[ROM] PACEfied AmazFit | Huami AmazFit / Xiaomi AmazFit PACE | rel 39 | 1.2.51

[chienkd]

How can I add Vietnamese to this ROM? Thanks.

 

[Danimatos]

Any chances to solve launcher and HmDeskClock not working?
I've followed the instructions to install release 38 on my US Pace, running US Rom 2.8.10, and my watch didn't start, even after updating to rel 39.

 

[lawrnz]

Any chances to solve launcher and HmDeskClock not working?
I've followed the instructions to install release 38 on my US Pace, running US Rom 2.8.10, and my watch didn't start, even after updating to rel 39.

Check OP. He updated the link for Rel 39 because of problems. Maybe you had the old one. Also, factory reset after installation also helps with possible issues after installation.

 

[Danimatos]

Check OP. He updated the link for Rel 39 because of problems. Maybe you had the old one. Also, factory reset after installation also helps with possible issues after installation.

No, I wasn't using the old version.
I used the rel 28, because the full install link was already off, the launcher became broken, updated to rel 29 but the problem remained.
I tried to use adb in order to delete all user data from the watch and nothing, but a factory reset was impossible, because I couldn't start the watch.
Yesterday I tried again, but this time I coudn't get root access, when I upload the temporary root in Fastboot mode, my Pace didn't reboot, I had to do it manually, and when it reboots, no root for me.

 

[p3hdl]

After having massive problems with global rom, I updated my Amazfit Pace to PACEfied 1.2.51. Since this update my watch works quite fine.

There is just one thing that is kind of annoying. Every day I get notifications about a news version 2.6.1.0 with chinese letters. Is it possible to disable this notification?

 

[tr3mm0r]

After having massive problems with global rom, I updated my Amazfit Pace to PACEfied 1.2.51. Since this update my watch works quite fine.

There is just one thing that is kind of annoying. Every day I get notifications about a news version 2.6.1.0 with chinese letters. Is it possible to disable this notification?

2.6.5.0 already out.

 

[LongToeBoy]

Any chances to solve launcher and HmDeskClock not working?
I've followed the instructions to install release 38 on my US Pace, running US Rom 2.8.10, and my watch didn't start, even after updating to rel 39.

Same problem here... I installed zip without adb, with TWRP, thought this was the problem. still trying to figure out the problem

 

[LongToeBoy]

Same problem here... I installed zip without adb, with TWRP, thought this was the problem. still trying to figure out the problem

so, I fixed it. Factory wipe actually worked.
i installed rel 38 with TWRP. had problem "Unfortunately Launcher / HMDeskClock has stopped working"
after installing release 38 with TWRP I again installed it properly with adb (I think it wasn't necessary)
Then made Factory Wipe using

adb shell am broadcast -a android.intent.action.MASTER_CLEAR

restarted, it was chinese. also had problems with pairing.
then updated to release 39. changed lang and everything works fine. so far no errors

 

[arroutada]

Yes, you can program both and even make a mix. You can also create different interval sequences and keep them stored to use on demand

 

[arash_no1]

Still No Persian (Farsi) Support?

 

[ylarissa]

I'm having trouble to remove update notification, in the ADB dont recognize the code and in the Amazmod says "invalid command". How can i solve this? And i can't support this message anymore, she wants update every time that i connect the smartphone on Pace.

 

[The Answer86]

Hey,

please i need help. How can i go back to the original us stock firmware?

 

[leepeetoo]

great Solution..

If you are registered in the CN Dev Program, OTA check will alert when a new Dev ROM version is available. But as mentioned above, trying to update will fail. I am on Dev program and always get notified of new releases. Knowing it won't work, I never try upgrading.

May be you are not registered on Dev Program and App/Watch determines that you are on Stable release and the watch cannot find anything newer than 1.2.32 in the stable ROM path.

