Development [ROM][OOS CAM][OFFICIAL][OnePlus 9 Pro][13.0.0_r23]Nameless AOSP[2023/01/22]

[kazikkk]

"Package is for product op9pro but expected lemonadep" how do I solve this problem?

Try restart to recovery, it helps for me

 

[SaIXsealed]

I tried but it doesn't work, i was already on nameless i had done factory reset to make a clean flash but keep telling me that message

 

[habobababo]

I tried but it doesn't work, i was already on nameless i had done factory reset to make a clean flash but keep telling me that message

are you on the right recovery (boot.img)?

 

[xdaxd1996]

I have a problem with the icon of VOWIFI and VOLTE, they do not change until I turn the wifi off and on, they overlap each other

 

[Advali]

Yes I have the same issue. Gotta disconnect the cable and connect it again so it charges fast again. Is there any fix to that ?

Looks like I'll be waiting for the next update before I update to this. Its kinda annoying on the earlier build when I constantly have to unplug and plug the cable just to warp charge. The build I'm using is stable enough for me at the moment.

 

[Beytullah61]

Yes I have the same issue. Gotta disconnect the cable and connect it again so it charges fast again. Is there any fix to that ?

Everything is okay for me , using c62 ind version for fw

 

[ekin_strops]

"Package is for product op9pro but expected lemonadep" how do I solve this problem?

By using the correct recovery.

 

[gillim74]

By using the correct recovery.

I know its off topic but do you know how to get drivers to install on a surface pro x it has a arm 64 processor and for the life of me i cant seem to install them.i ask you cause i know you have alot of knowledge with android and stuff.

 

[recoskyler]

Hi,

I've updated the ROM from the previous (C48) version to the latest version by following the steps here exactly, even switched the slot and flashed the dumped ROM stuff. I downloaded the original ROM from the Oxygen Updater app.

After flashing the updated OP9Pro ROM (original, not Nameless), I rebooted into the system and saw that the system was running normally. Then rebooted into recovery once again to sideload the Nameless ROM. I have flashed it for both slots, however, after booting into the system, the Google logo (the last few seconds of the boot up animation) plays repeatedly in intervals of a few seconds, allowing me just enough time to enter my SIM PIN in between the loops.

I installed the last (C48) version by following the instructions below (formatted the system):

I'll walk you through it, the instructions have been so confusing for me but I finally got it working

-Unlock your bootloader
-When you reboot, skip through setup, enable developer options again and re-enable USB debugging
-Boot into fastboot/bootloader (adb reboot bootloader)

From here, you need to download 5 files

• dtbo.img
• vendor_boot.img
• boot.img
• latest version of nameless rom
• copy-partitions-20210323_1922.zip

dtbo.img and vendor_boot.img are found HERE
boot.img and nameless rom are found on the download link in the main post, HERE if you're lazy
copy partitions zip is found HERE

-In fastboot, type these in order
fastboot flash dtbo dtbo.img
fastboot flash vendor_boot vendor_boot.img
fastboot flash boot boot.img

Obviously, if the img files aren't in the root adb.exe folder, then you put the path to the file
E.g - fastboot flash dtbo C:\Users\lol\Desktop\dtbo.img

At this point you've flashed the nameless recovery, and you're still in fastboot. Now you need to boot into the recovery.

-Press the volume down button twice so it says "recovery mode" at the top, then press the power button. You're now booting into the recovery.
-In the recovery, select "Apply Update", then "Apply from ADB"
-On your PC, type in 'adb sideload copy-partitions-20210323_1922.zip' (Or whatever you've named the copy-partitions zip)

This is a script that will copy everything from the current slot into the inactive slot. You NEED to do this if you haven't flashed your OOS update twice. Might as well do it anyway just in case.

-After it's done, click the back button on the top left and get back to the main screen
-Click advanced, then reboot to recovery
-Once it reboots into recovery again, click factory reset and follow the instructions
-When you've factory reset, go back to the main screen again, and go to "Apply Update", then "Apply from ADB" again like you did before
-Type 'adb sideload nameless.zip' (nameless.zip being the rom, type whatever you've called it, and yes you can rename the zip files for ease)
-Reboot
-Enjoy

NOTE:
If you use windows powershell, you might get a 'cannot read' error when flashing the rom
Try using command prompt instead

When you flash, it might appear as if it's frozen (it was stuck at 47% for me), don't touch it, just leave it and it will install just fine.

