[ROM][PMEM+ION] CyanogenMod 10.2 - Jellybean 4.3.1 - 04-February - UNOFFICIAL

Search This thread

johnnyslt

Inactive Recognized Developer
Sep 10, 2010
1,381
6,262
Bucharest
CyanogenMod 10.2 - Android 4.3.1 - Jellybean - Unofficial



THWtPYr.jpg


CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3.1 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.

Code:
#include 
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/

FEATURES:
  • Built from CM source
    [*]MiRaGe Kernel compiled from source ( 10x @mrg666 )
    [*]Kernel overclockable up to 1728 Mhz
    [*]Service
    [*]Text
    [*]Data
    [*]Calls
    [*]Audio
    [*]WiFi
    [*]Bluetooth
    [*]Google Now
    [*]GPS
    [*]MMS
    [*]VoIP
    [*]Latest Mako Qualcomm JB libs & firmware
    [*]Video playback
    [*]Audio playback
    [*]Camera
    [*]Camcorder
    [*]Tethering ( WIFI, USB & BT)
    [*]Control over button backlight power ( Settings > Buttons > Backlight )
    [*]Change button backlight timeout ( Settings > Buttons > Backlight )
    [*]Control over haptic feedback power ( Settings > More options > Vibrator intensity )
    [*]Sweep2Wake




BUGS / NOT WORKING:


  • 3D recording not working
    [*]Ocazional data drops.
    [*]In-call volume sometimes gets reseted to maximum. Temporary fix:ENABLE TOUCH SOUNDS
    [*]Camcorder: When recording video, sometimes first video will not work, the second one should be OK.
    [*]Sending MMS's might not work for everybody (receiving works) !
    [*]Bluetooth tethering might not work from the first time



SCREENSHOTS:
1eVMq.png
1eVMt.png
1eVMw.png
1eVMz.png
1eVME.png
1eVFy.png



RECOMANDATION:

  • Do not use superwipes
    [*]Required HBOOT : 1.49.xxxx
    [*]S-OFF
    [*]Radio/baseband : 11.77.3504.00P_11.25.3504.06_M get it from HERE
    [*]4ext recovery


If you have spontaneous reboots, check that you have the required radio version in BOOTLOADER not in SETTINGS -> ABOUT PHONE

Follow these exact steps to install the ROM :

If coming from an other ROM do this :

  • 1. Wipe data, cache, and system (wipe all partitions except sdcard if on 4ext recovery) if coming from any other ROM
  • 2. Flash ROM
  • 3. Flash GAPPS
  • 4. Reboot
  • 5. ???
  • 6. Profit

If coming from previous build of CM10.2 to this :

  • 1. Wipe cache and dalvik-cache
  • 2. Flash ROM
  • 3. Flash GAPPS
  • 4. Reboot
  • 5. ???
  • 6. Profit


  • To enable Developer Options and Performance go to Settings > About Phone and repeatedly press Build Number.
  • If you have a problem with ADB, update your android-sdk to latest version.
  • To enable Advanced reboot menu got Settings > Developer Options > check Advanced reboot




Thanks to:

  • Agrabren
    [*]Dastin1015
    [*]mrg666
    [*]sultanxda
    [*]Everyone who contributes to CM as this is based on their hard work!
    [*]Helicopter88
    [*]LaidbackNikez
    [*]sjoerd0301
    [*]Bigwillyg
    [*]Evervolv Team
    [*]GOO.IM TEAM




Issues tracker:

Please use this issues tracker HERE, if you want to help fixing bugs.
Logs are needed (logcat / dmesg / last_kmsg / screenshots), not just "got FC", "it's not working", "+1" or useless replies.


beer.gif
 
Last edited:

johnnyslt

Inactive Recognized Developer
Sep 10, 2010
1,381
6,262
Bucharest
CHANGELOG & DOWNLOAD :

{ 04 February }

  • Cm updates from upstream (as of today at 10:00) : here

    Kernel:

    CLEAN INSTALL RECOMMENDED ! ! ! if you have any problems...

    DOWNLOAD : HERE MD5: bacaf09f329072ddbe8a7138f4584a05

    MIRROR

Older releases:


{ 27 December }

  • Cm updates from upstream (as of today at 13:00) : here

    Rom:
    • Rom is now half PMEM and half ION (10x: blefish, sultanxda, paulb-nb)
    • No more graphical glitches in Maps app (because of ION)
    • Added support for f2fs
    • Upstream CM-10.2 changes



    Kernel:
    • Kernel now has a hybrid memory allocation (ION for display, PMEM for camera) (10x: blefish, sultanxda, paulb-nb)
    • Available RAM is 812MB (credit: sultanxda)
    • Enabled SELinux support


    CLEAN INSTALL RECOMMENDED ! ! !