Try hitting the below url (use copy/paste and prefix with "https://" and remove the space after appVersion) with your userId and SN (highlighted in Red). This is the URL used to check for new versions. You will probably get {"code":-2001,"message":"Not found"}

api-watch-us.huami.com/devices/WATCH/hasNewVersion?sensorType=ECG&country=CN&appVersion=1.0&userId=0123456789&lang=zh_CN&sn=12345/12345678&sensorVersion=ALL&firmwareVersion=huanghe-1.2.32&appName=com.huami.watch&deviceVersion=Amazfit%20Sports%20Watch

thaxz, that is solution for error code {"code":-2001,"message":"Not found"}

 

[ankur77]

Error while booting with pacified

I'm trying to boot my amazfit pace with pacified but everytime it starts and after a few minutes it just says error

 

[NirHa]

I'm really confused about all the options available for the PACE.
I have a Chinese version that I bought back in 2017 and I just want to have the newest firmware possible in English.
Can someone help with the steps I need to take?

My current firmware is: 2.6.1.0 and it's the A1602 model.

Thank you!

 

[Hugguito]

NOTE: I am currently extremely busy with work. Therefore, I can only irregularly participate here and updates will currently not be on a weekly basis. I will be looking for some support to see, if others can help with preparing new releases.

Dear all

This is a custom ROM for the Huami AmazFit Smartwatch (A1602) and the Xiaomi AmazFit PACE (A1612).
The ROM is fully functional, but may contain bugs.

FEATURES:

• Based on Chinese firmware huanghe-1.2.51 stable firmware
• additional translations:
  - Italian (thanks to Nicola and @N3OMOD)
  - Slovak (thanks to @jasterica and @rbt07(rbarat))
  - Polish (thanks to @Kaudii)
  - Czech (thanks to @zbani and @rbt07(rbarat))
  - Spanish (thanks to @Alain and @saratoga)
  - Russian (thanks to @silver-alx)
  - French (Thanks to ericmo and Cyril)
  - German (Thanks to Klaus H. and others)
  - Hungarian (Thanks to gidano)
  - Brazilian
  - Basque (thanks to @iker)
  - Hebrew (thanks to Uri and @1immortal)
• additional fonts added
  - Hebrew font (thanks to @itsay)
  - Arabic fonts (thanks to @1immortal) -> re-added
  - Tamil fonts (thanks to @madtech360)
  - Thai fonts
  - Khmer fonts (thanks to Piseth)
  - updated fonts for Bidirectional language support with enable/disable function (see FAQ #14)
• English voices in Sports app (thanks to @Fabien)
• Updated tzdata (thanks to Alvaro)
• command to change Bluetooth max volume to maximum (btVolBoost)
• initd system to run customer script upon boot
• new boot animation (thanks to @1immortal)
• BETA (only for testing, maybe not working correctly):
  - first Dutch translation (thanks to Ronny Gyles)
  - Turkish (Thanks to ygecesefa )
  - rootable with su pre-installed (call "root_amazfit" to enable or disable)
• This release is based on the development firmware. We will need to see if it makes sense to follow the development series, as Huami seems to only target the Chinese market with this,

PERMANENT INSTALL:
Please find all information here: https://gitlab.com/Neuer_User/PACEfied_AmazFit/wikis/permanent-install

ATTENTION: You need to have an unlocked bootloader or run on a rooted ROM (such as PACEfied) for installing this ROM.

Community Project code:
The source code used to build the translated apps is available on the following GitLab repo:
https://gitlab.com/Neuer_User/PACEfied_AmazFit
If people want to contribute, log in, have a look around, download the files you want to translate, and send me the translated files, so I can include them.

Downloads:
Rel 39: Full install Version 1.2.51: (pulled because of problems, please use the below Update version)
Update from Rel 38 to Rel 39 (1.2.51): https://mega.nz/#!wc0DHTrI!08jLXgcDLqDkDF2GIPfQxD2uTJIefRG1WGdDgZQgrIA

