[ROM][Official][Weekly] LineageOS 14.1 for OnePlus 3/3T

Search This thread

Rajeev

Recognized Contributor
Nov 24, 2012
16,297
26,531
Chennai , I N D I A
Nice, so , next build its ok for 3t?


Posted by "dianlujitao"

Today I switched the kernel to the LA.UM based one, and merged patches for op3t support.
It means, the NEXT weekly will be a unified build for both op3 and op3t.
As we're not shipping radio images now, you may need to install the latest OOS radio images to pass the TZ assertion.
 
  • Like
Reactions: soder and pijas82

aney1

Senior Member
Jun 2, 2012
73
41
OnePlus 3
OnePlus 7
I tryed the last nightly and had issues with my GPS,
every few seconds it lost the lock and needed a few seconds to reacquire it.
Anyone else having that problem?
I had the same issues, but today I flashed the latest firmware from OOS 4.0.2 and GPS seems to be working fine now.
I only tested it for a couple of minutes. But I got a fix on 18 satellites (GPS, Glonass and Beidou). Before flashing the firmware I rarely got more than 10 satellites and my phone also lost the lock all the time.
Tomorrow I'll test it on my way to work to be sure.
You can get the latest firmware here: https://forum.xda-developers.com/oneplus-3/how-to/radio-modem-collection-flashable-zips-t3468628

Any idea why the fingerprint sensor suck so hard on CM14?
On CM14.1 the fingerprint sensor occasionally didn't work on my phone. But since flashing the first official LineageOS nightly, I haven't had any issues.
If it's too slow try to set "Animator duration scale" in Developer options to a lower value. LineageOS looks so slow, because there's no unlock animation at all on OOS.
 

ninguem98

Senior Member
May 1, 2013
89
40
Barbosa ferraz
OnePlus 7 Pro
So, when I open two apps at the same time, and the one at the bottom is the YouTube app, it shows a black screen (audio still works, though). However, if I use the split screen feature while using YouTube (therefore, it will be at the top), the video has no problems at all. Should I provide some logs? Has anyone experienced this issue?
 

ninguem98

Senior Member
May 1, 2013
89
40
Barbosa ferraz
OnePlus 7 Pro
Edit: The other issue was isolated to the xda app. Nothing to do here. Please delete this post
 

Attachments

  • Screenshot_20170201-194918.jpg
    Screenshot_20170201-194918.jpg
    132.6 KB · Views: 578
Last edited:

drmcatchr

Senior Member
May 9, 2014
82
34
Pardon my humble query. But what does this mean?

As we're not shipping radio images now, you may need to install the latest OOS radio images to pass the TZ assertion.

Is it a requirement that we should flash radio images here on along with the weekly nightlies? Could someone explain please?
 

Gandicela

Senior Member
Nov 16, 2011
1,806
716
Singapore
I had the same issues, but today I flashed the latest firmware from OOS 4.0.2 and GPS seems to be working fine now.
I only tested it for a couple of minutes. But I got a fix on 18 satellites (GPS, Glonass and Beidou). Before flashing the firmware I rarely got more than 10 satellites and my phone also lost the lock all the time.
Tomorrow I'll test it on my way to work to be sure.
You can get the latest firmware here: https://forum.xda-developers.com/oneplus-3/how-to/radio-modem-collection-flashable-zips-t3468628


On CM14.1 the fingerprint sensor occasionally didn't work on my phone. But since flashing the first official LineageOS nightly, I haven't had any issues.
If it's too slow try to set "Animator duration scale" in Developer options to a lower value. LineageOS looks so slow, because there's no unlock animation at all on OOS.
Thanks for the link.

Sent from my oneplus3 using XDA Labs
 

JohnHorus

Senior Member
Aug 26, 2012
387
88
Alert slider does not work, even with full backup+restore with TWRP. Clean flashed latest nightly(0131 build). Tried dirty flash again the 0131 build, it didn't work too.

