You'll probably notice soon (if you didn`t already) that sensors aren`t working. I'm working on a patch, will post it soon.
It's the same rom for all 3 types of S10. Download link for v1.1 and the needed TWRP are few posts above.
[ROM][OneUI] hadesRom Pie Stock v2.5 for Exynos S10e/S10/S10+ [28.11.2019]
- Thread starter corsicanu
- Start date
i ment the stock firmware u need to have for it to work
What firmware/rom do you have now installed on your phone?
Sent from my SM-G975F using Tapatalk
You first need to get to G970FXXU3ASIG, then follow instructions from first page.
Cheers!
Last edited:
S10e Sensors patch - only for hadesRom v1.1
Install the attached zip as any other in TWRP, reboot and enjoy!
Regards!
Install the attached zip as any other in TWRP, reboot and enjoy!
Regards!
I bought S10+ via my ISP provider, so it has "MOT" service provider SW. If I understand correctly, to install this ROM, I need to install correct FW on my S10+, then install HadesROM?
Build number is G975FXXU3ASIG, Baseband version G975FXXU3ASIE.
Build number is G975FXXU3ASIG, Baseband version G975FXXU3ASIE.
Your firmware is fully compatible with the TWRP and hadesRom, just follow the instructions in first page to get TWRP installed, then flash hadesRom as any other zip. :highfive:
Sorry guys. I have a ques6. Is that Rom compatible with Verizon sim? Does it have VZW csc?
I have the S10+, can i flash this too? Or is it only for S10e?
You don't need it, if it ain't broken there's no need to fix it aye
Sure, lemme do some magic to find out your device variant, bootloader/modem version and further steps to reproduce the issue.......
.......
.......
.......
Couldn't find anything..
So how about sharing some more info as i kindly asked for in the FAQ?
Thanks
Unlocked BL and installed your ROM an hour or two ago (was so easy :angel. Installed all my apps, checked everything .... Will test it through weekend, but it seems it will work as a charm! :3 Thank you, will donate for a coffee.
PS: May I install magisk modules normally? Priority is "Emoji Switch Guy" to install EmojiOne aka JoyPixels, cause Samsung Emoji sucks.
. Installed all my apps, checked everything .... Will test it through weekend, but it seems it will work as a charm! :3 Thank you, will donate for a coffee.PS: May I install magisk modules normally? Priority is "Emoji Switch Guy" to install EmojiOne aka JoyPixels, cause Samsung Emoji sucks.
Unlocked BL and installed your ROM an hour or two ago (was so easy :angel
PS: May I install magisk modules normally? Priority is "Emoji Switch Guy" to install EmojiOne aka JoyPixels, cause Samsung Emoji sucks.
I am running Riru Core and Riru edExposed in Magisk with Gravity Box and Firefds kit without any problems so far.
All just installed "normally"
Hi,
I have a S10e.
Little question.
Can I flash this rom once my rooted phone and TWRP installed please?
Thanks
I have a S10e.
Little question.
Can I flash this rom once my rooted phone and TWRP installed please?
Thanks
Attachments
-
Screenshot_20191025-223232_Settings.jpg
Yes, you should be able to follow the instructions in OP and make sure to flash version 1.1 and the sensor patch somewhere above.
As far I can see you are on the proper firmware already.
Hi everyone. I've done my fair share of romming and rooting but since things are slightly different here, I had a few questions.
1. Does a rom based on OneUI decrease the camera quality like other roms? What else would take a hit/change? (apart from Knox dependent stuff)
2. How are updates handled? OTAs or manual flashing only?
3. I have a device from one country, but now live in another with a local sim. Should I keep my firmware to the original country or change it to the new one?
Basically, I just want to make sure of all the pros and cons of using a rom, since Knox tripping is permanent. Thank you in advance.
1. Does a rom based on OneUI decrease the camera quality like other roms? What else would take a hit/change? (apart from Knox dependent stuff)
2. How are updates handled? OTAs or manual flashing only?
3. I have a device from one country, but now live in another with a local sim. Should I keep my firmware to the original country or change it to the new one?
Basically, I just want to make sure of all the pros and cons of using a rom, since Knox tripping is permanent. Thank you in advance.
ROM is awesome. Works flawlessly, battery is better (specially screen off consumpion). The only problem I have is mobile bank (which is root problem, not only this ROM problem).
Camera is the same, tested photo and video on friday. Updating is manual I would say. About FW I can't say, will leave it to others.
Anyone have any idea, how to bypass mobile bank security (it checks BL unlock I think, or maybe just root)? Magisk hide used to work, now it doesn't anymore.
Camera is the same, tested photo and video on friday. Updating is manual I would say. About FW I can't say, will leave it to others.
Anyone have any idea, how to bypass mobile bank security (it checks BL unlock I think, or maybe just root)? Magisk hide used to work, now it doesn't anymore.