    DOWNLOAD : HERE MD5: 4b101cd273c1ae51d8fa339def19e6a4

    MIRROR
    MIRROR 2
{ 10 November }

  • Cm updates from upstream (as of today at 23:00) : here

    Rom:
    • shooteru: disable HDMI services
    • Camera: Added auto-exposure settings



    Kernel:
    • ARM: entry: avoid enabling interrupts in prefetch/data (fixed reboots)
    • msm: spm: Allow setting of voltages across cpus


    If you any issues please make a clean install before reporting !

    DOWNLOAD : HERE MD5: afe572da8bf417285e86ca3a12dff31c

    MIRROR
    MIRROR 2


{ 27 October }

  • Cm updates from upstream (as of today at 11:00) : here

    Rom:
    • Update Torch overlay
    • Run qcom-post-boot script only once
    • Use a2dp tuning (min CPU freq set to 432Mhz during a2dp playback) - needs testing for fine tunning
    • Enable Bluetooth LE
    • Fix front cam switching
      [*] Added Facebook hack for contacts syncing
    • Viper4android dsp should be fixed
    • Added back Sweep2Wake support



    Kernel:
    • power: fbearlysuspend: add sleep hack for CRT-off animation
    • sched: fix OOPS when build_sched_domains percpu allocation fails
    • msm: audio: qdsp6v3: Add size safety check to ACDB driver
    • msm_serial_hs: Set the driver data in the probe correctly
    • tick-sched: change the cpu that updates rq_stats
    • arm: irq: Correct set_irq_flags check for invalid irq
    • msm: pil-dsps: Assert peripheral reset in addition to proc reset
    • arm: irq: Remove check for hardirq mask size
    • mfd: pm8xxx-misc: Fix pm8xxx_smpl_control so that reset on SMPL works
    • arm: Allow saving of stacktraces from other processes
    • msm: pil: Synchronize request_firmware() with suspend
    • ASoC: core: avoid scheduling delay work
    • fs: fat: rate limit the kernel messages
    • lib: genalloc: Change chunk allocation to vmalloc
    • PM / Sleep: Do not check wakeup too often in try_to_freeze_tasks()
    • msm: rpm: Replace mutex_lock_interruptible with mutex_lock
    • Patch: Linux Kernel to 3.0.101 (end of life)
    • Sweep2wake: Disable some debug messages
    • Sweep2Wake: Redefine some functions
    • touchscreen: reduce log spam of atmel driver and a small touch up
    • touchscreen: atmel: AOSP multitouch fix
    • Revert "drivers: net: wireless: bcmdhd: Update to aosp-common-3.0"


    If you any issues please make a clean install before reporting !

    DOWNLOAD : HERE MD5: f5ba7fc1c3279c212af224a0d5f7c219

    MIRROR
{ 17 October }

  • Cm updates from upstream (as of today at 11:00) : here

    Rom:
    • Set default number of background apps to 15
    • Android updated to 4.3.1



    Kernel:
    • Make tun module built-in
    • Patch: Linux Kernel to 3.0.100
    • Remove sweep2wake for now (causes BSODs)
    • Memory remap by sultanxda, we now have 867 MB of RAM
    • msm: smd_pkt: Handle wakelocks appropriately to optimize power usage
    • Bcmdhd: Set PM_FAST during screen off
    • Patch: Linux Kernel to 3.0.99


    If you any issues please make a clean install before reporting !

    DOWNLOAD : HERE MD5: 8147059a0ac0422b641b00e8183a57ed

    MIRROR

{ 05 October }

  • Cm updates from upstream (as of today at 15:00) : here

    Rom:
    • Fix music hiccups during screen off
    • Enable camera hardware button as customizable



    Kernel:
    • bluetooth: backport from caf-msm-jb_3.2.1
    • Enable sync driver
    • misc: uidstat: avoid create_stat() race and blockage.
    • Patch: Linux kernel to 3.0.98
    • drivers: usb: gadget: Backport from caf-jb_mr1_chocolate


    If you any issues please make a clean install before reporting !

    DOWNLOAD : HERE MD5: d5e028b5bad24bf5bc5bccb79a2156f8

    MIRROR

{ 29 September }

  • Cm updates from upstream (as of today at 22:00) : here

    Rom:
    • Fix viber calls
    • Feature: Add support for touch to focus during video recording(sultanxda)



    Kernel:
    • shooteru: Switch to autosmp by mrg666
    • add msm_autosmp from MiRaGe mako kernel (replaces mpdecision)
    • touchscreen: atmel: AOSP multitouch fix
    • Patch: Linux Kernel to 3.0.97
    • drivers: net: wireless: bcmdhd: Update to aosp-common-3.0


    If you any issues please make a clean install before reporting !

