• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][OFFICIAL][R] LineageOS 18.1 for Xiaomi Mi 10T / Mi 10T Pro / Redmi K30S Ultra [apollo/apollopro]

Search This thread

TheJags

Senior Member
Nov 16, 2017
61
5
In have:

MagiskHide Props Config v5.4.0
by Didgeridoohan @ XDA Developers

=====================================
Edit device fingerprint (active)
=====================================

Change boot stage for the device fingerprint
or security patch date props.

Pick an option below.

1 - Device fingerprint (default).
2 - Security patch date (late_start service).
b - Go back e - Exit
Thank you so much.

As suggested by tiktakt0w, I turned on / enabled MagiskHide, reapplied fingerprint, and finally I can see "Device is certified" :)
 

whatsek

Senior Member
Nov 5, 2009
275
80
Lots of kernel changes are coming tomorrow, and we can switch to global firmware V12.5.1.0.RJDMIXM

 

wiz.wiz

Senior Member
Oct 29, 2013
218
24
Toulouse
www.tournoidesdieux.fr
Lots of kernel changes are coming tomorrow, and we can switch to global firmware V12.5.1.0.RJDMIXM

do you deactivate protection (fingerprint/code..) before updating ?
do you uninstall/disable magisk modules ?
are you using twrp or lineage recovery ?
 

whatsek

Senior Member
Nov 5, 2009
275
80
do you deactivate protection (fingerprint/code..) before updating ?
do you uninstall/disable magisk modules ?
are you using twrp or lineage recovery ?
I use TWRP, I do not deactivate fingerprint or patern. I do not deactivate the only module in magisk that I use: Hide props config. (Flashed this way from the first release, no problems encountered)
 
  • Like
Reactions: wiz.wiz
Lots of kernel changes are coming tomorrow, and we can switch to global firmware V12.5.1.0.RJDMIXM

Hopefully this fixes the microstuttering while scrolling. Fingers crossed!
 
  • Like
Reactions: oscarfc

wiz.wiz

Senior Member
Oct 29, 2013
218
24
Toulouse
www.tournoidesdieux.fr
Lots of kernel changes are coming tomorrow, and we can switch to global firmware V12.5.1.0.RJDMIXM

they have removed the july 24rth release. Maybe it was buggy ?
I am still on july 10th release. I am assuming I can directly upgrade to july 31st (with FW 12.5.1.0 also)
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    i have one question. i can't figure out if it is possible to utilize all camera lenses (especially wile angle) without use of GCam mod? Regardless of picture quality, can wide angle shouts be made with stock camera?
    You cannot, by a deliberate design. See https://www.reddit.com/r/LineageOS/comments/p8u3zt
    1
    i've checked Open Camera, definitely, it doen't detect multiple sensors. Checked also our build.prop, i can't find this "vendor.camera.aux.packagelist" property.
    This property is included in the vendor partition (not system) for this ROM. By the way, it seems better to use https://forum.xda-developers.com/t/...safetynet-prop-edits-and-more-v6-1-0.3789228/ to perform a systemless modification. After adding Open Camera to that list, you should be able to see some other cameras but there is still a bug of Open Camera which would lead to crash if you switch to an invalid ID: https://sourceforge.net/p/opencamera/tickets/872/
    1
    please help, I want to install anxcamera to LOS ROM but codename in LOS is "apollon" not "apollo" when i install anxcamera app show error massage "Can't connect camera" and force close

    Can I rename codename "apollon" to "apollo"

    thank you
    You can. Might break OTA but who cares about it anyway. Btw, ANX is so bad and I dont even recommend the hassle to install it, just use Gcam and the default camera
    1
    Just to update everyone here. I wanted to tweak my phone a bit + update to the latest LineageOS so i did things step by step.

    1) Changed my recovery to TWRP (https://forum.xda-developers.com/t/...r-mi-10t-mi-10t-pro-redmi-k30s-ultra.4319809/) instead of the Lineage Recovery - No issue, just that decrypting is slow...

    2) Updated my firmware to the latest V12.5.4.0.RJDMIXM - After booting into the system, i keep getting connection drops, video lags, whole phone keeps hanging every now and then.

    3) Updated to the latest Lineage OS 9 October - everything smooth sailing, no lags no hanging no crashing no random reboots. Have been using it the past 3 days. Except for "MAYBE" increased battery drain by a bit... But most likely because i've been playing a new game... I guess.
  • 26
    2okPze5.png


    LineageOS is a free, community built, aftermarket firmware distribution of Android 11.0 (R), which is designed to increase performance and reliability over stock Android for your device.

    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    Maintainers
    - Ramisky
    - SebaUbuntu

    Recommended firmware
    V12.1.3.0.RJDMIXM

    Downloads
    Here

    Flashing instructions
    Here

    Sources
    LineageOS

    Happy modding!
    8
    prosby přidat game turbo a herní centrum :)
    can't you write in English ?
    If everyone uses its native language it is going to be a huge mess...
    5
    Hello. Running the latest build on my Mi 10T Pro and everything is smooth as heck. Way better than any custom ROM I've tried and even better than Xiaomi.EU.
    But my only issue with it is that in the Play Store > Settings > About > Play Protect certification, it's listed as "Device is not certified". Because of this, I can't download some of my banking apps via the Play Store and some other apps. I don't want to sideload APKs. I contacted Play Store support about it and they couldn't help me. My Google Services Framework Android ID has already been registered so I should be certified.
    Do yours indicate the same and how have you been able to resolve this? Much help would be appreciated. Thanks.View attachment 5362653
    This basically means your device currently doesn't pass safetynet.

    Fortunately this is quite easy to fix. Follow these steps:
    1. FIrst of all you need to root using Magisk.
    2. Then you need to install Magisk module "Universal SafetyNet Fix" and "MagiskHide Props Config".
    3. Install any Terminal of your choice from the Google Play store.
    4. Open Terminal, type "su" (without quotes), grant SuperUser permissions.
    5. Type "props" (again without quotes), select "1 - Edit device fingerprint".
    6. Select "f - Pick a certified fingerprint".
    7. Select "30 - Xiaomi"
    8. Select either "27 or 30" (which is either 10t or 10t pro).

    Follow the onscreen instructions then reboot, make sure that google play services is currently checked in Magisk hide and you should be golden.

    Enjoy!
    4
    Already tried it and it still was only at 90hz show me a screenshot or get outta my posts
    Quit it. You're just embarrassing yourself. At least have some decency. There was absolutely no need for you to be rude especially not randomly 😂
    Screenshot_20210726-204109_Settings.png
    4
    And obviously I wouldn't use force 90hz you sound so dumb and take me for a fool?
    And yet it works just fine for all of us but you.. :LOL: