Development [ROM][OOS CAM][OFFICIAL][OnePlus 9 Pro][13.0.0_r23]Nameless AOSP[2023/01/22]

Search This thread

rpmccormick

Senior Member
Dec 1, 2008
786
117
OnePlus 7 Pro
I can't get this to do anything but Qualcomm Crash Dump mode.

1) MSM using TMO-EU-MSM, wipe
2) Update to 11.2.10.10
3) Update to OOS12
4) Update to OOS 12.1, wipe
5) Flash vtbo, vender_boot, boot
6) sideload this rom using Lineage Recovery, wipe
7) sideload this rom again (now using Nameless Recovery) so it is in both slots, wipe
8) Reboot -> Crash Dump
9) Reboot -> Stuck on 1+ box, powered by android (I just did #9, gonna leave it 20min I guess. I have done this multiple times going back to step 7 after step 8, maybe just waiting on step 9 will work? doubt it.)
 

golfgtiedition30

Senior Member
Dec 2, 2012
1,675
1,306
Sony Xperia Z
Samsung Galaxy Ace II
I can't get this to do anything but Qualcomm Crash Dump mode.

1) MSM using TMO-EU-MSM, wipe
2) Update to 11.2.10.10
3) Update to OOS12
4) Update to OOS 12.1, wipe
5) Flash vtbo, vender_boot, boot
6) sideload this rom using Lineage Recovery, wipe
7) sideload this rom again (now using Nameless Recovery) so it is in both slots, wipe
8) Reboot -> Crash Dump
9) Reboot -> Stuck on 1+ box, powered by android (I just did #9, gonna leave it 20min I guess. I have done this multiple times going back to step 7 after step 8, maybe just waiting on step 9 will work? doubt it.)
After step 4 reboot and update again. Then you will have OOS in both slots and skip step 7
 

theroronoa

Member
Jun 14, 2019
15
0
Xiaomi Poco F1
OnePlus 6T
Hi everyone, I just got this device and unlocked the bootloader. I wanted to install this rom but i'm on C62 version and this rom requires my device to be on C48.

I have no idea how to go back to c48 from c62 build. If anyone can help me with this then it would be appreciated. Thanks
 

break.cold

Senior Member
Jun 25, 2014
397
136
Hi everyone, I just got this device and unlocked the bootloader. I wanted to install this rom but i'm on C62 version and this rom requires my device to be on C48.

I have no idea how to go back to c48 from c62 build. If anyone can help me with this then it would be appreciated. Thanks

Just wait few days, it even evetually be update C.62.
In the mean while you can try crDriod, now it has updated to based firmware to C.62
 

break.cold

Senior Member
Jun 25, 2014
397
136
I faced problems on C.60 while using this rom, so I therefore install C.48 Global on IND model of Oneplus 9 Pro
 

break.cold

Senior Member
Jun 25, 2014
397
136
So C.48 GLOBAL doesn't work on EU models. And unfortunately I don't have a IND model but a EU model. Is there a C.48 build for EU ? Highest I could find was a C.47 EU build.

I would advise to wait. Because this rom will evetually be updated to C.62 pretty soon. I mean while you can try crDriod it based on now C.62.
 

IAMHOBBES

Member
Jun 15, 2017
12
0
What I want know is how the performance is compared to Oxygen. I got slow UI. Animations are choppy and refresh rate drops down to 60hz too often. Does lineage have these issues?
 

Top Liked Posts

  • 1
    oh awesome, would the proper step be to flash a global variant of OOS13 than flash nameless afterwards?
    Yeah
  • 17
    Hello everyone,

    We're very excited to release Nameless-AOSP based on Oxygen OS 13 firmware to the OnePlus 9 and 9 Pro device.

    Changelog:
    * Merged January security patch
    * Fixed mobile data QS tile behavior
    * Nameless Launcher: Allow to hide search bar in app drawer
    * Nameless Launcher: Fixed search app not working
    * Nameless Launcher: Removed "Hide status bar" for now
    * Minor cleanup and improvements

    Before flashing Nameless-AOSP, we highly recommended to follow below steps

    Flash instruction
    * Download dtbo, boot and vendor_boot images
    * Flash images in fastboot mode
    * fastboot flash dtbo dtbo.img
    * fastboot flash boot boot.img
    * fastboot flash vendor_boot vendor_boot.img
    * Reboot to recovery mode
    * Install update > ADB sideload
    adb sideload <filename>.zip
    * Do factory reset
    * Reboot system

    Note:
    * Clean flash required
    * Switch back to non-unified builds
    * Added the F.18 firmware in Nameless-AOSP build so don't worry about updating firmware manually to the latest version, but keep in mind if there are any broken like sensors or other stuff we're recommended to flash Oxygen OS 13 build and flash nameless build.

    Download:
    OnePlus 9 Pro
    OnePlus 9 Pro images
    10
    New Build Up!