Same for me! Frustrating, as I had the build from the 25th installed before and it was working fine! Although, I saw people reporting on that build that it wasn't as well. Strange, because I clean flashed the 25th, and it was fine. Clean flashed the 31st, and it's not.
 

qhsusb_bulk

Senior Member
Oct 29, 2014
166
138
Same for me! Frustrating, as I had the build from the 25th installed before and it was working fine! Although, I saw people reporting on that build that it wasn't as well. Strange, because I clean flashed the 25th, and it was fine. Clean flashed the 31st, and it's not.

The interesting thing is, when screen is on and navigation buttons are dimmed if you switch the alert slider navigation buttons are lighting up without touching buttons/screen.
 

JohnHorus

Senior Member
Aug 26, 2012
387
88
The interesting thing is, when screen is on and navigation buttons are dimmed if you switch the alert slider navigation buttons are lighting up without touching buttons/screen.

Same for me.

Here's something... weird. When I flashed the build from the 31st, the setup wizard was the same as stock OOS, with blue accents. I figured they just switched it over, but I tried flashing the 25th again to see if the buttons were fixed. They weren't, and the setup wizard was still the blue one! When I initially installed the build from the 25th, setup was Lineage-themed. How does that make *ANY* sense?

What a mess.
 

qhsusb_bulk

Senior Member
Oct 29, 2014
166
138
Same for me.

Here's something... weird. When I flashed the build from the 31st, the setup wizard was the same as stock OOS, with blue accents. I figured they just switched it over, but I tried flashing the 25th again to see if the buttons were fixed. They weren't, and the setup wizard was still the blue one! When I initially installed the build from the 25th, setup was Lineage-themed. How does that make *ANY* sense?

What a mess.

Fully same.

https://forum.xda-developers.com/on...ds-cm14-1-extra-commits-t3518672/post70840068 I tried the app which is written on this post. It works without any problem.
 

sillypilot

Member
Aug 30, 2012
29
4
Can I relock the bootloader after installation? I unlock the BL to install TWRP and then install Lineage OS 14.1 (1/31 nighty), everything is fine except I cannot use android pay with unlocked BL, so I relock the BL but there's bootloop, I don't know it's my problem or the rom is only work on unlock bootloader
 
  • Like
Reactions: chrone

Kah_S

Senior Member
Sep 17, 2013
93
27
Can I relock the bootloader after installation? I unlock the BL to install TWRP and then install Lineage OS 14.1 (1/31 nighty), everything is fine except I cannot use android pay with unlocked BL, so I relock the BL but there's bootloop, I don't know it's my problem or the rom is only work on unlock bootloader

Only stock rom can lock the BL
 

Top Liked Posts

  • There are no posts matching your filters.
  • 254
    LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.​
    Code:
    #include <std_disclaimer.h>
    
    /*
     * Your warranty is now void.
     *
     * We are not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at us for messing up your device, we will laugh at you.
     *
     */
    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.

    Important information:
    This thread is for official LineageOS 14.1 builds for OnePlus 3/3T. The following will not be supported here:
    • Custom kernels
    • Mods
    • Xposed

    We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
    • Flashed a custom kernel
    • Installed or did mods from untrusted sources
    • Modified system files

    Known bugs:
    • Front camera is buggy, due to the buggy camera HAL Fixed by OnePlus

    Installation:
    First time flashing LineageOS 14.1 on your device, or coming from another ROM?
    1. Download the zip(s)
    2. Install a compatible Recovery (See #2 for details)
    3. Perform a nandroid backup of your current ROM (Optional)
    4. Wipe data/factory reset
    5. Flash LineageOS
    6. Optional: Install the Google Apps addon package, install the SU addon package(https://download.lineageos.org/extras, choose arm64)
    7. Reboot

    Source code:

    Credits:
    • LineageOS Team & Contributors
    • Code Aurora Forum
    • ......

