Join the telegram group, there is a link to download via Gdrive. Then transfer to your phone and perform the local update. Or via recovery.
Development [ROM][OOS CAM][OFFICIAL][OnePlus 9 Pro][13.0.0_r30]Nameless AOSP[2023/03/20]
- Thread starter chandu dyavanapelli
- Start date
I apologise, but I have another query. My ONEPLUS GALLERY APP's dimensions seem little off. The fonts appear very tiny compared to the rest of the apps.
Is there any solution for it?
Is there any solution for it?
As everyone can see that on the left side is OnePlus gallery app having tiny text compared to the Google photos app which is having normal text size.
I am also facing the same issue, u should change resolution from qhd to fhd then it work fine
Bcuz in oos 13 gallery send/share dialog depending on oplus missing class and we are able to implement oplus missing code but unfortunately the share dialog show empty so this is the reason behind for we switch back to oos 12 gallery.
Attachments
@chandu dyavanapelli
I am having Dolby Atoms force close when I click on Dobly Atoms in sounds.
I have cleaned flash on to 1/22 build with F.18 firmware on both slots.
I am having Dolby Atoms force close when I click on Dobly Atoms in sounds.
I have cleaned flash on to 1/22 build with F.18 firmware on both slots.
@chandu dyavanapelli , Were you able to identify the reason for the warning that ''cannot play the video because another app is using the audio'' in apps like twitter and telegram? Basically all A13 roms have this bug, the only one who doesn't have its 29/12/22 version... I really liked the last version 01/22... the battery life is incredible, but I use twitter a lot, and this bug ends up bothering me, and I always go back to the 29/12/22 version..
Dolby works fine for me , I did dirty flash from previous oos13 build.
I noticed the same issue. I think that it`s because another application blocked audio after Close all apps the video in Twitter plays with audio and there is no such message
I have a problem that's bothering me for months now, even after clean installing it last tuesday (due to the OOS13 firmware).
When i put the phone on the wireless OP charger, it always starts in fast mode. For some reason it ignores the "Wireless charger quiet mode", the only fix is to put the phone on the charger, switch the silent mode to off or switch between always/custom, wait a couple of seconds and swith the setting back. If lucky the fan goes off, if not, try again. Asked a couple of times about this on Telegram, but still no fix.
Phone: OnePlus 9 Pro (EU)
Version: TQ1A.230105.002 13.0-20230122-0729
Kernel: stock
Firmware: stock (the one delivered with the latest major upgrade)
When i put the phone on the wireless OP charger, it always starts in fast mode. For some reason it ignores the "Wireless charger quiet mode", the only fix is to put the phone on the charger, switch the silent mode to off or switch between always/custom, wait a couple of seconds and swith the setting back. If lucky the fan goes off, if not, try again. Asked a couple of times about this on Telegram, but still no fix.
Phone: OnePlus 9 Pro (EU)
Version: TQ1A.230105.002 13.0-20230122-0729
Kernel: stock
Firmware: stock (the one delivered with the latest major upgrade)
It only fixes it if you close the application in the recent ones, but after a certain time it happens again.
I went back to version 12/29/22. For me it is the best and most stable.
oh awesome, would the proper step be to flash a global variant of OOS13 than flash nameless afterwards?
Similar threads
- Sticky
Top Liked Posts
-
There are no posts matching your filters.
-
9New build up!
Source changelog
- Added lockscreen shortcuts customization
- Added vertical QS layout
- Added support for showing battery level for AirPods series
- Added more fonts, signal and Wi-Fi icons
- Allow to set lockscreen clock font
- Allow to adjust display's RGB color balance
- Allow to change volume dialog position in landscape mode
- Allow to mute media volumes via alert slider for bluetooth devices
- Allow to disable heads up notification in landscape mode
Device changelog
- Merged LA.UM.9.14.r1-21200-LAHAINA.QSSI13.0 CLO / android11-5.4 lts / ASB-2023-03-05_11-5.4 tags in the kernel
- Updated blobs and firmware from OOS 11.F.21
- Fixed NFC not working properly for some users
- Fixed overheating issue
- Fixed heavy active/inactive drains
- Fixed wired charging randomly gets disconnected
- Fixed wired/wireless warp charging randomly gets slow down
- Fixed random media playback issue in social media apps
Note
- Security patch merge is skipped this month due to huge changes in QPR2. It will come in next month release with April security patch
Gdrive mirror:
Nameless-AOSP_lemonadep-13.0-20230320-0338-Official.zip
Nameless-AOSP_lemonadep-13.0-20230320-0338-Offi...
