Development [ROM][OFFICIAL][sake][12L] StatiXOS v5.2

Search This thread

dar12ek

Member
Dec 2, 2014
26
6
Screenshot_20220626-215240.png
 

zenaufa

Senior Member
May 9, 2011
119
44
Jakarta
Whenever i tried to login into whatsapp, i got this error.

Is anyone face this issue as well? and is there's any fix for it?
 

Attachments

  • Screenshot_20220627-164435.png
    Screenshot_20220627-164435.png
    176.8 KB · Views: 55

Androbots

Recognized Developer
Dec 8, 2014
977
716
sourajitk.github.io

Attachments

  • -210167_temp.jpg
    -210167_temp.jpg
    82.1 KB · Views: 53

sirkuttin

Senior Member
Jun 7, 2011
64
21
ASUS ZenFone 8
I just did my first install of this rom.

Fresh install of required stock firmware​

  1. download and extract this stock firmware
  2. Bash:
    adb reboot bootloader
  3. go into the extracted folder and run the update_image script
  4. download this ota update to get to the required firmware version
  5. put this ota zip on your phone in the root directory
  6. unplug your phone from your computer and a notification appears to install the update. do this

Install statixos rom​

  1. Download latest statixos rom (the newest zip in this folder) we will be sideloading this later
  2. Download the latest statixos fastbootimage zip and extract it (we will use this for fastboot flashing)
  3. from the extracted fastboot zip, we need to flash the boot.img and vendor_boot.img
  4. Bash:
    adb reboot bootloader
    fastboot flash vendor_boot vendor_boot.img
    fastboot flash boot boot.img
    fastboot reboot fastboot
  5. From the new bootloader interface lets install the statixos rom zip
    1. perform factory reset
    2. go into recovery mode
    3. select the option to install update from adb
    4. Bash:
      adb sideload <the_newest_staixos_rom>.zip
    5. reboot
 
Last edited:

sirkuttin

Senior Member
Jun 7, 2011
64
21
ASUS ZenFone 8
Thank you for this rom. I'd love the ability to make the 3 button navigation bar have more buttons. Ideally I want a button to toggle the notification shade down and up. Would also be interesting as a swipe down gesture for gesture navigation.

Edit: I see that enabling one handed mode allows a swipe down gesture to pull down the statusbar!
 
Last edited:

skothiya

Senior Member
May 5, 2014
76
7
ASUS ZenFone 8
I just did my first install of this rom.

Fresh install of required stock firmware​

  1. download and extract this stock firmware
  2. Bash:
    adb reboot bootloader
  3. go into the extracted folder and run the update_image script
  4. download this ota update to get to the required firmware version
  5. put this ota zip on your phone in the root directory
  6. unplug your phone from your computer and a notification appears to install the update. do this

Install statixos rom​

  1. Download latest statixos rom (the newest zip in this folder)
  2. extract the boot.img and vendor_boot.img files from this rom zip
  3. Bash:
    adb reboot bootloader
    fastboot flash vendor_boot vendor_boot.img
    fastboot flash boot boot.img
    fastboot reboot fastboot
  4. From the new bootloader interface
    1. perform factory reset
    2. go into recovery mode
    3. select the option to install update from adb
    4. Bash:
      adb sideload <the_newest_staixos_rom>.zip
    5. reboot
Should i flash boot.image that extracted from zip or recovery boot image?
 

sirkuttin

Senior Member
Jun 7, 2011
64
21
ASUS ZenFone 8
Okay
Then should i have to flash recovery image that given in recoveryimage folder to sideload zip?
Someone writes in this post to flash recovery file.
Than sideload zip.
I am bit confused about it.
I've updated my directions. my steps were not clear and was missing some needed detail. hope that helps.

we actually need to download both the rom zip and the fastbootimage zip. let me know if you have any more questions.
 

skothiya

Senior Member
May 5, 2014
76
7
ASUS ZenFone 8
I've updated my directions. my steps were not clear and was missing some needed detail. hope that helps.

we actually need to download both the rom zip and the fastbootimage zip. let me know if you have any more questions.
Thank you for help
I have installed rom successfuly.
Just one question can i directly update the rom from system updater?
 

DaemonDant

Member
Sep 24, 2020
10
2
Been using this ROM for a while now and I gotta say, this is by far one of the best custom ROMs I've used. Fluid, fast, looks fantastic, and has great battery life.

My only gripe is flashing Magisk.zip from recovery does not work. I have to extract the current boot image, patch it via the magisk app on my device, and then flash the patched image via my PC. It's kind of a pain after every OTA to do this process just to keep root privileges.

Also on the topic of the online updater, I've noticed that after installing an update the OTA updater will still show and allow the download and installation the current build.

Aside from this, I will continue to run this as my daily driver (just will have to hold off OTA updates until I'm at my PC to keep root).

Thanks again for maintaining this ROM!
~Dant
 

saxmydix

Senior Member
Oct 11, 2011
374
246
Selayang
Been using this ROM for a while now and I gotta say, this is by far one of the best custom ROMs I've used. Fluid, fast, looks fantastic, and has great battery life.

My only gripe is flashing Magisk.zip from recovery does not work. I have to extract the current boot image, patch it via the magisk app on my device, and then flash the patched image via my PC. It's kind of a pain after every OTA to do this process just to keep root privileges.