    Source changelog
    - Allow to set preferred screenshot feedback
    - Allow to suppress notifications sound/vibration if screen is ON

    Device changelog
    - Added IFAA (alipay payment) support
    - Improved oneplus camera stability (ui will be more smoother)
    - Improved FOD unlock speed
    - Enable freeform windows
    - Switched to oneplus dolby atmos
    - Switched to oos 12 gallery
    - Fixed slow motion mode in oneplus camera
    - Fixed dialer pad tones

    FAQ
    1. Dirty flash is fine if I'm coming from a previous oos 13 firmware based build?

    A: No need to do clean flash, dirty flash works and you can do sideload or update from ota or local update from ota.

    Gdrive mirror: https://drive.google.com/uc?id=1GWO-yWXiQIt_BfbDWoZ8djgaKd2rNgK6&export=download
    5
    Man, congrats on the job! You, as always, are very committed to providing new updates.
    Could you tell us what benefit the fw of oos13 brings us in this new build?
    Battery backup and performance improved and new oos camera ui. Battery backup much better then oos 12 fw base builds
    2
    D:\platform-tools>fastboot flash abl abl.img
    Sending 'abl' (204 KB) OKAY [ 0.008s]
    Writing 'abl' FAILED (remote: 'Flashing is not allowed for Critical Partitions.
    ')
    fastboot: error: Command failed

    :(
    Read my first message , I said FASTBOOTD not normal fastboot. When you are in fastboot, use the command "fastboot reboot fastboot" to reboot to FASTBOOTD and then flash that abl image.
    2
    Can u make the Qs settings in White somehow?
  • 41
    nameless_logo.png

    Nameless AOSP for OnePlus 9 Pro [lemonadep]

    Nameless AOSP is based on Android Open Source Project, inspired by Google Pixel. We offer a smooth and stable experience for your device with a selected set of amazing features that provide an exceptional user experience.

    Whats working?
    Everything working :)

    Known issues

    Nothing yet
    You tell me


    Flash Instructions

    Download
    DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED !

    Donate
    Chris Chen PayPal
    Chandu Dyavanapelli PayPal
    UPI ID: [email protected]


    Team
    Chris Chen - Founder & lead Developer
    Chandu Dyavanapelli - Co Founder & lead Developer

    Credits
    Android Open-Source Project
    Pixel Experience
    AospExtended
    Proton AOSP

    LineageOS
    Havoc OS
    Arrow OS
    Krypton


    Others, I may have forgot to mention


    Stay tuned
    Our Telegram Group

    19
    New build up!

    Source changelog
    - Merged October security patch (android-13.0.0_r11).
    - Added back touch haptic feedback main toggle.
    - Added vibration on call connected/disconnected.
    - Added long press power to toggle torch.
    - Added adaptive playback.
    - Added click to take partial screenshot.
    - Added more settings options for screenrecorder.
    - Added hotspot toggle in QS internet dialog.
    - Allow to ignore secure window flag.
    - Allow to hide back gesture arrow.
    - Allow to reset auto brightness preference.
    - Allow to reset battery stats.
    - Allow to set screen brightness for ambient display.
    - Imported more ring vibration pattern from OOS 11.
    - Refactored volume adjustment haptic feedback to Flyme style.
    - Make cutout area touchable.

    Device changelog
    - Updated blobs from LA.UM.9.14.r1-20200-LAHAINA.QSSI13.0.
    - Dropped 90Hz refresh rate support.
    - Added IFAA support (enable alipay fingerprint payment).
    - Added C.63 firmware.
    - Minor tweaks and improved haptic feedback and strength.
    - Fixed wireless quiet mode charging.
    - Fixed warp charging get slow down in some scenarios.
    - Fixed dolby atmos crashing on some media content.
    - Fixed display flickers in some scenarios.
    - Fixed device model show incorrectly for some users.
    17
    I Updated to C.48, so what do I do next? Any help would be greatly appreciated

    I'll walk you through it, the instructions have been so confusing for me but I finally got it working

    -Unlock your bootloader
    -When you reboot, skip through setup, enable developer options again and re-enable USB debugging
    -Boot into fastboot/bootloader (adb reboot bootloader)

    From here, you need to download 5 files
    • dtbo.img
    • vendor_boot.img
    • boot.img
    • latest version of nameless rom
    • copy-partitions-20210323_1922.zip
    dtbo.img and vendor_boot.img are found HERE
    boot.img and nameless rom are found on the download link in the main post, HERE if you're lazy
    copy partitions zip is found
    HERE

    -In fastboot, type these in order
    fastboot flash dtbo dtbo.img
    fastboot flash vendor_boot vendor_boot.img
    fastboot flash boot boot.img

    Obviously, if the img files aren't in the root adb.exe folder, then you put the path to the file
    E.g - fastboot flash dtbo C:\Users\lol\Desktop\dtbo.img

    At this point you've flashed the nameless recovery, and you're still in fastboot. Now you need to boot into the recovery.


