[ROM][P51xx][4.4.4] CyanogenMod 11 (CM11)

Search This thread

Android-Andi

Inactive Recognized Contributor
Mar 3, 2013
10,847
29,252
andi34.github.io
CyanogenMod 11 (CM 11)
Android 4.4.4

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.

I AM NOT THE MAINTAINER FOR THIS DEVICE

Maintainers:
@CodyF86 (inactive)
@codeworkx (inactive)

Code:
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 *
 * Submitting bug reports on nightly builds is the leading 
 * cause of male impotence.
 */

About CM
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

Wiki
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/P5100_Info
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/P5110_Info
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/P5113_Info

Important Information
Be sure you are using latest recovery available for your device!
Official CWM is totally outdated!
More Information and downloads can be found in my recovery threads:
  • TWRP 2.6.3.3 or newer
  • CWM 6.0.4.4 or newer
  • PhilZ NON Touch 6.00.X (Advanced CWM) or newer
  • PhilZ Touch 6.00.x or newer
older Recovery´s can´t flash KitKat-Roms!


!!! READ IT !!! Important Information about the Bootloader
Read all about it here thanks @tetakpatak

Installation
First time installing CyanogenMod 11 to your Galaxy Tab 2, or coming from another ROM:
  • Read the official wiki
  • Copy GApps and CM11.0 ZIPs to your internal SDCard
  • Boot into Recovery
  • wipe data factory reset
  • wipe cache
  • wipe dalvic cache
  • format system
  • reboot your recovery once
  • Flash CM11.0 zip from internal SDCard
  • Flash GApps zip from internal SDCard
  • Reboot
  • Don't restore system data using Titanium Backup!
  • Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!

Upgrading from earlier version of CyanogenMod 11.0:
  • Copy CM11.0 ZIP to your internal SDCard
  • Boot into Recovery
  • Flash CM11.0 zip from internal SDCard
  • Reboot
Maybe it is required to flash the GApps again.

Changelog
p5100: http://changelog.bbqdroid.org/#p5100/cm10.2/next
p5110: http://changelog.bbqdroid.org/#p5110/cm10.2/next
p5113: use p5110 changelog

Important Information for kangers
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!


Information about Unofficial builds by Android-Andi
Please all thanks to @CodyF86 and @daavvis for their repos and for all the help!
Both of them did the biggest part! I am only compileing from source and pickup their commits :p




XDA:DevDB Information
[P51xx] CyanogenMod 11, ROM for the Samsung Galaxy Tab 2

Contributors
Android-Andi, CodyF86, codeworkx
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x

Version Information
Status: Stable

Created 2014-05-20
Last Updated 2015-08-03
 
Last edited:

benno4403

Senior Member
Apr 16, 2010
214
35
#
I have p5100 and willing to test since the other kitkat builds are way too buggy for now

Sent from my GT-P5100 using XDA Premium 4 mobile app
 
  • Like
Reactions: Android-Andi

shakatu

Senior Member
May 31, 2012
1,168
1,137
Cool you figured it out cuz I just haven't had time. I'd be interested in hearing specifically what your build setup was for future reference if you wanna PM me.

Sent from my Nexus 4 using XDA Premium HD app
 
  • Like
Reactions: amyjamy

googlemd

Senior Member
Sep 24, 2012
72
19
Chisinau
Rom is great. Now testing battery life. Only thing i noticed, is that there isn't dual split view like in Mokee 4.4.2. Or it is just a future of Mokee rom?
Maybe i'm wrong but, it seems that scrolling in facebook app is smoother than in Mokee rom. Great Job. Thanks.
Sorry for my english it isn't my native language, i'm Moldovan (Moldova is an European country). :eek:
 

Gregzi

Senior Member
Feb 27, 2011
518
188
On the sunny side of the Alps
Hi Andi,

it seems quite fluid, even in stock frequencies, but I miss ART (I have nothing else but good experience with it at the moment):
- all sensors are working,
- WiFi speed solid,
- Rotation medium smooth,
- Camera working,
- Missing split window, which Mokee has (been told that this a CM thing to implement)
- No Performance Settings available (best version in OMNI rom)

For the start: very good:good:
 

Markox89

Senior Member
Feb 25, 2009
2,386
8,346
Subscribed to the thread, let's see :good:

Sent from my GT-P5110 using Tapatalk
 

cheeseous

Senior Member
Jan 2, 2010
61
15
The external sd card do load! Both internal (after you set it in root mode) explorer and "File manager" that is the one that i use the most.

Sent from my GT-P5110 using xda app-developers app
 

Android-Andi

Inactive Recognized Contributor
Mar 3, 2013
10,847
29,252
andi34.github.io
Hey together! Thanks a lot for all the feedback!

(...)it seems quite fluid, even in stock frequencies, but I miss ART(...)
Can´t you enable ART ? Did you flashe ART-Compatible GApps?

(...)- No Performance Settings available (best version in OMNI rom)(...)
Try Trickster MOD or No frills - i haven´t tryed it on p3110 :p

Only bug is the same on old mokee releases, it won't load the external sd card in file explorers.
Some File-Manager are not compatible with KitKat all the way, e.g. ES Fileexplorer have the same bug - please report it also in the App-Thread or write an Email.
Please try File Manager HD - should work for you ;)

Edit:
I am out of thanks :p i would press the Thanks-Button for everyfeddback, but i am not able to do this :p :D
 

Top Liked Posts

  • There are no posts matching your filters.
  • 101
    CyanogenMod 11 (CM 11)
    Android 4.4.4

    CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.