    DOWNLOAD : HERE MD5: d1b790113aaaea0dead9fad7c1166f07

    MIRROR
{ 26 September }

  • Cm updates from upstream (as of today at 14:00) : here

    Rom:




    Kernel:
    • lowmemorykiller: make default lowmemorykiller debug message useful
    • android: lowmemorykiller: add lmk parameters tunning code.
    • android/lowmemorykiller: Ignore tasks with freed mm
    • android/lowmemorykiller: Wait for memory to be freed
    • android/lowmemorykiller: Check all tasks for death pending
    • Enable & update ondemand gov (mrg666)
    • shooteru: Import sweep2wake
    • video: msm: fix video recording crashes disable the debug routine vfe31_do_workqueue which was causing the crash
    • shooter(u): Align framebuffers
    • msm: Camera: clear control queue
    • msm: camera: Remove additional check in msm_queue_drain
    • pm8xxx-vibrator: exposed sysfs to modify voltage level
    • shooteru: tty: serial: bcm: add lpm support
    • netfilter: xt_qtaguid: update to fix network traffic indicators
    • shooteru: Enable dynamic buttons brightness


    If you any issues please make a clean install before reporting !

    DOWNLOAD : HERE MD5: fe7cdffa7361b0f14c29855caa234e4e

    MIRROR


{ 20 September }

  • Cm updates from upstream (as of today at 18:00) : here

    Rom:
    • Focal removed ( no longer supported in CM )



    Kernel:
    • Rom is now powered by MiRaGe Kernel - 10x @mrg666

    KERNEL FIX FOR VIDEO RECORDING

    If you any issues please make a clean install before reporting !

    DOWNLOAD : HERE MD5: 1eb6e1c48641d334d5446a1a08e5a974

    MIRROR


{ 16 September }

  • Cm updates from upstream (as of today at 14:00) : here

    Rom:
    • Disable Dalvik log spam
    • BSOD should happend less often
    • Rom now includes CM Device Manager
    • Added a kernel init.d script - for customizations ( you will find it in system/etc/init.d/99golanx ) mount system RW, and edit it with a root explorer.
    • Hide unsupported recording resolutions



    Clean install recommended ! ! !



    Kernel:
    • workqueue: cond_resched() after processing each work item
    • msm_mpdecision: use mrg666's variant
    • msm_rq_stats: backport from CAF msm-3.4 kernel
    • Revert "lowmemorykiller: Voku and Dorimanx tweaks for LMK"
    • lib/int_sqrt.c: optimize square root algorithm
    • tmpfs: enable NOSEC optimization
    • qdsp6v3: Rename speaker_mono_rx to speaker_rx so it can initialize
    • Patch: Linux kernel to 3.0.96
    • Patch: Linux kernel to 3.0.95
    • msm: msm_bus: Fix the check for gateway fabrics
    • msm: scm-pas: Migrate to clk_prepare/unprepare() APIs
    • rpc_pmmap: Add support for 255 levels of backlight control using PWM
    • smd_tty: update to caf/jb2.5.1
    • smd_pkt: update to caf/jb2.5.1
    • msm: smd: fix packet polling race condition
    • msm: smsm: Use interrupt mask for local SMSM notifications
    • msm: smd: Export SMD initialization function
    • msm: smd: add packet checking API
    • msm: smd: call smem_find() after releasing spinlocks
    • netfilter: xt_qtaguid: Allow tracking loopback
    • Revert "Add Dynamic read-ahead"
    • msm: cpufreq: boost freq of online cpu(s) to max on resume
    • cpufreq: interactive: fix show_target_loads and show_above_hispeed_delay
    • Let's give the kernel a name :D Meet -=GolanX Kernel=-

    If you any issues please make a clean install before reporting !

    DOWNLOAD : HERE MD5: bcde674370bb5f99ff5ac65d4d700ff4

    MIRROR
{ 03 September }

  • Cm updates from upstream (as of today at 12:00) : here

    Rom:
    • Hide 1080p recording ( not supported )
    • Enable variable brightness for capacitive buttons ( below 20% button lights are off )
    • Update liblights to support userspace control
    • Added vibrator control ( slider preview doesn't reflect the real value )
    • Disabled touch-to-focus during recording, so it doesn't freeze anymore


    Kernel:
    • Add PR_{GET,SET}_NO_NEW_PRIVS to prevent execve from granting privs
    • USB: dynamically allocate usb_device children pointers
    • misc: uidstat: avoid create_stat() race and blockage.
    • netfilter: xt_qtaguid: update to fix network traffic indicators
    • Enable control over vibrator power
    • Patch: Linux kernel to 3.0.94

    If you any issues please make a clean install before reporting !

