - Cleaned up some blobs that weren't used anymore
    - Latest ims and telephony stuff from dipper
    - Added a lot of caf stuff
    - New sexy wallpaper set as default
    - Fixed some stability issues
    - Added VoLTE fixes
    - DC dimming min brightness set
    - Addressed some stupid denials with overlays
    - Made some changes to cheeseburger H/W key configs
    - Kernel stuff by Edrick(v.263 custom2 included)
    - Source side changes


    Notes:
    - Don't update through the updater app.
    - Firmware not included so please flash 10.0.1.
    - Try dirty flash and see if it works....if it doesn't then clean flash.
    - For people with dual sim cards, If at all you feel sim settings are lost please search for "sim" in the search bar to find it.
    - Flash 6.0 dotfix if needed.

    FIrmware:
    Cheeseburger:

    Dumping:
    4
    https%3A%2F%2Fimg.xda-cdn.com%2Frmi99HMuulDIBMylNPUyyG15CDA%3D%2Fhttps%253A%252F%252Fresurrectionremix.com%252Fassets%252Frrlogo.png
    Resurrection Remix Q

    Code:
     /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     *
     */

    https%3A%2F%2Fimg.xda-cdn.com%2FdyoDc5WfK3v9CJXUDQWPTvjKNZg%3D%2Fhttps%253A%252F%252Fresurrectionremix.com%252Fassets%252Frrabout.png


    Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
    combination of performance, customization, power and the most new features, brought directly to your Device.

    Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
    Special thanks to, the LineageOS team, Omni team , SlimRoms and of course to all the supporters.​


    https%3A%2F%2Fimg.xda-cdn.com%2FUyNovoKEoXLvaR1NKwFc3lBLe7M%3D%2Fhttps%253A%252F%252Fresurrectionremix.com%252Fassets%252Frrinstall.png


    Clean flash (RECOMMENDED IF COMING FROM ANOTHER ROM):
    INSTRUCTIONS

    Follow all the next instructions carefully

    Code:
    *Make sure you have the latest custom recovery installed(TWRP is the preferred recovery).
    *Download the latest Resurrection Remix Rom & the latest GApps package.
    *Boot into recovery.
    *Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution.
    *If you are coming from stock OS you may need to format internal storage
    *Flash ResurrectionRemix Rom.
    *Flash Google Apps package(Optional).
    *Flash Magisk Root(Optional).
    *First boot may take up to 5 minutes.

    -UPDATE INSTRUCTIONS-
    Now there are two ways to do this, Use the Updater app(recommended) or use TWRP to manually flash it
    For OTA
    Code:
    *Simply open the updates app through RR tools> updates
    *Check for new OTA if you havent already
    *Tap download button , and follow the instructions.
    *Let the updater do its thing


    OR
    To use the manual way

    Code:
    *Boot to recovery and make a backup
    *Flash RROS zip then reboot to TWRP
    *Flash  Magisk and reboot to system
    *Enjoy


    https%3A%2F%2Fresurrectionremix.com%2Fassets%2Frrdownload.png

    ROM Download



    (Nano Recommended)

    https%3A%2F%2Fresurrectionremix.com%2Fassets%2Frrsource.png
    https%3A%2F%2Fresurrectionremix.com%2Fassets%2Frrthanks.png

    XDA Developers
    LineageOs Team
    AICP
    Crdroid
    AOSIP
    DU
    Xtended
    Evolution X
    Bliss
    Omni Team
    Pixel Experience
    Lazy Kernel (@ederekun)
    And Of Course To All The Supporters, Donators And Users
    Join our Telegram channel : https://t.me/ResurrectionRemixChannel

    https%3A%2F%2Fresurrectionremix.com%2Fassets%2Frrbugs.png

    Download the Catlog app from the Play Store.
    There is also a donate version which you can purchase to show appreciation.
    After downloading the Catlog app, go to the app settings, and change the log level to Debug.
    Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
    Copy and paste the entire log either to Hastebin or Pastebin
    Save the log, and copy and paste the link into the thread with a brief description of the error.​



    XDA:DevDB Information
    Resurrection Remix, ROM for the OnePlus 5/ 5T, ROM for the OnePlus 5

    Contributors
    Ledrock, akhilnarang, varund7726, enesykaya, ederekun
    Source Code: https://github.com/ResurrectionRemix/

    ROM OS Version: Android 10
    ROM Kernel: Linux 4.x
    ROM Firmware Required: Already Included (OOS10.0.0 Hotfix)
    Based On: LOS

    Version Information
    Status: Stable
    Current Stable Version: 8.6.1
    Stable Release Date: 2020-09-21

    Created 2020-09-21
    Last Updated 2020-11-11
    4
    @Ledrock Thanks for providing a great rom for OP5/T but its been a while since you've updated the rom so is there any chance for this rom to get any updates or its EOL ?
    3
    [Forwarded from Resurrection Remix OnePlus 5/T]
    Resurrection Remix 8.6.7 is up. This will be the final update for Q (yes this time I am serious lol). Most of the bugs have been fixed. Hopefully you guys will have a stable experience. Have a great week ahead. Cheers🍻

    Changelog:
    - Fixed the sim card menu (thanks to @trautamaki )
    - Feb security patch
    - Kernel updated to 4.4.254
    - Added fixes for some weird UI glitches

    Notes:
    - OTA will arrive soon. People who are on previous versions ( <8.6.5 ) might need to clean flash to avoid possible issues. For others, you can update VIA the updater.
    - For guys who are flashing Lazy kernel, please flash the custom version of it.
    - Flash latest firmware if you are on older versions.
    - EOL build for Q. R sources are WIP and ill build as soon as they are out...

    FIrmware:
    Cheeseburger:

    Dumping:
    2
    mobile data isn't working on my oneplus 5 anymore, no 4G not even 3G when i tried to switch. my mobile carrier is IL Pelephone. it was working in december build.

    Edit: forgot to mention that VoLTE and Vowifi works fine, except mobile data
    search for "sim cards" in the search bar of settings and choose your sim as default data privider...