[ROM][OP3/OP3T][10]LuisROM Android 10 based on crDroid V6.x
- Thread starter 8224Freak
- Start date
You can use Magisk and the MagiskHideProbs. This is working fine for Pay and Banking Apps.
Cu Frank
Rom Is very smooth and looks stable, even if I flashed it just a few hours ago. For those who are interested, Safety Net passes with Magisk 21.2, Magisk hide and hiding Magisk Manager without further actions, and so Gpay and banking apps work. I'm missing the option to swap hardware buttons.
Two issues found until now: Android Auto doesn't work (phone isn't recognized by car by plugging in, and then phone freezes - even by enabling transfer file as default option in dev settings) and hotspot doesn't work (turns immediately off after being turned on). Otherwise battery life is good.
@8224Freak - can you check out the builds on your server? There's no v7.2 build, and the v7.2 OTA build is only 54Mb... But can't be downloaded anyway...
18FEB21 EDIT: v7.3 is up, but won't boot. Running a saved copy of 7.1.
Tim
18FEB21 EDIT: v7.3 is up, but won't boot. Running a saved copy of 7.1.
Tim
Last edited:
v7.3 0226 Build won't boot, it sends me directly to fastboot - flashed from SHRP 2.3 based on TWRP 3.4.0-0.
Damn. That's a real shame, as the 6.X versions of this ROM have been head and shoulders above everything else...
I did a little digging around: the LuisROM CRDroid 6.15 and the Official CRDroid 6.13 are the same size -- however, the 7.4 LuisROM is about 15MB smaller than the Official 7.2 ROM, so I'm guessing there's a big chunk missing that's responsible for the FastBoot bootloop...
Here's hoping @8224Freak comes up with a solution!
Tim
I did a little digging around: the LuisROM CRDroid 6.15 and the Official CRDroid 6.13 are the same size -- however, the 7.4 LuisROM is about 15MB smaller than the Official 7.2 ROM, so I'm guessing there's a big chunk missing that's responsible for the FastBoot bootloop...
Here's hoping @8224Freak comes up with a solution!
Tim
Similar threads
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
27My LuisROM based on cdDroid V6.x for Oneplus 3/3T (oneplus3)
Code:*** Disclamer /* * Your warranty is now void. * * We are not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at us for messing up your device, we will laugh at you. * */
This is my personal custom rom. LuisROM based on the crDroid, LineageOS and other...
This is a ROM that works on OnePlus 3 and 3T (oneplus3) only! This ROM comes with a highly-customized kernel, as well as some other very custom modifications.
I will NOT provide support if you install a custom kernel!
Changelogs: http://luis-builds.de/downloads/lineageos/cr/oneplus3/changelog_oneplus3.txt
Introduction
Hello Friends!
I had troubles to find current builds for my devices so I decided to make regular builds for my devices. When my friends told me about similar problems, I extended the builds to include their devices as well. So these builds were and are mainly for my friends and me, but I finally decided to provide them also for public download.
My ROMs
My LuisROM an awesome combination of performance, customization, power and the most new features, brought directly to your device. The LuisROM build server generates automaticly every 2nd days new builds directly from the sources.
Notice
Sometimes I get a lot of help or feature requests from users of my LuisROMs. My dog Luis and I try to fulfill most of the wishes, but that is not always possible. I do that as a little hobby and Luis does not always want to build ROMs
. Please understand if I can not always answer directly.
ROM features:
- Based on the latest cdDroid V6.x (Android 10), LineageOS and AOSP sources
- Latest security patches and sources
- OTA Updater
- Compatible with EX Kernel Manager
- Many other misc. performance and stability improvements under the hood
Kernel: Linux 3.18.x Kernel with many mods other devs and me (thanks for your incredible work!)
- Removed lots of excessive bloat (improves security and performance)
- Improved stability (several bugs not listed here have been fixed)
- Boeffla Wakelock blocker driver V1.1.0
- More I/O-Schedulers (fiops, sio, zen, maple)
- Optimized for performance and battery life
- Fast charging
- Compatible with systemless root (recommend Magisk 20.x !!!)