If no devices are showing up in fastboot, use this tutorial HERE

Is there a way to fix this issue without formatting?

Thank you in advance

 

[ekin_strops]

Hi,

I've updated the ROM from the previous (C48) version to the latest version by following the steps here exactly, even switched the slot and flashed the dumped ROM stuff. I downloaded the original ROM from the Oxygen Updater app.

After flashing the updated OP9Pro ROM (original, not Nameless), I rebooted into the system and saw that the system was running normally. Then rebooted into recovery once again to sideload the Nameless ROM. I have flashed it for both slots, however, after booting into the system, the Google logo (the last few seconds of the boot up animation) plays repeatedly in intervals of a few seconds, allowing me just enough time to enter my SIM PIN in between the loops.

I installed the last (C48) version by following the instructions below (formatted the system):



Is there a way to fix this issue without formatting?

Thank you in advance

What issue? What ROM are you currently ON?

 

[recoskyler]

What issue? What ROM are you currently ON?

I'm currently on Nameless ROM, the latest build. And as for the OP build, it should be the C62 version after following the LineageOS Update instructions.

The issue is that the phone boots up, however, it goes into a loop of bootup animations. I can use the phone for about 4 seconds, so I can't really check the current version.

I can't find the boot.img in the SourceForge link?

 

[[email protected]@V]

How to disable the lock animation?

 

[Bupreno]

Anyone who keeps switching roms,
Do we have to wipe internal storage everytime we switch roms ?

 

[LuckyTheCoder]

Nameless AOSP for OnePlus 9 Pro [lemonadep]

Nameless AOSP is based on Android Open Source Project, inspired by Google Pixel. We offer a smooth and stable experience for your device with a selected set of amazing features that provide an exceptional user experience.

Whats working?
Everything working

Known issues
Nothing yet
You tell me

Flash Instructions

Install LineageOS on lemonadep | LineageOS Wiki

wiki.lineageos.org

Download
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED !

Donate
Chris Chen PayPal
Chandu Dyavanapelli PayPal
UPI ID: [email protected]

Team
Chris Chen - Founder & lead Developer
Chandu Dyavanapelli - Co Founder & lead Developer

Credits
Android Open-Source Project
Pixel Experience
AospExtended
Proton AOSP
LineageOS
Havoc OS
Arrow OS
Krypton

Others, I may have forgot to mention

Stay tuned
Our Telegram Group​

• Android OS version: 12.1/12L
• Security patch level: Augest 2022
• Build author/Device Maintainer: Chandu Dyavanapelli
• Kernel Source code: https://github.com/chandu078/android_kernel_oneplus_sm8350
• Source code: Nameless AOSP
• Screen Shots: Screenshots

I watched a review on YouTube that stated this apparently maintains the OnePlus Camera & OnePlus settings tab, is this true?

 

[AaronPusteButz]

I watched a review on YouTube that stated this apparently maintains the OnePlus Camera & OnePlus settings tab, is this true?

If you're asking if this rom has the OP Camera installed, than it's a clear no. Afaik OP never released the camera.
Settings on the other hand are included.

It's imho the best custom rom, if you don't want it to be too much vanilla.

 

[TheGhost1951]

If you were going to try this ROM, using TWRP, what partitions needs to be marked for backup and restore Incase you needed to go back to original. See attachment...

 

[oulouloul]

I have some problems with built in google phone app. When someone calls me, it shows nlack screen and freezing. I've cleaned cache and data from app. What can I do?

 

[TheGhost1951]

Are the partitions in this ROM mounted as R/W?

 

[ekin_strops]

Are the partitions in this ROM mounted as R/W?

They never are on Android 12.

 

[mayanks15603]

There seems to be a bug with fast charging. Fast charging only works for sometime and then drops to 500mA. It's really annoying.

+1 on this. I have been observing the same.
Also, almost all the previous bugs reported have been fixed. Great work @chandu dyavanapelli ! Thank you once again.

Bugs:

• Plugging in the phone for charging when switched off displays no charging screen whatsoever and the phone remains stuck on the oneplus logo.
• Network speed indicator gets hidden on the status bar when switching between wifi & LTE. Speed indicator is shown when swiping down QS, but remains hidden on the status bar.
  • Temporary fix: Disable & Re-enable Wifi.