[ROM][PIE][GUIDE] How to install pie (Stock + Treble AOSP)

[LameMonster82]

Getting an error about 58% into the flash.

And the original command I'm posting is

I'm guessing it's the LGUP_Common.dll file. Every time I try to extract it on Windows, it throws me an error (0x80004005), but when I use 7zip, the file extracts normally.

Looks like a corrupt kdz. Try redownloading it and see if it continues to give you that error

 

[sahil27]

Yeeeeeeeeeeeeeeeees
LG G710EAW on android PIE
Working LTE
Now i have the LGu+ carrier bloatware but doesnt bother that much.
Are there clean korean firmwares? like no carrier ones?
Also I got Call Recording ... yeeeeees They allow it in Korea?
check photo
IDK how it is on 4GB ram lg g7 , but on my 6GB - 128 GB it goes SUPER SONIC!:highfive::good::silly::victory:

I am getting error
LG up is not recognized as internal or external command

 

[LameMonster82]

I am getting error
LG up is not recognized as internal or external command

Can you post the command you used?

 

[mekeke]

Looks like a corrupt kdz. Try redownloading it and see if it continues to give you that error

Redownloaded it and tried again. It's still failing around 57%.

C:\Program Files (x86)\LG Electronics\LGUP>lgup_cmd.exe com3 "C:\Program Files (x86)\LG Electronics\LGUP\model\common\LGUP_Common.dll" "C:\Users\devio\desktop\G710N20c_00_LGU_KR_OP_0107.kdz"
Selected Port : COM0
DLL Path : C:\Program Files (x86)\LG Electronics\LGUP\model\common\LGUP_Common.dll

Subject Name: LG Electronics Inc.
The file "???????????????????????????????????l??????5" is signed and the signature was verified.

Subject Name: LG Electronics Inc.
The file "???????????????????????????e" is signed and the signature was verified.

Subject Name: LG Electronics Inc.
The file "???????????????????????????e" is signed and the signature was verified.
START LAF Download.
No CUPSS Model.!!!
Download Info Check OK.
Initializing
1%
2%
3%
4%
USB Connection Established
_prepareAfterDload download
Anti Rollback Status = E.

Anti Rollback Check PASS.

11%
vendor_b
system_b
system_b
system_b
system_b
12%
system_b
13%
system_b
system_b
14%
15%
system_b
16%
17%
system_b
system_b
18%
19%
system_b
20%
21%
system_b
system_b
22%
system_b
system_b
system_b
system_b
system_b
system_b
system_b
system_b
23%
system_b
xbl_b
xbl_config_b
aop_b
tz_b
hyp_b
modem_b
24%
abl_b
dsp_b
keymaster_b
akmu_b
boot_b
cmnlib_b
cmnlib64_b
devcfg_b
qupfw_b
laf_b
25%
vbmeta_b
dtbo_b
storsec_b
raw_resources_b
sid_b
persist
oem_a
vendor_a
vendor_a
26%
vendor_a
vendor_a
27%
vendor_a
28%
vendor_a
vendor_a
29%
vendor_a
30%
vendor_a
vendor_a
31%
vendor_a
vendor_a
vendor_a
32%
vendor_a
system_a
system_a
33%
system_a
system_a
34%
system_a
35%
system_a
system_a
36%
system_a
37%
38%
system_a
system_a
39%
system_a
40%
41%
system_a
system_a
42%
system_a
43%
system_a
system_a
44%
system_a
45%
46%
system_a
47%
system_a
48%
system_a
49%
50%
system_a
51%
system_a
52%
53%
system_a
54%
system_a
55%
system_a
56%
system_a
57%
system_a
0x2000, Invalid command response code = 0x80000202
Error! Click here to continue.
DoDownload Error!!!

I'll try to re-download it one more time and see if it still fails.

 

[LameMonster82]

Redownloaded it and tried again. It's still failing around 57%.

I'll try to re-download it one more time and see if it still fails.