Older versions:
Rel 38: Full install Version 1.2.50h: https://mega.nz/#!wUlwnLYR!4NhS_tTpakzCpSHDXKiVY34rqFR_slwXpK99QKo-OP8
Update from Rel 37 (1.2.49k) to Rel 38 (1.2.50h): https://mega.nz/#!oYESkbSQ!iLUGiqiTXKWYF6NVbtp8Y3pgrQT94Taz0keSZhwwGo8
Rel 37: Full install Version 1.2.49k: https://mega.nz/#!ZBEGWDxB!yKrjzI9EBzyiRPCZNgzP0q-kDLbQHC81iFTCw0sD-4w
Rel 36: Full install Version 1.2.49k: https://mega.nz/#!9ItxSITT!qGW2fY-fuv_RYVj77NXfyzjx7AOSl83K8y_zrde1ghE
Update from Rel 35 (1.2.48h) to Rel 36 (1.2.49k): https://mega.nz/#!wUcGFLLJ!Pv1Y4BPR1S4HCGfFXzVVunGRnGWcpNTYUYOC2WgGxlo
Rel 35: Full install Version 1.2.48h: https://mega.nz/#!YR8HwbxZ!DK3wV1lT...K!ouUYcONeynyqSzQe7Xx_2gdkXNEPEyN8HbrgTDyTgbE
Rel 33: Full install Version 1.2.47: https://mega.nz/#!hJUw3RpB!6LSm34TNyWPyW_jtxbCZzeGJQD4igwanC_t-sXFA_e4 (unreleased)
Rel 32: Full install Version 1.2.45: https://mega.nz/#!1dEnGDJS!Uv7hD-BThdaDNh2qEdwyQhTzyMRMjsCJ-UsyfVbQwa4
Rel 31: Full install Version 1.2.44: https://mega.nz/#!lQF0DDhb!VwVztDyJdYfxPZC7DmpGVAieDzErANK5aO4St1fuYtw (NOTE: sogoumap not translated in this release!)Rel 30: Full install Version 1.2.41: https://mega.nz/#!lM1ghCwZ!mKHbjGZSSisfETimtT2o9SYOx0Qa_LF9tae--mfUOQI
Rel 29: Full install Version 1.2.39: https://mega.nz/#!FNsyQIhZ!4jbbtfLfv4ZX8qBAtNcB0NPTrxr0ly7pgag8WnqJJs4
Rel 28: Full install Version 1.2.39: https://mega.nz/#!IAs2jAhJ!ngyMtxq_fcPnShNPsfILhra8vbeu4p4-Ut0MO3Fd4GE
Rel 27: Full install Version 1.2.37: https://mega.nz/#!cNUiQJDb!h2qPrfpU9sxGfu2P0JJNtbbpAblJS_FzR2aHp9Lvk44
Update from Rel 26 (1.2.35) to Rel 27 (1.2.37): https://mega.nz/#!5dciWITK!J3MMeYICcKJEYj2qw6KPOzEL9BjdIU9gattN6OVy17g
Rel 26: Full install Version 1.2.35: https://mega.nz/#!UdViVaBS!Fr3B9ECEm8muxQGv9lkOgGh6u40_LblPPaqiWgcE_Nc
Rel 25: Full install Version 1.2.32: https://mega.nz/#!IE8VVTiY!X82gsHbG988z8Kk22raqj_0Vy_tlgUe4or0CjU5SuE4
Rel 24: Full install Version 1.2.29: https://mega.nz/#!ZMcQya4T!9Cl6HU1WNThUONk4QsH8zBAaQizncqiHiPLZsTZ6Kvc
Update from Rel 22 (1.2.26a) to Rel 23 (1.2.27): https://mega.nz/#!AdcxhCiK!GtzvM5zcnxuNFW01Pr8R_DUafPDIR1EkASElnlb8KT8
Rel 23: Full install Version 1.2.27: https://mega.nz/#!dAsFQKhS!Z8Z9L0h9TW_EPy6SbqxUS3c8qNrhefg5rtzG2vSUjf0
Update from Rel 21 (1.2.25) to Rel 22 (1.2.26a): https://mega.nz/#!UJNEHRzA!tC9c3-Mi3xOdAZmgq34kzrqYBb5a5g7krh5ALWdazbc
Rel 22: Full install Version 1.2.26a: https://mega.nz/#!hUVGDQRT!g5SbkBeVPrgX-3DfUzecXA-NAnWYMsYhuWIwpoFHk6w
Update from Rel 20 (1.2.24) to Rel 21 (1.2.25): https://mega.nz/#!RFsBBL7Q!B3xov7FOMKjAi9jkR-UvfINOG_mwEv9-LwjAK4w0iFc