Also on the topic of the online updater, I've noticed that after installing an update the OTA updater will still show and allow the download and installation the current build.

Aside from this, I will continue to run this as my daily driver (just will have to hold off OTA updates until I'm at my PC to keep root).

Thanks again for maintaining this ROM!
~Dant
What i do for every OTA update, download update from updater, after finish install OTA, don't reboot yet, from the magisk app, install to Inactive Slot. Then reboot. Profit.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    very promising rom, thank You @Androbots !

    edit:
    been using for a while. FOD unlocking is basically the same as in latest LOS build, which means i sometimes cannot unlock with my registered finger but i have no struggle unlocking with unregistered finger. opinion difference here is either about placebo or hardware batch (my zf8 is about 18months old, made in china). double tap to wake is as unreliable as LOS. performance wise it's about the same – at least in real day to day usage (never used benchmark in my life). this rom is somewhat prettier, but lacks few nice options that LOS has. in a matter of sys configuration it's down to personal preferences, but i lean slightly towards LOS. camera pictures are better with statix comparing to LOS, plus statix has asus camera included which might be nice touch to some. this brings me to conclusion that it's time to get rid of this phone and get one with fingerprint reader outside display (miss gestures too).

    ps. i wasn't able to sideload with adb delivered in ubuntu 20.04. rolling release distro was able to do it however.

    @randman2011 haven't noticed too quited volume with loudspeaker call.
    1
    Thank you for letting me test this one! i'm hyped for Android 13 :D
  • 21

    stx-2021.png


    StatiXOS for ASUS ZenFone 8 (sake)


    What is StatiXOS?

    StatiXOS is a custom ROM based on the Android Open Source Project aiming to be minimal while providing quality of life improvements and up to date security patches.


    You tell me!


    Flashing the fastbootimage
    1. Download the fastbootimage from our download link above
    2. Reboot your ZenFone 8 to bootloader and plug it in to your computer
    3. Now open up your Terminal (macOS and Linux) or Command Prompt (Windows)
    4. Type in fastboot reboot fastboot

    5. Now locate the downloaded ROM zip and drag it into the shell window you opened in step 3 after typing fastboot update.
    5. From here on, it will be automated. Once the device reboots, you're good to go!

    Flashing an OTA package
    1. Download the ROM which should be in the root of the sake folder.
    2. Navigate to boot images within the sake folder and download the two images boot.img and vendor_boot.img.
    3. Reboot your device to its bootloader mode, open up a terminal window and flash boot and vendor_boot using fastboot flash.
    4. Once done, type in fastboot reboot recovery.
    5. once you boot to recovery, tap on “Apply from ADB”
    6. Now on your PC, type in adb sideload and drag the zip you downloaded in Step 1.
    7. Wait for it to complete flashing. Once done, wipe data/cache (don’t if you’re dirty flashing)
    8. Done!



    Prerequisite firmware: 31.1010.0410.72
    Android version: 12.1.0
    Linux Kernel Version: 5.4.180
    Source code: GitHub
    Code Review: Gerrit
    8
    Fine tuning some stuff right now. Things are coming along nicely so far.

    Hint: Check for that lock screen weather
    8
    And there we go.

    Jan builds are here!

    Device changelog:
    - Rebase device-specific sources for official Android 12 source drop: we now run the latest stock blobs and kernel.
    - Silence a whole lot of DEBUG driver spam and stop use of TRACE_PRINTK.
    - Use UDFPS instead of Lineage's FOD implementation with a slight caveat and, in my opinion, a big quirk: High brightness mode doesn't exactly work. So, you have to make sure the screen brightness is set to more than 40% at least to use UDFPS properly. However, since HBM doesn't work, there is absolutely zero flicker.
    - This build has SELinux enforced. Expect OEM-like signed -user builds once we roll out OFFICIALs.

    Note: You must be on 31.1004.0404.81 to flash and use this.

    Source changelog:
    - Our new color scheme (notice the quick settings)
    - Tons of under the hood optimization
    - Use our new GMS
    - Bring back system wide icon packs! (Remember them in ThemePicker on Android 11?)
    - Implement a ton of Pixel specific stuff as modular overrides to AOSP

    Download: https://downloads.statixos.com/12-SNOWCONE/sake/fastbootimages/statix_sake-SNOWCONE-20220123.zip

    Enjoy! :)
    8
    New update!

    - Night Light, Extra Dim now work!
    - Screen colors should be a LOT pleasing to the eye now.
    - Headphone jack now works.
    - Check Settings -> Gestures for some new stuff
    - Added battery styles.
    - You will now pass safetynet and be play store certified :)
    - People moving from stock should have a better time flashing this now.
    - Still working on improving haptics and UDFPS. Will take time so patience requested.

    Download: https://downloads.statixos.com/12-SNOWCONE/sake/fastbootimages/statix_sake-SNOWCONE-20220201.zip

    1643771343076.jpeg
    8
    New update:

    - Update Adreno drivers (anything that uses 3D acceleration should actually see some improvement)
    - Haptics now work like they do on stock. Nice and tight.

    Download: https://downloads.statixos.com/12-SNOWCONE/sake/fastbootimages/statix_sake-SNOWCONE-20220227.zip