- Many other misc. improvements not listed here
Installation instructions:
Pre-installation:
- TWRP of course (download here)
- Tested with Oxygen OS 9.0.6 firmware. (download here)
- Magisk 20.x and above (Link) can also be used just make sure you flash it after a first successful boot (after passed setup screen)
First time installation:
- Unlock your bootloader
- Install Oxygen OS firmware (tested 9.0.6)
- Flash recovery zip (TWRP)
- Flash my latest LuisROM (download here)
- Optional: Flash Open GApps and Magisk 20.x and above
- Reboot and enjoy
OTA App update installation (auto):
- Go to crDroid > About cdDroid > Updates
- Press reload button (right corner)
- Select download on the new build list
- After download select update/flash new build
- Optional: Installed gapps and magisk will be moved into new system automaticaly !
TWRP update installation (manual):
- Download latest LuisROM build (download here)
- Boot into Recovery TWRP
- Flash my updated LuisROM (download here)
- Reboot and enjoy
Download
- Oneplus 3/3T builds: (http://luis-builds.de/downloads/lineageos/cr/oneplus3/)
- Oneplus 3/3T firmware: (oneplus official download)
- My other devices/ROMs: (http://luis-builds.de/downloads/lineageos/)
- Download OpenGapps: (http://opengapps.org)
- Flash latest TWRP: (download here)
Changelog
Donate for my dog Luis, he is looking forward to an extra bone:
Known Issus
..
Telegram group:
Thanks To/Credits
Special thanks to Teams:
- LineageOS team: https://www.lineageos.org
- crDroid Team: https://crdroid.net/
- OMNI team https://omnirom.org/about/
- SLIMROMS https://slimroms.org/#/about
- topjohnwu (Magisk) https://forum.xda-developers.com/apps/magisk
Thanks to the best devs on earth:
- LuK1337 (https://forum.xda-developers.com/member.php?u=5075128)
- PeterCxy (https://forum.xda-developers.com/member.php?u=5351691)
- francokernel (https://forum.xda-developers.com/member.php?u=3292224)
- sultanxda (https://forum.xda-developers.com/member.php?u=4800121)
- flar2 (https://forum.xda-developers.com/member.php?u=4684315)
- nathanchance (https://forum.xda-developers.com/member.php?u=6842057)
- zx2c4 for the wireguard vpn ROM Integration (https://forum.xda-developers.com/android/development/wireguard-rom-integration-t3711635)
- dianlujitao (https://github.com/dianlujitao)
- phhusson for some blobs (https://github.com/phhusson)
- and of course to all the supporters.
Thanks for the Sources/Blobs/Tweaks
- crDroid (https://github.com/LineageOS)
- Omnirom (https://github.com/omnirom)
- TheMuppets (https://github.com/TheMuppets)
- dianlujitao (https://github.com/dianlujitao)
My Sources/Blobs/Tweaks
- DEVICE (https://github.com/FraEgg/android_device_oneplus_oneplus3)
- KERNEL (https://github.com/FraEgg/android_kernel_oneplus_msm8996_los)
XDA:DevDB Information
[ROM][OP3/OP3T][10]LuisROM Android 10 based on crDroid V6.x, ROM for the OnePlus 3
Contributors
8224Freak
Source Code: https://github.com/FraEgg
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Oxygen OS 9.0.6
Based On: LineageOS, crDroid, AOSP
Version Information
Status: Beta
Beta Release Date: 2020-03-24
Created 2020-01-26
Last Updated 2020-03-246LuisKERNEL Update: Testing User
Hello Oneplus3 Users !
i have have a updated Kernel 3.18.140 for my oneplus3 LuisROM. But i have at time no device to test this. Can everybody test this build an report my if has issues:
Link: http://luis-builds.de/downloads/lin...-10.0-20200301-oneplus3-v6.3-beta-LuisROM.zip
Thank you !
Cu Frank5
I'm on XDA for several years now and I followed many dev threads. While I agree with you about the fact that the dev doesn't owe us anything I have never understood why some folks create threads and do not post anything... The community is also here to report bugs, suggest new ideas... Opening a thread and discussing should be a win-win.
If posting here is not read by OP then it's like pissing into the wind4
521 here, boot loop still. so i've flashed back to 423 then it revived.:crying:
just waiting it to be back to normal.