Will this be compatible with the s10
PDA:G973FXXS3ASII
CSC:G973FOXM3ASIE
PDA:G973FXXS3ASII
CSC:G973FOXM3ASIE
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
82Disclaimer
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Some personal thoughts:
- you should read at least install instructions stated in this post - i won`t offer support for any issues regarding installation - for extra questions read #4 post;
- press 'Thanks' button instead of saying it - it will keep the thread clean and keep me motivated to do more;
- feel free to send me some coffee (which btw, runs out pretty quick), via paypal, if you want to support my work;
- if you take any of my work without my permission i'll report you, and you'll probably get banned.
Rom Features
Only for G970F / G970N / G973F / G973N / G975F / G975N
- Android 9.0.0
- Full G975FXXU3ASK1 November release
- Proper S10e integration with files from G970FXXS3ASK1 - November release
- Proper S10 integration with files from G973FXXS3ASK1 - November release
- November security patch
- Heavy debloated/deknoxed
- Aroma Installer
- selectable wipe
- selectable mods
- selectable csc
- selectable csc features
- selectable bixby key behavior
- selectable GoodLock apps
- selectable bloatware
- selectable Android 10 beta apps - RMM prepatched (more info about RMM here)
- Android 10 beta apps (Clock, Calendar, Keyboard, Weather, Messages, MyFiles)
- Selectable Edge Features (light edge/full edge/no edge)
- Selectable DEX Features
- Samsung AppLock, ScreenRecorder, Secure Wifi, Call blocking app, BikeMode (Aroma selectable)
- hadesRom custom bootanimation (Aroma selectable)
- Secure Folder (Aroma selectable)
- GoodLock apps (Aroma selectable)
- Smart Manager from Chinese S9 (Includes Samsung Package Installer)
- Yuva features (UsbBackup, SPowerPlanning, SProtect, Ultra Data Saving, Memory Saver and Samsung Max)
- patched Dual Messenger for all user apps
- patched Samsung Internet for secure mode
- Bixby Key remapping
- 1120 Fonts Mod
- Google Fonts
- AdAway and Youtube Vanced
- Duos + sdCard Patch
- Disabled high brightness warning
- Disabled safe volume warning
- Patched reboot button to reboot rooted
- Patched settings to show status Official
- Enabled some csc features (Extra toggles, call record, statusbar network speed etc.
- Removed extra product bloatware (keyboard languages & handwriting recognition data)
- hadesKernel v1.1
- G97*FXXS3ASJG november source
- compiled with latest clang available (r365631c) vs latest linaro gcc (arm-8.3-2019.03)
- fully enforcing with the ability to change to permissive
- knox/proca/defex/rkp/tima and other security spam disabled
- Moro sound control
- boeffla wakelock blocker with a default list of wakelocks for better battery
- switched zram to lz4 compression for better decompression speeds
- updated lz4 module
- optimized Integer SQRT. for upto 3x faster operation
- crc toggle
- added maple io scheduler
- enabled deadline io scheduler
- disabled kernel samepage merging
- wireguard support
- mass_storage mode for drivedroid app
Please first take a look at FAQ in #4 post for further issues/workarounds.
- knox related features won't work (Samsung Pay, Pass etc.)
- none other encountered
@Noxxxious
Rayan Refoua (@Rrs_hidden)
@ananjaser1211
@AbrahamGC
@Grouxho
@Sannoc69
@thereassaad
@yash92duster
@PerfectSlayer
@khongloi113
@nm111
@BlackMesa123
@SuperR.
@Winb33
@Dante63
@henklbr
@OnikdudeX
testers & donors
*please pm me if i forgot someone
XDA:DevDB Information
hadesRom, ROM for the Samsung Galaxy S10
Contributors
corsicanu
Source Code: http://s.go.ro/f6aqlfso
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: Samsung Experience
Version Information
Status: Stable
Current Stable Version: v2.5
Stable Release Date: 2019-11-28
Created 2019-10-09
Last Updated 2020-02-244334Reserved
How to install (hadesRom compatible) TWRP:
You must have at least September G97*FXXU3ASG8 (for F variant) or October G970NKSU3ASII (for N variant) firmware release installed on your phone
Prerequisites: Samsung USB drivers, Odin v3.13.3
If you already have the bootloader unlocked you can skip to step 6.
- Make sure OEM Unlock is ON in developer settings;
- Turn off the phone;
- Use vol down + bixby key + usb cable plugged to a pc to start the phone in download mode;
- Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!! - Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
- Make sure OEM Unlock is ON in developer settings;
- Turn off the phone;
- Use vol down + bixby key + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5! - Download appropriate TWRP tar file according to your device (beyond0lte - G970F/G970N, beyond1lte - G973F/G973N, beyond2lte - G975F/G975N) - downloads here
- Open Odin v3.13.3 and place the downloaded TWRP tar file in AP tab and click Start - once you press start grab the phone and press vol up + bixby + power to force it boot straight in TWRP after flashing
- In TWRP home screen press wipe - format data - yes;
23
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone