Development [ROM] [OFFICIAL] [ TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst]

[asukav]

This ROM is for TB-716F, the Chinese version (not Global).

for @mardon85 @trojaner_80 @sakun-ice and all friends in this section.

Since lolinet uploaded the same package, mine from onedrive is deleted (to save some storage).

lolinet mirrors - firmware, software, iso etc.

lolinet mirrors - powered by h5ai

mirrors.lolinet.com

BTW, I'm using TB-606F, and I'm living in China. So if you want any Chinese version ROM, pls let me know.

Other roms, I mean the Global ones, you can get them from lolinet.

 

[sakun-ice]

This ROM is for TB-716F, the Chinese version (not Global).

for @mardon85 @trojaner_80 @sakun-ice and all friends in this section.

TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst.zip

Compressed (zipped) Folder

1drv.ms

Pls get me noticed if the link is invalid.

BTW, I'm using TB-606F, and I'm living in China. So if you want any Chinese version ROM, pls let me know.

You are amazing! This rom is flasheable with qualcomm program right?

 

[asukav]

You are amazing! This rom is flasheable with qualcomm program right?

If you are talking about QFIL, then yes. Just pay attention to the steps (copied from another post) :

turn tablet off, disconnect to PC, open Qfil, press down the "volume +" buttom (do not release) and connect to pc (release till Qfil shows "Qualcomm HS-USB QDLoader 9008(comx)").

A. Qfil-Configuration-FireHoseConfiguration:
1. device type: ufs
2. Reset After Download: check

B. the main window:
load content: the contents.xml file

then press download content and wait till it boots.

 

[rgeon]

I tried to flash this rom step by step according to your instructions. Unfortunately I get the following error message: Sahara protocol failed

 

[asukav]

I tried to flash this rom step by step according to your instructions. Unfortunately I get the following error message: Sahara protocol failed

I'm sorry for this but I checked through Google, it's said some reasons could cause this error.

I think the ones below should be one of the causes:

1. QFIL version is old. I'm using 2.0.2.3, but there's newer versions.

2. USB cable should be the original one from the box not a random one.

3. when QFIL settings are all ready, press vol+ then connect to PC (do not connect to pc too early), then confirm QFIL shows "Qualcomm HS-USB QDLoader 9008(comx)". And please keep USB connecting to PC till your pad boot to normal.

4. before flashing, pls make sure the qualcomm driver is correctly installed (in case of the windows driver signature check restriction).

Hope everything be fine. Good luck!

 

[rgeon]

Hi Guys, this video fixed my problem:

Now i have flashed stock rom

 

[trojaner_80]

This ROM is for TB-716F, the Chinese version (not Global).

for @mardon85 @trojaner_80 @sakun-ice and all friends in this section.

TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst.zip

Compressed (zipped) Folder

1drv.ms

Pls get me noticed if the link is invalid.

BTW, I'm using TB-606F, and I'm living in China. So if you want any Chinese version ROM, pls let me know.

Other roms, I mean the Global ones, you can get them from lolinet.

@asuka: 1000 Thanks to you! You are the best!!
I will try to flash the stock ROM tomorrow.

 

[trojaner_80]

Hi Guys, this video fixed my problem:

Now i have flashed stock rom

I received the same error message: Download Fail:Sahara Fail:QSaharaServer Failrocess fail

My Qfil-Configuration-FireHoseConfiguration:
device type: ufs
Reset After Download: check

Which elf-file have you selected in field programmer? prog_firehose_ddr.elf or prog_firehose_lite.elf
Have you selected the contents.xml file in the field flash build?

 

[trojaner_80]

I think I destroyed my Tablet today . I selcted the file rawprogram_unsparse0.xml. the Download Succeed and afterwards the Tablet shows the Lenovo Logo after start for mor than 10 minutes. It seems the chineses ROM has not been installed and the previous ROM has been deleted. Now I can access only bootload and adb shows
my Tablet in List of devices as unauthorized. Also a boot in EDL mode by pressing Volume + and Power is not possible anymore. I would be really thankful, if anybody has an advice for me, what I can do now.

 

[trojaner_80]

Hello. Now I was able to flash the chinese Rom on my Tablet, but WLAN does not work. I´m not able to activate WLAN. Does anybody else has the same problem?

 

[sakun-ice]

Hello. Now I was able to flash the chinese Rom on my Tablet, but WLAN does not work. I´m not able to activate WLAN. Does anybody else has the same problem?

I read something about that. They have to change the region of the tablet to Hong Kong.
How have you recovered the rom?

 

[mardon85]

Hello. Now I was able to flash the chinese Rom on my Tablet, but WLAN does not work. I´m not able to activate WLAN. Does anybody else has the same problem?

I had this issue its the wireless band of your router. I had to set my router to Hong Kong band to get on the 5ghz band.

 

[fabricioss1980]

I was able to install this rom, but now I have an issue with the OTA. Was anyone able to apply the update 12.6.238 ST 8.27MB? Mine keeps me prompting to re-install the same version after reboot. I've tried many times.

By the way, I had hope I would get widevine L1 after installing the rom 210730, but that didn't happen .

 

[fabricioss1980]

Was anyone able to get widevine L1 after flashing this ROM?

 

[NHQ Thang]

Great work sir,
Does it have any other language or just only English and China?

 

[y2k]

Was anyone able to get widevine L1 after flashing this ROM?

Firstly, you have to factory reset the CN rom you just installed, otherwise your device will get bricked. Then you relock the bootloader with fastboot command "fastboot flashing lock". You will get widevine L1 back.

 

[trojaner_80]

Is there an opportunity to unbrick the Tablet?

 

[park ys]

@asukav
hello sir.
Do you have cn 12.6.084 rom? Or zui12.5 or higher (android 11) the most recent cn rom..
i need lastest cn rom..
Is it possible to get the rom?

 

[dodgesme]

This ROM is for TB-716F, the Chinese version (not Global).

for @mardon85 @trojaner_80 @sakun-ice and all friends in this section.

TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst.zip

Compressed (zipped) Folder

1drv.ms

Pls get me noticed if the link is invalid.

BTW, I'm using TB-606F, and I'm living in China. So if you want any Chinese version ROM, pls let me know.

Other roms, I mean the Global ones, you can get them from lolinet.

can i get the latest version of chinese rom of Tb-606f?

 

[asukav]

Sorry guys. Thiese roms are what I can find in chinese forums.

Since they can be upgraded (Mine is 606, and OTAs are all right, so I guess other models can be) through OTA, it seems no need to get the latest.

But if there appears any, I'll upload them.

It's National Day Holiday, 7 days starting from Oct. 1. I won't be online for long.

And I'm still trying to figure out how to flash the latest Global on 606 CN Ver.

The hardware incompatible error sucks. F you, Lenovo.