Rel 21: Full install Version 1.2.25: https://mega.nz/#!gIMC2LCC!8ZxFEe0dnCpqfbWwG5a2lC8_IT0wfEw4ccgOV4tiwkM
Rel 20: Full install Version 1.2.24: https://mega.nz/#!YMEA3bZB!76lg9PlvtRAsqBiAOec8ppAJ9xTtMQsTBJLsm0E_icU
Update from Rel 17 (1.2.21c) to Rel 18 (1.2.22): https://mega.nz/#!0ZlgkQ6R!SCx-XCte4sxSA3ws6G3PFyl-XRu63n3xmI7pBDFInVc
Rel 18: Full install Version 1.2.22: https://mega.nz/#!tE1jHSwY!88C4HgJwMLU3kX9pqDgQ2VA8QuVCyisLRvkxba0_57A
Update from Rel 16 (1.2.20) to Rel 17 (1.2.21c): https://mega.nz/#!oJciQTZa!7HjCTlavT8qvKzOCn6D9cX7U_wkFQYONFj2FKS17sUA
Rel 17: Full install Version 1.2.21c: https://mega.nz/#!hIEj2BCL!nEaosNn5VcQLs_7qMQAXAW566Ab5emv5HiJxwsa6tBg
Update from Rel 15 (1.2.19) to Rel 16 (1.2.20): https://mega.nz/#!9VNUXAbL!NtE2yh3nZfd486LGX-ulAv-APmMAwYY98EvLPgDRSSI
Rel 16: Full install Version 1.2.20: https://mega.nz/#!NA1lmajL!CI-R-o5zngN6vxcR20WpXa8vYGq-uk7T974mySmYvTA
Update from Rel 14 (1.2.18) to Rel 15 (1.2.19): https://mega.nz/#!JA8EXahK!mTJNaIHzSPAWKhk1pmCWGoaxbmv__OGiTdhtRKwAt-I
Rel 15: Full install Version 1.2.19: https://mega.nz/#!NV0xTBAY!fNj40JkFBpS-vE7L_EKcou9JS7wPS7WG_rHkKyOaaSk
Update from Rel 13 (1.2.17) to Rel 14 (1.2.18), permanent install: https://mega.nz/#!MNMUXLDT!Y1tpmG_IslYBR-VdvoQjKUJlHNGaJwFcMxix55FjigY
Rel 14: Full install Version 1.2.18, permanent install: https://mega.nz/#!wIUUXYAY!5rjrMiDMC8kV2JapHsaBR6EXJq7HInfR44IVk8HkZjYUpdate from Rel 12 (1.2.16) to Rel 13 (1.2.17), permanent install: https://mega.nz/#!VZcSGAqK!etek35aNnqKDa_h8ze5g2F3TAaVPr05Y0y4gy6uWm7M
Rel 13: Full install Version 1.2.17, permanent install: https://mega.nz/#!xB0FSTqY!SxB5PVtMB0rRLz7Jo46L9Ulj2LYHvu4F6T3P-NNvHmM
Update from Rel 11 (1.2.15d) to Rel 12 (1.2.16), permanent install: https://mega.nz/#!wR1yCCoa!rfg_DdCWz_z3F-V68XKjEbOiPgOoISIP8E7dYgts2Pk
Rel 12: Full install Version 1.2.16, permanent install: https://mega.nz/#!JNNh3Awb!_vMcgK8AGV6xm7Ns6Z8rkSd3te3T3OPCGXqp550mzcc
Update from Rel 10 (1.2.15a) to Rel 11 (1.2.15d), permanent install: https://mega.nz/#!9VVzEDJA!sZk7rFyrC9UDBG7pXpFTFSqL8Cx4lwc5vYtJ_FzxSbw
Rel 10: Full install Version 1.2.15a, permanent install: https://mega.nz/#!ZdMEiSzT!FYXbk_V4I5aigi2dSjL2UBOyBFMc3P4dRT4FkBXJHaw
Update from Rel 9 (1.2.14) to Rel 10 (1.2.15a), permanent install: https://mega.nz/#!cdVHTLAD!xguDxPPwp00K6VP_-So8Vgc9zCMw85doJgANdFbbwtM
Update from Rel 8 (1.2.13) to Rel 9 (1.2.14), permanent install: https://mega.nz/#!BE9DTJTb!h48h6kWAGRaY82-Xw_nMSPsHl4SUcQ9xJH-bhnbCfvs
