[ROM][OFFICIAL][R] LineageOS 18.1 for Xiaomi Mi 10T / Mi 10T Pro / Redmi K30S Ultra [apollo/apollopro]

Search This thread

BTW lover

Senior Member
Apr 27, 2010
99
16
Thank you for the quick reply, do you use the recommended firmware for this rom or any newer version?
 

wiz.wiz

Senior Member
Oct 29, 2013
245
26
Toulouse
www.tournoidesdieux.fr
Hi,
updated today to latest ROM (lineage-18.1-20220423-nightly-apollon-signed.zip), latest EEA FW (fw_apollo_miui_APOLLOEEAGlobal_V13.0.2.0.SJDEUXM_f939ac44da_12.0.zip) and latest NikGapps Core.
So far so good... voice over wifi and 4G calls still not active.
 

imjanjal

Member
Nov 11, 2021
7
0
Xiaomi Mi 10T / 10T Pro
2okPze5.png


LineageOS is a free, community built, aftermarket firmware distribution of Android 11.0 (R), which is designed to increase performance and reliability over stock Android for your device.

LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

Maintainers
- Ramisky
- SebaUbuntu

Recommended firmware
V12.1.3.0.RJDMIXM

Downloads
Here

Flashing instructions
Here

Sources
LineageOS

Happy modding!
Can we expect the release of lineageos 19 soon?
 

Zeljko991

Member
Apr 21, 2022
7
1
How to update from 18.1 to 19.1? Can we use recovery to flash firmware and then 19.1 rom? I use 3.6.1_11-RedmiK30SUltra_3.4_a12 twrp
 

wiz.wiz

Senior Member
Oct 29, 2013
245
26
Toulouse
www.tournoidesdieux.fr
so that means we won't have 18.1 releases anymore ?
about 19.1, does it have the puky 2 tiles per row configuration ? If so is it configurable to have much more tiles per row, as on previous releases ?
thanks
 

wiz.wiz

Senior Member
Oct 29, 2013
245
26
Toulouse
www.tournoidesdieux.fr
Hi, did someone try to connect to an IPv6 address ?
My home ISP did switch my IP to IPv6, I would like to access machines through their IP v6 address with juicessh.
I've activated the "ipv4/ipv6" on the APN of the phone but it does not seem to work. Anyone tested ?
Same, voIP and vowifi never worked with LOS for me.
 

ohasanov

New member
Apr 29, 2022
4
0
I have been using this Rom for a while, all looking good except one thing... Video stabilization. Eis doesn't seem to wanna work no matter what I do. The gcam camera stream config show the classic miui stabilized stream and the Preview is stabilized too. But when I try to record something the output video is never stabilized, which is a shame considering I take a lot of videos... I tried installing anx camera 185R but sadly the camera preview was blank and it didn't work...
 

guitarbite

Senior Member
Hi all, I'm on Arrow ROM and would love to switch to this but has its own recovery(arrow). With that being said, could someone recommend what I would need to do to switch to Lineage please? Main reason for me switching is I'm having massive battery drain from "Android System"...
 

Attachments

  • Screenshot_20220519-125127_Settings_1.png
    Screenshot_20220519-125127_Settings_1.png
    352 KB · Views: 30

Zeljko991

Member
Apr 21, 2022
7
1
Hi all, I'm on Arrow ROM and would love to switch to this but has its own recovery(arrow). With that being said, could someone recommend what I would need to do to switch to Lineage please? Main reason for me switching is I'm having massive battery drain from "Android System"...
I used skkk twrp, and just flashed LineageOS with it. But before flashing, I formated data, cache, everything. Also, dont forget to flash gapps after flashing rom before booting in system. Also, there are instructions to flash using adb sideload, you can find it on yt
 

Top Liked Posts

  • There are no posts matching your filters.
  • 30
    2okPze5.png


    LineageOS is a free, community built, aftermarket firmware distribution of Android 11.0 (R), which is designed to increase performance and reliability over stock Android for your device.

    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    Maintainers
    - Ramisky
    - SebaUbuntu

    Recommended firmware
    V12.1.3.0.RJDMIXM

    Downloads
    Here

    Flashing instructions
    Here

    Sources
    LineageOS

    Happy modding!
    8
    prosby přidat game turbo a herní centrum :)
    can't you write in English ?
    If everyone uses its native language it is going to be a huge mess...
    5
    Hello. Running the latest build on my Mi 10T Pro and everything is smooth as heck. Way better than any custom ROM I've tried and even better than Xiaomi.EU.
    But my only issue with it is that in the Play Store > Settings > About > Play Protect certification, it's listed as "Device is not certified". Because of this, I can't download some of my banking apps via the Play Store and some other apps. I don't want to sideload APKs. I contacted Play Store support about it and they couldn't help me. My Google Services Framework Android ID has already been registered so I should be certified.
    Do yours indicate the same and how have you been able to resolve this? Much help would be appreciated. Thanks.View attachment 5362653
    This basically means your device currently doesn't pass safetynet.

    Fortunately this is quite easy to fix. Follow these steps:
    1. FIrst of all you need to root using Magisk.
    2. Then you need to install Magisk module "Universal SafetyNet Fix" and "MagiskHide Props Config".
    3. Install any Terminal of your choice from the Google Play store.
    4. Open Terminal, type "su" (without quotes), grant SuperUser permissions.
    5. Type "props" (again without quotes), select "1 - Edit device fingerprint".
    6. Select "f - Pick a certified fingerprint".
    7. Select "30 - Xiaomi"
    8. Select either "27 or 30" (which is either 10t or 10t pro).

    Follow the onscreen instructions then reboot, make sure that google play services is currently checked in Magisk hide and you should be golden.

    Enjoy!
    4
    Already tried it and it still was only at 90hz show me a screenshot or get outta my posts
    Quit it. You're just embarrassing yourself. At least have some decency. There was absolutely no need for you to be rude especially not randomly 😂
    Screenshot_20210726-204109_Settings.png
    4
    And obviously I wouldn't use force 90hz you sound so dumb and take me for a fool?
    And yet it works just fine for all of us but you.. :LOL: