Development [ROM][OOSCAM][OFFICIAL][OnePlus 9 Pro][12.1.0_r22]Nameless AOSP[2022/08/31]

Search This thread

SaIXsealed

Member
Jul 20, 2022
6
0
I tried but it doesn't work, i was already on nameless i had done factory reset to make a clean flash but keep telling me that message
 

xdaxd1996

Member
Jan 21, 2018
12
3
I have a problem with the icon of VOWIFI and VOLTE, they do not change until I turn the wifi off and on, they overlap each other
 

Advali

Senior Member
Aug 1, 2011
169
27
Makati City
Yes I have the same issue. Gotta disconnect the cable and connect it again so it charges fast again. Is there any fix to that ?
Looks like I'll be waiting for the next update before I update to this. Its kinda annoying on the earlier build when I constantly have to unplug and plug the cable just to warp charge. The build I'm using is stable enough for me at the moment.
 

recoskyler

New member
Apr 28, 2017
2
0
Istanbul
Hi,

I've updated the ROM from the previous (C48) version to the latest version by following the steps here exactly, even switched the slot and flashed the dumped ROM stuff. I downloaded the original ROM from the Oxygen Updater app.

After flashing the updated OP9Pro ROM (original, not Nameless), I rebooted into the system and saw that the system was running normally. Then rebooted into recovery once again to sideload the Nameless ROM. I have flashed it for both slots, however, after booting into the system, the Google logo (the last few seconds of the boot up animation) plays repeatedly in intervals of a few seconds, allowing me just enough time to enter my SIM PIN in between the loops.

I installed the last (C48) version by following the instructions below (formatted the system):

I'll walk you through it, the instructions have been so confusing for me but I finally got it working

-Unlock your bootloader
-When you reboot, skip through setup, enable developer options again and re-enable USB debugging
-Boot into fastboot/bootloader (adb reboot bootloader)

From here, you need to download 5 files
  • dtbo.img
  • vendor_boot.img
  • boot.img
  • latest version of nameless rom
  • copy-partitions-20210323_1922.zip
dtbo.img and vendor_boot.img are found HERE
boot.img and nameless rom are found on the download link in the main post, HERE if you're lazy
copy partitions zip is found
HERE

-In fastboot, type these in order
fastboot flash dtbo dtbo.img
fastboot flash vendor_boot vendor_boot.img
fastboot flash boot boot.img

Obviously, if the img files aren't in the root adb.exe folder, then you put the path to the file
E.g - fastboot flash dtbo C:\Users\lol\Desktop\dtbo.img

At this point you've flashed the nameless recovery, and you're still in fastboot. Now you need to boot into the recovery.


-Press the volume down button twice so it says "recovery mode" at the top, then press the power button. You're now booting into the recovery.
-In the recovery, select "Apply Update", then "Apply from ADB"
-On your PC, type in 'adb sideload copy-partitions-20210323_1922.zip' (Or whatever you've named the copy-partitions zip)

This is a script that will copy everything from the current slot into the inactive slot. You NEED to do this if you haven't flashed your OOS update twice. Might as well do it anyway just in case.

-After it's done, click the back button on the top left and get back to the main screen
-Click advanced, then reboot to recovery
-Once it reboots into recovery again, click factory reset and follow the instructions
-When you've factory reset, go back to the main screen again, and go to "Apply Update", then "Apply from ADB" again like you did before
-Type 'adb sideload nameless.zip' (nameless.zip being the rom, type whatever you've called it, and yes you can rename the zip files for ease)
-Reboot
-Enjoy

NOTE:
If you use windows powershell, you might get a 'cannot read' error when flashing the rom
Try using command prompt instead

When you flash, it might appear as if it's frozen (it was stuck at 47% for me), don't touch it, just leave it and it will install just fine.

If no devices are showing up in fastboot, use this tutorial HERE

Is there a way to fix this issue without formatting?

Thank you in advance
 

ekin_strops

Senior Member
Apr 29, 2016
1,269
530
Munich
OnePlus 9 Pro
Hi,

I've updated the ROM from the previous (C48) version to the latest version by following the steps here exactly, even switched the slot and flashed the dumped ROM stuff. I downloaded the original ROM from the Oxygen Updater app.

After flashing the updated OP9Pro ROM (original, not Nameless), I rebooted into the system and saw that the system was running normally. Then rebooted into recovery once again to sideload the Nameless ROM. I have flashed it for both slots, however, after booting into the system, the Google logo (the last few seconds of the boot up animation) plays repeatedly in intervals of a few seconds, allowing me just enough time to enter my SIM PIN in between the loops.

I installed the last (C48) version by following the instructions below (formatted the system):



Is there a way to fix this issue without formatting?

Thank you in advance
What issue? What ROM are you currently ON?
 

recoskyler

New member
Apr 28, 2017
2
0
Istanbul
What issue? What ROM are you currently ON?
I'm currently on Nameless ROM, the latest build. And as for the OP build, it should be the C62 version after following the LineageOS Update instructions.

The issue is that the phone boots up, however, it goes into a loop of bootup animations. I can use the phone for about 4 seconds, so I can't really check the current version.

I can't find the boot.img in the SourceForge link?
 
Last edited:

LuckyTheCoder

Member
Jul 7, 2018
29
1
nameless_logo.png

Nameless AOSP for OnePlus 9 Pro [lemonadep]

Nameless AOSP is based on Android Open Source Project, inspired by Google Pixel. We offer a smooth and stable experience for your device with a selected set of amazing features that provide an exceptional user experience.

Whats working?
Everything working :)

Known issues

Nothing yet
You tell me


Flash Instructions

Download
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED !

Donate
Chris Chen PayPal
Chandu Dyavanapelli PayPal
UPI ID: [email protected]


Team
Chris Chen - Founder & lead Developer
Chandu Dyavanapelli - Co Founder & lead Developer

Credits
Android Open-Source Project
Pixel Experience
AospExtended
Proton AOSP

LineageOS
Havoc OS
Arrow OS
Krypton


Others, I may have forgot to mention


Stay tuned
Our Telegram Group

I watched a review on YouTube that stated this apparently maintains the OnePlus Camera & OnePlus settings tab, is this true?
 
  • Like
Reactions: z00man

mayanks15603

Senior Member
Feb 4, 2013
229
125
Lucknow
There seems to be a bug with fast charging. Fast charging only works for sometime and then drops to 500mA. It's really annoying.

+1 on this. I have been observing the same.
Also, almost all the previous bugs reported have been fixed. Great work @chandu dyavanapelli ! Thank you once again.

Bugs:
  • Plugging in the phone for charging when switched off displays no charging screen whatsoever and the phone remains stuck on the oneplus logo.
  • Network speed indicator gets hidden on the status bar when switching between wifi & LTE. Speed indicator is shown when swiping down QS, but remains hidden on the status bar.
    • Temporary fix: Disable & Re-enable Wifi.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 10
    New Build up!

    Apologize for broken build, Anyway happy to share quick hotfix builds :)

    Hotfix changelog:
    - Fixed crash in Face & Fingerprint unlock page
    - Fixed Instagram or other social media apps get signed out in every reboot

    Device changelog:
    - Fixed Slow Charging (if anyone still face slow charging then do re-plug charging cable probably this will be happen when device temperature cross above 40°c)
    - Fixed OPlus Camera crashing in AI ultra clear mode
    - Fixed HDR and LOG submode in movie mode having random Green / Pink screen in recorded videos
    - Fixed Long Exposure mode not working for some users
    - Merged Linux stable 'v5.4.211' tag in kernel
    - Merged CodeLinaro OSS "LA.UM.9.14.r1-20200-LAHAINA.QSSI13.0" tag in kernel
    - Improved idle drain
    2
    Any idea how to stop Warp Charging from disabling? I'm on the latest build and it Warp Charges for a while, I then come back to my phone and it only says "Charging: 3 Hours remaining", I have to un plug and plug it back in to get Warp Charge working again.
    2
    More than likely you do not have the latest stock firmware on both slots on your device. I had the same issue and after flashing the copy partitions, which put it on both slots, the problem went away.
    You don't need to flash copy-partition zip if you sideload c62 fw zip. It automatically flashes both slots. Also, just sideload the update.zip again. Touch should work after.
    2
    Hi, i`m on cDroid 8.7, A12. Can i go on with flash the downloaded image files and so on?
    If you flashed the c62 zip from the group, all you have to do is adb sideload the rom, wipe in recovery and reboot. No need to flash stock files first. 😎
    2
    This CPU throttling test is proof of how awesome this ROM is. No compromise on performance. Kudos to the dev. Please be active in updating this ROM
    Screenshot_20220908-140718_CPU Throttling Test.png
  • 39
    nameless_logo.png

    Nameless AOSP for OnePlus 9 Pro [lemonadep]

    Nameless AOSP is based on Android Open Source Project, inspired by Google Pixel. We offer a smooth and stable experience for your device with a selected set of amazing features that provide an exceptional user experience.

    Whats working?
    Everything working :)

    Known issues

    Nothing yet
    You tell me


    Flash Instructions

    Download
    DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED !

    Donate
    Chris Chen PayPal
    Chandu Dyavanapelli PayPal
    UPI ID: [email protected]


    Team
    Chris Chen - Founder & lead Developer
    Chandu Dyavanapelli - Co Founder & lead Developer

    Credits
    Android Open-Source Project
    Pixel Experience
    AospExtended
    Proton AOSP

    LineageOS
    Havoc OS
    Arrow OS
    Krypton


    Others, I may have forgot to mention


    Stay tuned
    Our Telegram Group

    16
    Nameless back :)

    New build up!