Rel 9: Full install Version 1.2.14, permanent install: https://mega.nz/#!sMcSHbaY!fhsiKfeyK559328is4KoffNHpVaCX2PmQXuEYxnP32s
Update from Rel 7 (1.2.11c) to Rel 8 (1.2.13), permanent install: https://mega.nz/#!JZlgWDIB!il7-iekOIafLrQLPKZoMwbc0Yr8dT_NeAoukzAiME5Q
Rel 8: Full install Version 1.2.13, permanent install: https://mega.nz/#!IMUyRQxY!7ARUUNhA6UWhkzTEJAN9__P1dOqntZxC8UASf6wsU_Y
Update from Rel 6 (1.2.11) to Rel 7 (1.2.11c), permanent install: https://mega.nz/#!NYUHgbjL!jG0s6XynvtPW-w61UUBDCh0GY7EHyxNvvHCh3901KhU
Update from Rel 5 (1.2.10) to Rel 6 (1.2.11), permanent install: https://mega.nz/#!FB01gIJL!fRIvUALFjCaC7YGB_cxa3XFXF1DS5yZ-Q1iMZI_L5Og
Rel 6: Full install Version 1.2.11, permanent install: https://mega.nz/#!EZt1gTjK!znlhwdsS40N1DrbshWjM7floyiLlScjF3QFwRtGitxo
Rel 5: Full install Version 1.2.10, permanent install: https://www.google.com/url?q=https://mega.nz/#!8c0l3SqL!7JonTIAiH8StsVMez-zyLUkrvWqmZ03OielcNlRMwxk&sa=D&sntz=1&usg=AFQjCNG4Km1GaXmW0iY3hAcm6OEc9Czz2Q
Rel 5: Full install Version 1.2.10, temporary install: https://mega.nz/#!VVlykaLS!WiOPDP-dFbB_o_r49Q7YO-iSUnrzs3L8POgLcJhDqFE
Update from Rel 4 (1.2.9) to Rel 5 (1.2.10), permanent install: https://www.google.com/url?q=https://mega.nz/#!sFV2EL6C!cfAW9eJxvkprNK29qxmJ6t_-bVv__BD9n9JeTZH_hPg&sa=D&sntz=1&usg=AFQjCNHTnJrNQ39QSLqJ_d5zUfmugw3XUA
Update from Rel 3 (1.2.8) to Rel 4 (1.2.9), permanent install: https://mega.nz/#!BdMCAbTJ!59vxmcKqSEqvCIKMYvLHteVE03xLb-oZCbc5PE5loEY
Rel 4: Full install Version 1.2.9, permanent install: https://mega.nz/#!gY0FhRiL!DLTnnuyy36KK8497zZ6jxW1k5KA9skTxpnfCxdhBWUs
Rel 3: Version 1.2.8, permanent install: https://mega.nz/#!lMExkATK!4ZOqX5GKJg_-GpGdPlMP0Q8igkpTAoQ1UpkWcxQZ0N4
Rel 3: Version 1.2.8, temporary install: https://mega.nz/#!UJkTwAbJ!HV57w7-x4kI99ix8SVmdp5RAXHtJ4n-w0WND26y8IhQ
Rel 2: Version 1.2.7, permanent install: https://mega.nz/#!wM9l1BxT!zauHlRWWQn2uqqZ-vvLzvfGvpTl6BleJOzkrtONzq10
Rel 1: Version 1.2.6c, temporary install: https://mega.nz/#!RB0wXK7T!h3DxA5ptWqwnfZzAON212D4BClgxNi3jp6HFPMFZaAw
Rel 1: Version 1.2.6c, permanent install: https://mega.nz/#!lU0SGbAJ!gaKB-sKboy-UfmzcqyLwB9OSnuzYnd7Bb6zDZ_xVOu0
Version 1.2.6b, temporary install: https://mega.nz/#!IEU11CiB!wU11MkyoZ051e5jl367meDmIswVBHtZ2kix90OnKK5Q
Pre-release version 1.2.5a, temporary install: https://mega.nz/#!kZchDS7b!PF0GP5ML_jLYt3FiG3ydet5q8mPzN_-wOHihbjKKh1I

Tks, Checking
Can anyone tell me if there's a piece missing from the power button?