    -Press the volume down button twice so it says "recovery mode" at the top, then press the power button. You're now booting into the recovery.
    -In the recovery, select "Apply Update", then "Apply from ADB"
    -On your PC, type in 'adb sideload copy-partitions-20210323_1922.zip' (Or whatever you've named the copy-partitions zip)

    This is a script that will copy everything from the current slot into the inactive slot. You NEED to do this if you haven't flashed your OOS update twice. Might as well do it anyway just in case.

    -After it's done, click the back button on the top left and get back to the main screen
    -Click advanced, then reboot to recovery
    -Once it reboots into recovery again, click factory reset and follow the instructions
    -When you've factory reset, go back to the main screen again, and go to "Apply Update", then "Apply from ADB" again like you did before
    -Type 'adb sideload nameless.zip' (nameless.zip being the rom, type whatever you've called it, and yes you can rename the zip files for ease)
    -Reboot
    -Enjoy

    NOTE:
    If you use windows powershell, you might get a 'cannot read' error when flashing the rom
    Try using command prompt instead

    When you flash, it might appear as if it's frozen (it was stuck at 47% for me), don't touch it, just leave it and it will install just fine.

    If no devices are showing up in fastboot, use this tutorial HERE
    17
    Hello everyone,

    We're very excited to release Nameless-AOSP based on Oxygen OS 13 firmware to the OnePlus 9 and 9 Pro device.

    Changelog:
    * Merged January security patch
    * Fixed mobile data QS tile behavior
    * Nameless Launcher: Allow to hide search bar in app drawer
    * Nameless Launcher: Fixed search app not working
    * Nameless Launcher: Removed "Hide status bar" for now
    * Minor cleanup and improvements

    Before flashing Nameless-AOSP, we highly recommended to follow below steps

    Flash instruction
    * Download dtbo, boot and vendor_boot images
    * Flash images in fastboot mode
    * fastboot flash dtbo dtbo.img
    * fastboot flash boot boot.img
    * fastboot flash vendor_boot vendor_boot.img
    * Reboot to recovery mode
    * Install update > ADB sideload
    adb sideload <filename>.zip
    * Do factory reset
    * Reboot system

    Note:
    * Clean flash required
    * Switch back to non-unified builds
    * Added the F.18 firmware in Nameless-AOSP build so don't worry about updating firmware manually to the latest version, but keep in mind if there are any broken like sensors or other stuff we're recommended to flash Oxygen OS 13 build and flash nameless build.

    Download:
    OnePlus 9 Pro
    OnePlus 9 Pro images
    16
    Nameless back :)

    New build up!

    Note
    - Clean flash recommended

    Source Changelog
    - Merged May security patch (android-12.1.0_r5)
    - Introduce automated sleep mode
    - Implement background process killer
    - Added preferred network QS tile to quick switch between 4g/5g
    - Added expanded volume panel
    - Added switch data saver icon
    - Added game props for mobile legends
    - Added customize tiles layout in QS panel
    - Added more hotspot settings (AP Band, Hidden network, Device blacklist etc)
    - Added sound QS tile
    - Added AdGuard & Cloudflare private DNS providers
    - Added Custom carrier label & Carrier label placement
    - Added Dora & Weed status bar icons
    - Allow alert slider changes in pocket mode
    - Allow adding some system apps into app lock list
    - Allow to ignore secure flag for windows (Remove screenshot & screenrecord limits)
    - Allow to force show media controller in volume dialog
    - Allow 2 more columns for qs tiles
    - Allow to hide back gesture arrow
    - Allow to switch slot in recovery for AB devices
    - Disable face enroll on Setup Wizard
    - Force fullscreen for Google Dialer
    - Use Mi 11 Ultra games prop for mobile Legends
    - Refactor updater app
    - Fixed random misplaced qs tiles layout
    - Fixed unconditional qs panel expansion in settings
    - Fixed glitchy charging info on lockscreen
    - Fixed auto answer call triggered even after turning off game mode
    - Fixed notification overlay spam with old messages in game mode
    - Fixed weird lockscreen clock font
    - Fixed partial screenshot
    - Fixed wireless emergency alerts crash in settings
    - Fixed pixel launcher search bar color in light mode

    Device Changelog
    - Initial Android 12.1/12L build
    - Switch to user build
    - Switch to los kernel
    - Improved FHD+ resolution
    - Improved haptic feedback
    - Improved battery backup and performance
    - Update blobs, configs, props and vendor scripts from LA.UM.9.14.r1-18900-LAHAINA.QSSI12.0
    - Update CarrierConfig from OOS 12 LE2121_11.C.48
    - Fixed WiFi Display
    - Fixed telephony crash on first boot
    - Fixed Warp Charging not displaying in lockscreen
    - Fixed color modes
    - Make slider haptic feedback progressive
    - Refactor OnePlusSettings
    - Refactor and cleanup device tree and sync latest los changes