That's funny. What model is your phone? I know that the T-Mobile version can have some problems but never got confirmed. Try flashing a kdz for your model while I try to find out what's going on

Update: the error seems to be saying that it was decompress fail witch doesnt make any sense

 

[mekeke]

That's funny. What model is your phone? I know that the T-Mobile version can have some problems but never got confirmed. Try flashing a kdz for your model while I try to find out what's going on

I've got the US unlocked model. G710ULM
Edit: When I download the common zip on safari on MacOS it also says the same thing. Decompress fail

 

[LameMonster82]

I've got the US unlocked model. G710ULM

Ok. And also i got a message on telegram about the same problem with the same model. I guess ULM flashing doesnt work. Im sorry that you had to go through this trouble and i hope that you can flash back to stock for now.

 

[Inerent]

I've got the US unlocked model. G710ULM
Edit: When I download the common zip on safari on MacOS it also says the same thing. Decompress fail

Have you installed newer lgup over the old one?

 

[mekeke]

Ok. And also i got a message on telegram about the same problem with the same model. I guess ULM flashing doesnt work. Im sorry that you had to go through this trouble and i hope that you can flash back to stock for now.

Oh well. At least I know it's not just me. I'm flashed back to stock now. Thanks for your help :highfive:

Have you installed newer lgup over the old one?

No, it was a fresh install of LGUP on a fresh install of Windows 10. I was running it on a virtual machine with a MacOS host.

 

[sahil27]

Can you post the command you used?

lgup_cmd.exe com6 "C:\Program Files\LG Electronics\LGUP\model\common\LGUP_Common.dll" "F:\Extra\Extra\LG G7 Firmware\G710NO20c_00_OPEN_KR_OP_0107.kdz"

 

[LameMonster82]

lgup_cmd.exe com6 "C:\Program Files\LG Electronics\LGUP\model\common\LGUP_Common.dll" "F:\Extra\Extra\LG G7 Firmware\G710NO20c_00_OPEN_KR_OP_0107.kdz"

Are you on Windows 8 or 10? Run "cmd" before running this command

 

[sahil27]

Are you on Windows 8 or 10? Run "cmd" before running this command

I am on windows 7, i already try cmd before running, but it won't work, its still showing that lgup_cmd.exe is not recognized as internal or external command, please help me out

 

[LameMonster82]

I am on windows 7, i already try cmd before running, but it won't work, its still showing that lgup_cmd.exe is not recognized as internal or external command, please help me out

Have you gone to lgup folder and opened CMD there?

 

[LameMonster82]

I've got the US unlocked model. G710ULM
Edit: When I download the common zip on safari on MacOS it also says the same thing. Decompress fail

Are you by any chance on Windows 7 32 bit?

 

[mekeke]

Are you by any chance on Windows 7 32 bit?

No, I'm running Windows 10 64 bit

 

[LameMonster82]

No, I'm running Windows 10 64 bit

Ok. Can you try on another pc?

 

[Inerent]

I am on windows 7, i already try cmd before running, but it won't work, its still showing that lgup_cmd.exe is not recognized as internal or external command, please help me out

This is the error I had for not typing cmd first. Try with power shell or admin mode.

 

[mcslender97]

It should still work

I know it doesn't work on normal ULM models, but I have one of those eBay PM models octoboxed to ULM (IMEI shows PM models. Do you think I can flash successfully to stock Pie with no problem?

 

[kacak11]

Phone hard bricked with corean Pie

I got this procedure and the phone is (hard bricked) Showing as Qualcom 9008. My model is LG G710 TM, flashing normal and finally the phone did not light up, here in the forum I read that has been successful but is not really, please most responsive to what you write.

 

[LameMonster82]

I got this procedure and the phone is (hard bricked) Showing as Qualcom 9008. My model is LG G710 TM, flashing normal and finally the phone did not light up, here in the forum I read that has been successful but is not really, please most responsive to what you write.

Have you done anything while installing the firmware? Sounds like something went wrong.