[ROM][Official][Weekly] LineageOS 14.1 for OnePlus 3/3T

Search This thread

CyberCROC

Member
Aug 10, 2007
31
0
I hope you guys can help.

I started with the latest unofficial LineageOS version (20/01/2017). I downloaded the nighlty from the website.
I flashed it using TWRP 3.0.4.0 but got an error that it can not be installed over incompatible data.

I performed a factory reset. Reinstalled the zip. This time it worked and it ends with the message:
Patching firmware images...
script succeeded: result was [1.000000]
Updating partition details...
...done

I did another Davik+Cache wipe.

When I reboot to system I immediately end up in TWRP again.

I already tried to reinstall the previous LineageOS version but I get the same result.

As my phone is no longer usable at the moment any help would be greatly appreciated
 
Last edited:

takumintchan

Senior Member
Oct 23, 2016
65
24
Yokohama
takumintdev.blogspot.jp
I hope you guys can help.

I started with the latest unofficial LineageOS version (20/01/2017). I downloaded the nighlty from the website.
I flashed it using TWRP 3.0.4.0 but got an error that it can not be installed over incompatible data.

I performed a factory reset. Reinstalled the zip. This time it worked and it ends with the message:
Patching firmware images...
script succeeded: result was [1.000000]
Updating partition details...
...done

I did another Davik+Cache wipe.

When I reboot to system I immediately end up in TWRP again.

I already tried to reinstall the previous LineageOS version but I get the same result.

As my phone is no longer usable at the moment any help would be greatly appreciated

Try reboot from terminal
 

thwrldbyjw

Senior Member
Jul 11, 2016
86
3
Tel Aviv
every update its getting worse and worse.

clean flash, first exp, restart, and nightly.

no messenger calling, no viber calling, no theme, horrible battery, no weather, poor voice calling.

oh and also had to flash again the twrp.
 
Last edited:

simmeone

Senior Member
Dec 3, 2010
218
30
Which TWRP is recommended for first official LAOS build? Official oder Dianlujitos TWRP?

every update its getting worse and worse.

clean flash, first exp, restart, and nightly.

no messenger calling, no viber calling, no theme, horrible battery, no weather, poor voice calling.

I can not confirm this. Only the LED notification is not working on my device, the rest is fine. Battery life is good, not better or worse than CM13.1.
Use the official TWRP version from webside 3.0.3-xxx see above.
 
Last edited:

drmcatchr

Senior Member
May 9, 2014
88
38
Successfully upgraded to the latest LineageOS 20170125-nightly (20170120 > 20170125-experimental > 20170125-nightly) Installed Pixel Camera, but it force quits. Anyone know which version would work on this build? Thanks!
 

elmkzgirxp

Senior Member
May 16, 2013
724
236
Successfully upgraded to the latest LineageOS 20170125-nightly (20170120 > 20170125-experimental > 20170125-nightly) Installed Pixel Camera, but it force quits. Anyone know which version would work on this build? Thanks!
The Pixel Camera doesn't work on all N builds, so you have to use the legacy version, which in this case is v2.7. I don't get why v4.1 and v4.2 doesn't work, since v4.1 works perfectly with OOS Nougat. It could be an OpenGApps issue, or all N builds have issues.
 
D

Deleted member 2044343

Guest
every update its getting worse and worse.

clean flash, first exp, restart, and nightly.

no messenger calling, no viber calling, no theme, horrible battery, no weather, poor voice calling.

oh and also had to flash again the twrp.

I can't confirm as well.

Clean setup is running fine:
1) signed nightly,
2) Lineage superuser zip and
3) OpenGaps
4) reboot.

Btw if you're doing a clean setup, experimental build isn't needed. Maybe that's causing your issues.
 
  • Like
Reactions: thwrldbyjw

3's&7's

Senior Member
Jul 25, 2013
820
192
P3X-439
WiFi won't turn on here after updating kernel to latest elemental x. I am.using the official 01.25.17 from Lineage. The Unofficial from this thread, same date, ran like a charm.
 

Ducter

Senior Member
Jan 10, 2009
1,956
1,257
Google Pixel 8 Pro
It's getting over complicated, the experimental build is only if you can't do a full wipe at the moment. Best bet is to install nightly clean and be done with it.
 

3's&7's

Senior Member
Jul 25, 2013
820
192
P3X-439
Try wiping dalvik/ cache & cache
Thanks for this suggestion.

Unfortunately wiping davlik + cache & then cache again in TWRP, WiFi is still not turning on.

Again, using official 012517 (clean flash) + latest Elemental X. WiFi was available prior to flashing Elemental X this AM when I decides to try it out.

Perhaps a dirty flash the official 012517 (resulting in the default kernel returning) will bring WiFi back. Will try and report.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 254
    LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.​
    Code:
    #include <std_disclaimer.h>
    
    /*
     * Your warranty is now void.
     *
     * We are not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at us for messing up your device, we will laugh at you.
     *
     */
    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.