    Download:

    XDA:DevDB Information
    LineageOS, ROM for the OnePlus 3

    Contributors
    dianlujitao, Grarak
    Source Code: https://github.com/lineageos

    ROM OS Version: 7.x Nougat

    Version Information
    Status: Nightly

    Created 2016-11-09
    Last Updated 2017-03-27
    127
    Release note:
    • New builds (after 2017/1/15) uses F2FS backported from 4.10 kernel, you may meet compatibility problems such as deadlocks, if you do, flash TWRP provided in OP and choose "Wipe -> Format Data" to format(not just wipe) your /data partition, this will clean the entire /data partition, including the emulated sdcard, so don't forget to backup your data before. After that, your data partition will be formatted into ext4, if you want to keep using f2fs, just convert fs type normally in TWRP.
      [*]For oneplus3, my unofficial TWRP is recommended, as it's what I use. For 3T, TWRP 3.0.4 is recommended.
    • As of 2017/6/17, official TWRP for OnePlus 3(https://dl.twrp.me/oneplus3/) is updated with latest LineageOS kernel and OxygenOS decryption stuff, it builds against Omni 7.1.2 and supports both op3&3t, now it's the recommended recovery.
    • 20170120 build includes sdcardfs, security fixes and camera fixes&improvements, touch to focus is fixed as well, if it's still not working, clean Snap's data. BTW N kernel source is released now, I'll take days to bring up, don't ask for ETA.
    • Regarding installation, we recommend that users wipe when switching to LineageOS, and reinstall their gapps. However, we recognize that this can be time consuming, so we are offering an EXPERIMENTAL (read as, if it fails, you’ll have to wipe anyways) solution. Visit http://lineageos.org/Update-and-Build-Prep/for more details
    • Started from lineage-14.1-20170207-nightly-oneplus3-signed.zip, we provide unified builds for both 3&3T, and you need to install certain firmware to pass the TrustZone assertion. Currently they're the OxygenOS Open Beta 19/11 ones. As oneplus won't update them every time new OTAs are rolling out, firmware from other versions might also pass the assertion.

    FAQs:
    My status bar quick pulldown and notification slider are broken, why?
    See https://github.com/opengapps/opengapps/wiki/Notes-for-CMSetupWizard

    Why the builds are unified?
    Tell me the difference between OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883 and OnePlus3TOxygen_28_OTA_039_all_1701140132_de9036f11e2246a8, why not?
    c3vAIRA.png
    65
    Latest Firmware files for oneplus3/oneplus3t -5.7.2017-
    Make a nandroid backup before you proceed
    Flash the following files using the latest official twrp to avoid any recovery related issues.
    Make sure to do a clean flash if your rom requires an updated firmware.
    Don't ever flash an oneplus3 firmware on oneplus3t or an oneplus3t firmware on oneplus3.

    Oneplus3
    Instructions only for oneplus3!
    1-clean flash is recommended.
    2-Falsh OnePlus3_OpenBeta19-FIRMWARE+MODEM-flashable.zip.
    3-Flash the latest laos nightly.
    4-optional: gapps arm64 7.1 and -su-addon arm64, this enables inbuild laos root.
    5-Wipe Dalvik/cache and reboot.

    Oneplus3t
    Instructions only for oneplus3t!
    1-clean flash is recommended.
    2-Flash OnePlus3T_Beta10-(4-7-17)-FIRMWARE-flashable.zip.
    3-Flash the latest laos nightly
    4-optional: gapps arm64 7.1 and -su-addon arm64, this enables inbuild laos root.
    5-Wipe Dalvik/cache and reboot.

    For people who rather use the oxygenos camera:
    Get OnePlusCameraV8-siankatabg.apk and OnePlusGallery-V8-siankatabg.apk

    If you have problems after flashing any custom kernels please provide a log in the thread where you got the kernel from and not here!

    Credits:
    @nvertigo67 @djsubterrain @Eliminater @kamilmirza op3t firmware
    @jamal2367 op3 firmware
    @siankatabg oos camera/gallery port
    52
    Almost all former CM developers are involved in LAOS, including Steve and some kind guys who still work for cyngn, so don't worry.
    btw I won't rebrand the thread until LAOS is a thing
    51
    Today I switched the kernel to the LA.UM based one, and merged patches for op3t support.
    It means, the NEXT weekly will be a unified build for both op3 and op3t.
    As we're not shipping radio images now, you may need to install the latest OOS radio images to pass the TZ assertion.