drive.google.com
1i'm thinking of flashing another rom because the real problems (camera crashing/blurry/black screen, gifs/videos not loading in apps like reddit or twitter, bad bluetooth audio call quality...) don't seem to get fixed. Has anyone had that same experience with other roms? Is it a base problem ?1
In regards to the gif/video issue, on the lineage posts describing this, someone suggested changing this setting in developer options to Disabled. Seems to have worked for me.1
I had this problem as well!! Even after taking logs and searching multiple threads, I could not figure out what was causing it so I switched roms. I have flashed numerous roms since (Stag OS, CrDroid, Lineage OS, Watchdogs, Xtended, etc).
Nameless seems to be the only one with this issue...1
I have been using this rom for 3 months. There are no complaints. Thanks to the developer -
42
Nameless AOSP for OnePlus 9 Pro [lemonadep]
Nameless AOSP is based on Android Open Source Project, inspired by Google Pixel. We offer a smooth and stable experience for your device with a selected set of amazing features that provide an exceptional user experience.
Whats working?
Everything working
Known issues
Nothing yet
You tell me
Flash Instructions
Install LineageOS on lemonadep | LineageOS Wiki
wiki.lineageos.org
Download
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED !
Donate
Chris Chen PayPal
Chandu Dyavanapelli PayPal
UPI ID: [email protected]
Team
Chris Chen - Founder & lead Developer
Chandu Dyavanapelli - Co Founder & lead Developer
Credits
Android Open-Source Project
Pixel Experience
AospExtended
Proton AOSP
LineageOS
Havoc OS
Arrow OS
Krypton
Others, I may have forgot to mention
Stay tuned
Our Telegram Group
- Android OS version: 13
- Security patch level: February 2023
- Build author/Device Maintainer: Chandu Dyavanapelli
- Kernel Source code: https://github.com/chandu078/android_kernel_oneplus_sm8350
- Source code: Nameless AOSP
- Screen Shots: Screenshots
19New build up!
Source changelog
- Merged October security patch (android-13.0.0_r11).
- Added back touch haptic feedback main toggle.
- Added vibration on call connected/disconnected.
- Added long press power to toggle torch.
- Added adaptive playback.
- Added click to take partial screenshot.
- Added more settings options for screenrecorder.
- Added hotspot toggle in QS internet dialog.
- Allow to ignore secure window flag.
- Allow to hide back gesture arrow.
- Allow to reset auto brightness preference.
- Allow to reset battery stats.
- Allow to set screen brightness for ambient display.
- Imported more ring vibration pattern from OOS 11.
- Refactored volume adjustment haptic feedback to Flyme style.
- Make cutout area touchable.
Device changelog
- Updated blobs from LA.UM.9.14.r1-20200-LAHAINA.QSSI13.0.
- Dropped 90Hz refresh rate support.
- Added IFAA support (enable alipay fingerprint payment).
- Added C.63 firmware.
- Minor tweaks and improved haptic feedback and strength.
- Fixed wireless quiet mode charging.
- Fixed warp charging get slow down in some scenarios.
- Fixed dolby atmos crashing on some media content.
- Fixed display flickers in some scenarios.
- Fixed device model show incorrectly for some users.17
I'll walk you through it, the instructions have been so confusing for me but I finally got it working
-Unlock your bootloader
-When you reboot, skip through setup, enable developer options again and re-enable USB debugging
-Boot into fastboot/bootloader (adb reboot bootloader)
From here, you need to download 5 files
- dtbo.img
- vendor_boot.img
- boot.img
- latest version of nameless rom
- copy-partitions-20210323_1922.zip
boot.img and nameless rom are found on the download link in the main post, HERE if you're lazy
copy partitions zip is found HERE
-In fastboot, type these in order
fastboot flash dtbo dtbo.img
fastboot flash vendor_boot vendor_boot.img
fastboot flash boot boot.img
Obviously, if the img files aren't in the root adb.exe folder, then you put the path to the file
E.g - fastboot flash dtbo C:\Users\lol\Desktop\dtbo.img
At this point you've flashed the nameless recovery, and you're still in fastboot. Now you need to boot into the recovery.
-Press the volume down button twice so it says "recovery mode" at the top, then press the power button. You're now booting into the recovery.