    Important information:
    This thread is for official LineageOS 14.1 builds for OnePlus 3/3T. The following will not be supported here:
    • Custom kernels
    • Mods
    • Xposed

    We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
    • Flashed a custom kernel
    • Installed or did mods from untrusted sources
    • Modified system files

    Known bugs:
    • Front camera is buggy, due to the buggy camera HAL Fixed by OnePlus

    Installation:
    First time flashing LineageOS 14.1 on your device, or coming from another ROM?
    1. Download the zip(s)
    2. Install a compatible Recovery (See #2 for details)
    3. Perform a nandroid backup of your current ROM (Optional)
    4. Wipe data/factory reset
    5. Flash LineageOS
    6. Optional: Install the Google Apps addon package, install the SU addon package(https://download.lineageos.org/extras, choose arm64)
    7. Reboot

    Source code:

    Credits:
    • LineageOS Team & Contributors
    • Code Aurora Forum
    • ......

    Download:

    XDA:DevDB Information
    LineageOS, ROM for the OnePlus 3

    Contributors
    dianlujitao, Grarak
    Source Code: https://github.com/lineageos

    ROM OS Version: 7.x Nougat

    Version Information
    Status: Nightly

    Created 2016-11-09
    Last Updated 2017-03-27
    127
    Release note:
    • New builds (after 2017/1/15) uses F2FS backported from 4.10 kernel, you may meet compatibility problems such as deadlocks, if you do, flash TWRP provided in OP and choose "Wipe -> Format Data" to format(not just wipe) your /data partition, this will clean the entire /data partition, including the emulated sdcard, so don't forget to backup your data before. After that, your data partition will be formatted into ext4, if you want to keep using f2fs, just convert fs type normally in TWRP.
      [*]For oneplus3, my unofficial TWRP is recommended, as it's what I use. For 3T, TWRP 3.0.4 is recommended.
    • As of 2017/6/17, official TWRP for OnePlus 3(https://dl.twrp.me/oneplus3/) is updated with latest LineageOS kernel and OxygenOS decryption stuff, it builds against Omni 7.1.2 and supports both op3&3t, now it's the recommended recovery.
    • 20170120 build includes sdcardfs, security fixes and camera fixes&improvements, touch to focus is fixed as well, if it's still not working, clean Snap's data. BTW N kernel source is released now, I'll take days to bring up, don't ask for ETA.
    • Regarding installation, we recommend that users wipe when switching to LineageOS, and reinstall their gapps. However, we recognize that this can be time consuming, so we are offering an EXPERIMENTAL (read as, if it fails, you’ll have to wipe anyways) solution. Visit http://lineageos.org/Update-and-Build-Prep/for more details
    • Started from lineage-14.1-20170207-nightly-oneplus3-signed.zip, we provide unified builds for both 3&3T, and you need to install certain firmware to pass the TrustZone assertion. Currently they're the OxygenOS Open Beta 19/11 ones. As oneplus won't update them every time new OTAs are rolling out, firmware from other versions might also pass the assertion.

    FAQs:
    My status bar quick pulldown and notification slider are broken, why?
    See https://github.com/opengapps/opengapps/wiki/Notes-for-CMSetupWizard

    Why the builds are unified?
    Tell me the difference between OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883 and OnePlus3TOxygen_28_OTA_039_all_1701140132_de9036f11e2246a8, why not?
    c3vAIRA.png
    65
    Latest Firmware files for oneplus3/oneplus3t -5.7.2017-
    Make a nandroid backup before you proceed
    Flash the following files using the latest official twrp to avoid any recovery related issues.
    Make sure to do a clean flash if your rom requires an updated firmware.
    Don't ever flash an oneplus3 firmware on oneplus3t or an oneplus3t firmware on oneplus3.

    Oneplus3
    Instructions only for oneplus3!
    1-clean flash is recommended.
    2-Falsh OnePlus3_OpenBeta19-FIRMWARE+MODEM-flashable.zip.
    3-Flash the latest laos nightly.
    4-optional: gapps arm64 7.1 and -su-addon arm64, this enables inbuild laos root.
    5-Wipe Dalvik/cache and reboot.

    Oneplus3t
    Instructions only for oneplus3t!
    1-clean flash is recommended.
    2-Flash OnePlus3T_Beta10-(4-7-17)-FIRMWARE-flashable.zip.
    3-Flash the latest laos nightly
    4-optional: gapps arm64 7.1 and -su-addon arm64, this enables inbuild laos root.
    5-Wipe Dalvik/cache and reboot.

    For people who rather use the oxygenos camera:
    Get OnePlusCameraV8-siankatabg.apk and OnePlusGallery-V8-siankatabg.apk

    If you have problems after flashing any custom kernels please provide a log in the thread where you got the kernel from and not here!

    Credits:
    @nvertigo67 @djsubterrain @Eliminater @kamilmirza op3t firmware
    @jamal2367 op3 firmware
    @siankatabg oos camera/gallery port
    52
    Almost all former CM developers are involved in LAOS, including Steve and some kind guys who still work for cyngn, so don't worry.
    btw I won't rebrand the thread until LAOS is a thing
    51
    Today I switched the kernel to the LA.UM based one, and merged patches for op3t support.
    It means, the NEXT weekly will be a unified build for both op3 and op3t.
    As we're not shipping radio images now, you may need to install the latest OOS radio images to pass the TZ assertion.