[ROM][OFFICIAL][TREBLE][X72X][10.0.X] LineageOS 17.1 for LeEco Le Pro3

[mosimchah]

LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.

#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/

SUPPORTED DEVICES
- LEX720 (ZL1_CN)
- LEX722 (ZL0_CN)
- LEX727 (ZL1_NA)

3rd PARTY ADDONS/MODS
While we have no issues with people using supersu/magisk/xposed/custom kernels/etc, we can't provide support for users who have them installed.
This thread is not the right place to discuss about mods/addons.


HOW TO INSTALL LINEAGEOS
- Make sure your phone is running firmware from at least 20S
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Unlock bootloader and install TWRP 3.2.3 or higher.
- Boot into TWRP.
- Perform a backup of your current ROM. (Optional)
- RECOMMENDED: Do a factory reset! No support if you didn't!
- Flash LineageOS.
- Optional: Install the Google Apps addon package. (see Downloads)
- Reboot


HOW TO UPDATE LINEAGEOS
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Flash LineageOS.
- Reboot

DOWNLOADS
LineageOS 17.1: https://download.lineageos.org/zl1

You can see the changes for each release here: https://download.lineageos.org/zl1/changes/

Migration-Tools: https://androidfilehost.com/?w=files&flid=254680 (Unofficial->Official, Official->Unofficial)
Google Apps: http://opengapps.org/ (I recommend nano)
TWRP:

[RECOVERY][OFFICIAL] TWRP for the leeco le pro3 (x727,x720,x722,zl1,zl0)

#include /* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns...

forum.xda-developers.com

Firmware: https://sourceforge.net/projects/lineageos-on-leeco/files/firmware/

Contributors:
codeworkx,
jabashque
ThE_MarD,
mosimchah
andr68rus,
infrag,
darkobas,
jrior001,
And many more

DEVELOPER RESOURCES
https://github.com/lineageos/android_device_leeco_msm8996-common
https://github.com/lineageos/android_device_leeco_zl1
https://github.com/lineageos/android_kernel_leeco_msm8996/tree/lineage-17.1


HOW TO CONTRIBUTE?
Send your patches up for review: https://review.lineageos.org/

 

[mosimchah]

reserved

 

[mosimchah]

reserved.

 

[ZenitoSS]

Thanks for beta release! Now I test it.

 

[famewolf]

@mosimchah Will the update from within settings work on your version or require manual upgrades each time? What advantages does the 30s firmware give over the 20s firmware?

 

[mosimchah]

@mosimchah Will the update from within settings work on your version or require manual upgrades each time? What advantages does the 30s firmware give over the 20s firmware?

The OTA update option will only work once we have official builds, until then you'll have to update manually, as for the firmware, there isn't any real difference between 20s and 30s so if you're already on 20s there isn't any need to upgrade

 

[Daniel Doughlas]

There is a problem with lineageOS, the battery percentage, when you restart the device or when it is charging off does not show the correct percentage, this has already been fixed in the last AICP and AOSIP, could you fix it in the lineage? Thanks for the excellent ROM, for now I'm using lineage + BS kernel 7.0 to fix this

 

[ZenitoSS]

Ambient Display function not working for me.

 

[realist123]

I'm amazed that you guys are still working on this device.
Just wiped LOS16 and installed this build. Things are much smoother, but admittedly my LOS16 hadn't been wiped in over a year so was running rather sluggish.

The only issue I've had is that pixel launcher crashes, but Trebuchet seems to be pretty much the same now.

If only fingerprint worked it would be perfect

 

[tanuse]

The Rom has everything to take off at the level of users, it works well and with further developments it could become perfect, but without solving the problem FP will never have the success it deserves.

 

[marcash]

i have it on 2 devices installed and so far it works good

how often do we get update?

---------- Post added at 11:11 AM ---------- Previous post was at 11:11 AM ----------

i have it on 2 devices installed and so far it works good

how often do we get update?

 

[Sony make.believe]

i have it on 2 devices installed and so far it works good

how often do we get update?

It isn't even official, so there is no update routine.

First, all bugs needs to be solved (Fingerprint as example), then it's possible to make it official.

And even then, mosimchah will propably continue to develope and maintain AICP, instead of LOS.

 

[mosimchah]

FINGERPRINT FIXED
New build,
Changes:
1. The fingerprint is now fixed, huge thanks to jabashque for decompiling our fingerprint blobs and working with javelinanddart to figure out the issue and the fix
2. Tons of updates and fixes
3. Added the battery percentage fix from my aicp builds

Download:
https://drive.google.com/open?id=1HmxrJN90zVzM7PLE9g9Y-b73FyTPH4cD
mirror:
https://host.llamasweet.tech/mosimchah/zl1/lineage/17/lineage-17.1-20200303-UNOFFICIAL-zl1.zip
md5:
https://drive.google.com/open?id=1RO6CpzKdfI2h4i7zXUZRnblOFmiY9ETy
mirror:
https://host.llamasweet.tech/mosimc...neage-17.1-20200303-UNOFFICIAL-zl1.zip.md5sum

 

[ossizwei]

Did a clean install with newest opengapps. All things worked well. After this I installed Magisk and banking app. After reboot rom is working well too. No problem with FP. German banking app and phototan app works with Magisk hide. All the other apps I need working well too.
So thank you very much for this great work.
I changed from AICP to LineageOS because I have LineageOS on my tablet. So its easier for my wife. No different icons and systems

FINGERPRINT FIXED
New build,
Changes:
1. The fingerprint is now fixed, huge thanks to jabashque for decompiling our fingerprint blobs and working with javelinanddart to figure out the issue and the fix
2. Tons of updates and fixes
3. Added the battery percentage fix from my aicp builds

Download:
https://drive.google.com/open?id=1HmxrJN90zVzM7PLE9g9Y-b73FyTPH4cD
mirror:
https://host.llamasweet.tech/mosimchah/zl1/lineage/17/lineage-17.1-20200303-UNOFFICIAL-zl1.zip
md5:
https://drive.google.com/open?id=1RO6CpzKdfI2h4i7zXUZRnblOFmiY9ETy
mirror:
https://host.llamasweet.tech/mosimc...neage-17.1-20200303-UNOFFICIAL-zl1.zip.md5sum

 

[Daniel Doughlas]

Thank you for your hard work, I have two questions the first is whether OTA will work when the official ones are launched, whether it will arrive via OTA or is it broken in this Unofficial? and the second I can migrate from this unofficial to the official one using the migration zip without any problem?

 

[mosimchah]

Thank you for your hard work, I have two questions the first is whether OTA will work when the official ones are launched, whether it will arrive via OTA or is it broken in this Unofficial? and the second I can migrate from this unofficial to the official one using the migration zip without any problem?

I don't know if the ota will work from the unofficial build, but yes you should be able to flash it by using the migration zip

 

[realist123]

Thanks for the update!

Flashed and fingerprint works (mostly) great.

I am having some issues with the radio on this build. The phone sometimes drops 4G and does not want to reconnect. Or it sits in 3G for a while and refuses to move up into 4G.

 

[mosimchah]

Thanks for the update!

Flashed and fingerprint works (mostly) great.

I am having some issues with the radio on this build. The phone sometimes drops 4G and does not want to reconnect. Or it sits in 3G for a while and refuses to move up into 4G.

Make sure you're using the right apn settings for your carrier

 

[realist123]

Make sure you're using the right apn settings for your carrier

Yep, that was it!

 

[thorsen83]

I'm experiencing some problems regarding the alarm. Whereas it sounds when the device its active, when it is suspended it manages to activate the screen but doesn't make any sound. Any idea?