    I AM NOT THE MAINTAINER FOR THIS DEVICE

    Maintainers:
    @CodyF86 (inactive)
    @codeworkx (inactive)

    Code:
    #include 
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     *
     * Submitting bug reports on nightly builds is the leading 
     * cause of male impotence.
     */

    About CM
    CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    Wiki
    Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/P5100_Info
    Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/P5110_Info
    Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/P5113_Info

    Important Information
    Be sure you are using latest recovery available for your device!
    Official CWM is totally outdated!
    More Information and downloads can be found in my recovery threads:
    • TWRP 2.6.3.3 or newer
    • CWM 6.0.4.4 or newer
    • PhilZ NON Touch 6.00.X (Advanced CWM) or newer
    • PhilZ Touch 6.00.x or newer
    older Recovery´s can´t flash KitKat-Roms!


    !!! READ IT !!! Important Information about the Bootloader
    Read all about it here thanks @tetakpatak

    Installation
    First time installing CyanogenMod 11 to your Galaxy Tab 2, or coming from another ROM:
    • Read the official wiki
    • Copy GApps and CM11.0 ZIPs to your internal SDCard
    • Boot into Recovery
    • wipe data factory reset
    • wipe cache
    • wipe dalvic cache
    • format system
    • reboot your recovery once
    • Flash CM11.0 zip from internal SDCard
    • Flash GApps zip from internal SDCard
    • Reboot
    • Don't restore system data using Titanium Backup!
    • Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!

    Upgrading from earlier version of CyanogenMod 11.0:
    • Copy CM11.0 ZIP to your internal SDCard
    • Boot into Recovery
    • Flash CM11.0 zip from internal SDCard
    • Reboot
    Maybe it is required to flash the GApps again.

    Changelog
    p5100: http://changelog.bbqdroid.org/#p5100/cm10.2/next
    p5110: http://changelog.bbqdroid.org/#p5110/cm10.2/next
    p5113: use p5110 changelog

    Important Information for kangers
    If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
    This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
    Open-Source doesn't meant Out-of-Respect!!!


    Information about Unofficial builds by Android-Andi
    Please all thanks to @CodyF86 and @daavvis for their repos and for all the help!
    Both of them did the biggest part! I am only compileing from source and pickup their commits :p




    XDA:DevDB Information
    [P51xx] CyanogenMod 11, ROM for the Samsung Galaxy Tab 2

    Contributors
    Android-Andi, CodyF86, codeworkx
    ROM OS Version: 4.4.x KitKat
    ROM Kernel: Linux 3.0.x

    Version Information
    Status: Stable

    Created 2014-05-20
    Last Updated 2015-08-03
    17
    Credits / Special Thanks
    @CodyF86 and @daavvis for their repos and for all the help!
    @ CyanogenMod - special thanks @codeworks
    @ketut.kumajaya
    google
    Samsung

    ... and everyone i forgot :p
    17
    Hey @Raghavender !
    I compile this Rom from Time to Time and upload an update.
    I am not a professional Dev and new with bug-fixing etc., but i do my best to bring you a good working CM11 - for a device i don´t own!

    I am working on Omni-Rom too, for P31XX and P51XX as you know (Tab 3 8.0 too) .
    I never had any time to test my Roms on my P31XX because i needed to test my recoverys, answering CM 11 question, answering Omni Question and hat to switch my Rom all the time... that´s sad.

    A clean Build takes 3 hours on my PC.
    I am building OmniRom for 7 Devices now and CM 11 for P5100 and P511X.... as you can see: this takes a lot of time! ~ 27 hours.... maybe 24 hours... idk...

    I only bought a device for 1 of this builds, my P3110... i can not test the other 8 builds and only doing this for our community.

    Please Read the OP, you´ll find the most information there.
    Not all Apps are cmpatible with ART and you need a GApps package witch supports ART too.

    I never tryed ART because i never had Problems on Dalvic.

    I nevery tried Multi-User, i can not answer your question.

    What Keyboard-Bug do you mean? If ou mean on Omni-Rom, maybe it is fixed - but i can not test at the moment.


    About the Bugs? Read the last pages...
    Camera not working (should be fixed in next build i hope).
    IR not working for P5113 - sorry guys... i hope i will fix it for next build.
    numeric keypad for the simcode is a little off - maybe changeing the Rows in launcher Settings will fix it... waiting for feedback. (http://forum.xda-developers.com/showpost.php?p=48867425&postcount=139)


    Thank you all for your Feedback! I´ll do my best ;) :) I am sure you know that :)
    I will run my next Omni-Builds in 30./31.12.2013 - i did a lot of cleanup and hope they build... i have no access to my build PC at the moment...
    if omni won´t build because of my changes i´ll run CM11 first and fix Omni to build in this time :D - if Omni builds - next CM11 in 2014 i think :p
    16
    CM 11.0 - 26th April 2014 Unofficial Release

    Added extras & differents from normal nighly builds

    If you have a keyboard dock, please check if something different to the nightlys (does ist still work?).

    This will be my last unofficial CM build for now.

    A huge thanks goes to @ketut.kumajaya for helping getting native exFAT working, Open source Samsung dock keyboard attach program etc, :) (take a look at the author-ship of the commits)
    Ketut found native exFAT support in @Phil3759 commits when searching for non FUSE exFAT solution. So thanks to him also, including the original author of course

    Download
    You'll find those builds on my androidfilehost:
    All my Files on www.androidfilehost.com