-In the recovery, select "Apply Update", then "Apply from ADB"
-On your PC, type in 'adb sideload copy-partitions-20210323_1922.zip' (Or whatever you've named the copy-partitions zip)
This is a script that will copy everything from the current slot into the inactive slot. You NEED to do this if you haven't flashed your OOS update twice. Might as well do it anyway just in case.
-After it's done, click the back button on the top left and get back to the main screen
-Click advanced, then reboot to recovery
-Once it reboots into recovery again, click factory reset and follow the instructions
-When you've factory reset, go back to the main screen again, and go to "Apply Update", then "Apply from ADB" again like you did before
-Type 'adb sideload nameless.zip' (nameless.zip being the rom, type whatever you've called it, and yes you can rename the zip files for ease)
-Reboot
-Enjoy
NOTE:
If you use windows powershell, you might get a 'cannot read' error when flashing the rom
Try using command prompt instead
When you flash, it might appear as if it's frozen (it was stuck at 47% for me), don't touch it, just leave it and it will install just fine.
If no devices are showing up in fastboot, use this tutorial HERE17Hello everyone,
We're very excited to release Nameless-AOSP based on Oxygen OS 13 firmware to the OnePlus 9 and 9 Pro device.
Changelog:
* Merged January security patch
* Fixed mobile data QS tile behavior
* Nameless Launcher: Allow to hide search bar in app drawer
* Nameless Launcher: Fixed search app not working
* Nameless Launcher: Removed "Hide status bar" for now
* Minor cleanup and improvements
Before flashing Nameless-AOSP, we highly recommended to follow below steps
Flash instruction
* Download dtbo, boot and vendor_boot images
* Flash images in fastboot mode
* fastboot flash dtbo dtbo.img
* fastboot flash boot boot.img
* fastboot flash vendor_boot vendor_boot.img
* Reboot to recovery mode
* Install update > ADB sideload
adb sideload <filename>.zip
* Do factory reset
* Reboot system
Note:
* Clean flash required
* Switch back to non-unified builds
* Added the F.18 firmware in Nameless-AOSP build so don't worry about updating firmware manually to the latest version, but keep in mind if there are any broken like sensors or other stuff we're recommended to flash Oxygen OS 13 build and flash nameless build.
Download:
OnePlus 9 Pro
OnePlus 9 Pro images16Nameless back
New build up!
Note
- Clean flash recommended
Source Changelog
- Merged May security patch (android-12.1.0_r5)
- Introduce automated sleep mode
- Implement background process killer
- Added preferred network QS tile to quick switch between 4g/5g
- Added expanded volume panel
- Added switch data saver icon
- Added game props for mobile legends
- Added customize tiles layout in QS panel
- Added more hotspot settings (AP Band, Hidden network, Device blacklist etc)
- Added sound QS tile
- Added AdGuard & Cloudflare private DNS providers
- Added Custom carrier label & Carrier label placement
- Added Dora & Weed status bar icons
- Allow alert slider changes in pocket mode
- Allow adding some system apps into app lock list
- Allow to ignore secure flag for windows (Remove screenshot & screenrecord limits)
- Allow to force show media controller in volume dialog
- Allow 2 more columns for qs tiles
- Allow to hide back gesture arrow
- Allow to switch slot in recovery for AB devices
- Disable face enroll on Setup Wizard
- Force fullscreen for Google Dialer
- Use Mi 11 Ultra games prop for mobile Legends
- Refactor updater app
- Fixed random misplaced qs tiles layout
- Fixed unconditional qs panel expansion in settings
- Fixed glitchy charging info on lockscreen
- Fixed auto answer call triggered even after turning off game mode
- Fixed notification overlay spam with old messages in game mode
- Fixed weird lockscreen clock font
- Fixed partial screenshot
- Fixed wireless emergency alerts crash in settings
- Fixed pixel launcher search bar color in light mode
Device Changelog
- Initial Android 12.1/12L build
- Switch to user build
- Switch to los kernel
- Improved FHD+ resolution
- Improved haptic feedback
- Improved battery backup and performance
- Update blobs, configs, props and vendor scripts from LA.UM.9.14.r1-18900-LAHAINA.QSSI12.0
- Update CarrierConfig from OOS 12 LE2121_11.C.48
- Fixed WiFi Display
- Fixed telephony crash on first boot
- Fixed Warp Charging not displaying in lockscreen
- Fixed color modes
- Make slider haptic feedback progressive
- Refactor OnePlusSettings
- Refactor and cleanup device tree and sync latest los changes