    Note
    - Clean flash recommended

    Source Changelog
    - Merged May security patch (android-12.1.0_r5)
    - Introduce automated sleep mode
    - Implement background process killer
    - Added preferred network QS tile to quick switch between 4g/5g
    - Added expanded volume panel
    - Added switch data saver icon
    - Added game props for mobile legends
    - Added customize tiles layout in QS panel
    - Added more hotspot settings (AP Band, Hidden network, Device blacklist etc)
    - Added sound QS tile
    - Added AdGuard & Cloudflare private DNS providers
    - Added Custom carrier label & Carrier label placement
    - Added Dora & Weed status bar icons
    - Allow alert slider changes in pocket mode
    - Allow adding some system apps into app lock list
    - Allow to ignore secure flag for windows (Remove screenshot & screenrecord limits)
    - Allow to force show media controller in volume dialog
    - Allow 2 more columns for qs tiles
    - Allow to hide back gesture arrow
    - Allow to switch slot in recovery for AB devices
    - Disable face enroll on Setup Wizard
    - Force fullscreen for Google Dialer
    - Use Mi 11 Ultra games prop for mobile Legends
    - Refactor updater app
    - Fixed random misplaced qs tiles layout
    - Fixed unconditional qs panel expansion in settings
    - Fixed glitchy charging info on lockscreen
    - Fixed auto answer call triggered even after turning off game mode
    - Fixed notification overlay spam with old messages in game mode
    - Fixed weird lockscreen clock font
    - Fixed partial screenshot
    - Fixed wireless emergency alerts crash in settings
    - Fixed pixel launcher search bar color in light mode

    Device Changelog
    - Initial Android 12.1/12L build
    - Switch to user build
    - Switch to los kernel
    - Improved FHD+ resolution
    - Improved haptic feedback
    - Improved battery backup and performance
    - Update blobs, configs, props and vendor scripts from LA.UM.9.14.r1-18900-LAHAINA.QSSI12.0
    - Update CarrierConfig from OOS 12 LE2121_11.C.48
    - Fixed WiFi Display
    - Fixed telephony crash on first boot
    - Fixed Warp Charging not displaying in lockscreen
    - Fixed color modes
    - Make slider haptic feedback progressive
    - Refactor OnePlusSettings
    - Refactor and cleanup device tree and sync latest los changes
    16
    I Updated to C.48, so what do I do next? Any help would be greatly appreciated

    I'll walk you through it, the instructions have been so confusing for me but I finally got it working

    -Unlock your bootloader
    -When you reboot, skip through setup, enable developer options again and re-enable USB debugging
    -Boot into fastboot/bootloader (adb reboot bootloader)

    From here, you need to download 5 files
    • dtbo.img
    • vendor_boot.img
    • boot.img
    • latest version of nameless rom
    • copy-partitions-20210323_1922.zip
    dtbo.img and vendor_boot.img are found HERE
    boot.img and nameless rom are found on the download link in the main post, HERE if you're lazy
    copy partitions zip is found
    HERE

    -In fastboot, type these in order
    fastboot flash dtbo dtbo.img
    fastboot flash vendor_boot vendor_boot.img
    fastboot flash boot boot.img

    Obviously, if the img files aren't in the root adb.exe folder, then you put the path to the file
    E.g - fastboot flash dtbo C:\Users\lol\Desktop\dtbo.img

    At this point you've flashed the nameless recovery, and you're still in fastboot. Now you need to boot into the recovery.


    -Press the volume down button twice so it says "recovery mode" at the top, then press the power button. You're now booting into the recovery.
    -In the recovery, select "Apply Update", then "Apply from ADB"
    -On your PC, type in 'adb sideload copy-partitions-20210323_1922.zip' (Or whatever you've named the copy-partitions zip)

    This is a script that will copy everything from the current slot into the inactive slot. You NEED to do this if you haven't flashed your OOS update twice. Might as well do it anyway just in case.

    -After it's done, click the back button on the top left and get back to the main screen
    -Click advanced, then reboot to recovery
    -Once it reboots into recovery again, click factory reset and follow the instructions
    -When you've factory reset, go back to the main screen again, and go to "Apply Update", then "Apply from ADB" again like you did before
    -Type 'adb sideload nameless.zip' (nameless.zip being the rom, type whatever you've called it, and yes you can rename the zip files for ease)
    -Reboot
    -Enjoy

    NOTE:
    If you use windows powershell, you might get a 'cannot read' error when flashing the rom
    Try using command prompt instead

    When you flash, it might appear as if it's frozen (it was stuck at 47% for me), don't touch it, just leave it and it will install just fine.

    If no devices are showing up in fastboot, use this tutorial HERE
    14
    As per OP request, thread closed
    Thread re-opened on request of OP @chandu dyavanapelli
    13
    New build up!

    Oxygen OS 12 C.63 firmware not a mandatory. New build work on C.61/62 firmware

    Source changelog
    - Fixed CTS not passing
    - Avoid handling power button torch action in pocket mode
    - Allow some system apps to be added into game mode quick launch apps
    - Fixed in-game freeform window size when app is protected by App Lock

    Device changelog
    - OnePlus Camera & Gallery from Oxygen OS 12 C.63 have been fully ported :)
    - Updated blobs from Oxygen OS 12 C.63