    DOWNLOAD : HERE MD5: 143a53fa86d1e124e390ea3aa0b59b8a
{ 25 August }

  • Cm updates from upstream (as of today at 10:00) : here

    Rom:
    • Added hdmid binary ( needs testing )
    • CameraWrapper: enabled scene detect, set horizontal and veritical view angles as in sense CAM
    • Disable ARM PIE ( fixes exposure problems )
    • Android updated to android-4.3_r2.2 (JSS15Q)


    Kernel:
    • "Revert "Kernel camera fix." ( fixes exposure problems )
    • Bluetooth: Fix for the l2cap layer crashes while turning OFF BT
    • Patch: Linux Kernel to 3.0.92-3.0.93

    DOWNLOAD : HERE MD5: d7001bfafbc8131a93cd6873e281d5ed

{ 19 August }

  • Cm updates from upstream (as of today at 21:00) : here

    Rom:
    • Data drops should be fixed
    • Torch fixed


    Kernel:
    • Patch: Linux Kernel to 3.0.90-3.0.91

    DOWNLOAD : HERE MD5: 39930e31686fe00d7fb16a94e8700e52

{ 13 August }

  • Cm updates from upstream (as of yesterday at 19:00) : here

    Rom:
    • Camera fixed (dastin)
    • CamCorder fixed (dastin)
    • Updates will released through CMUpdater also


    Kernel:
    • shooteru: lower display panel voltages
    • ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page
    • ARM: 7791/1: a.out: remove partial a.out support
    • ARM: 7803/1: Fix deadlock scenario with smp_send_stop()
    • writeback: Fix occasional slow sync(1)
    • msm: msm_fb: remove mmio access through mmap
    • Staging: android: timed_gpio: Fix unreg order
    • msm: msm_fb: remove mmio access through mmap
    • Staging: android: timed_gpio: Fix unreg order

    DOWNLOAD : HERE MD5: aa9c2b60f920b2f5e9b450c3f2e81039

{ 11 August }

  • Cm updates from upstream (as of last night at 23:00) : here

    Initial release

    DOWNLOAD : HERE MD5: d8d3a394ee169d6fc0839d9d95e183ed

MIRROR goo.im : HERE

GAPPS for 4.3

REPO with kernel source: https://github.com/johnnyslt/android_kernel_htc_msm8660
Device specific repos: https://github.com/johnnyslt
Kernel compiled with THIS TOOLCHAIN

beer.gif
 
Last edited:

johnnyslt

Inactive Recognized Developer
Sep 10, 2010
1,381
6,262
Bucharest
How to get logs :

LOGCAT:
from windows cmd or linux terminal ( must have android SDK installed )

1. adb shell
2. logcat > sdcard/logcat.txt


or from terminal on phone :

1.su
2. logcat > sdcard/logcat.txt


DMESG:
from windows cmd or linux terminal ( must have android SDK installed )

1. adb shell
2. dmesg > sdcard/dmesg.txt


or from terminal on phone :

1.su
2. dmesg > sdcard/dmesg.txt


LAST_KMSG:
from windows cmd or linux terminal ( must have android SDK installed )

1. adb shell
2. cat proc/last_kmsg > sdcard/last_kmsg.txt


or from terminal on phone :

1.su
2. cat proc/last_kmsg > sdcard/last_kmsg.txt


beer.gif
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 97
    CyanogenMod 10.2 - Android 4.3.1 - Jellybean - Unofficial



    THWtPYr.jpg


    CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3.1 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.

    Code:
    #include 
    /*
    * Your warranty is now void.
    *
    * We are not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at us for messing up your device, we will laugh at you.
    */

    FEATURES:
    • Built from CM source
      [*]MiRaGe Kernel compiled from source ( 10x @mrg666 )
      [*]Kernel overclockable up to 1728 Mhz
      [*]Service
      [*]Text
      [*]Data
      [*]Calls
      [*]Audio
      [*]WiFi
      [*]Bluetooth
      [*]Google Now
      [*]GPS
      [*]MMS
      [*]VoIP
      [*]Latest Mako Qualcomm JB libs & firmware
      [*]Video playback
      [*]Audio playback
      [*]Camera
      [*]Camcorder
      [*]Tethering ( WIFI, USB & BT)
      [*]Control over button backlight power ( Settings > Buttons > Backlight )
      [*]Change button backlight timeout ( Settings > Buttons > Backlight )
      [*]Control over haptic feedback power ( Settings > More options > Vibrator intensity )
      [*]Sweep2Wake




    BUGS / NOT WORKING:


    • 3D recording not working
      [*]Ocazional data drops.
      [*]In-call volume sometimes gets reseted to maximum. Temporary fix:ENABLE TOUCH SOUNDS
      [*]Camcorder: When recording video, sometimes first video will not work, the second one should be OK.
      [*]Sending MMS's might not work for everybody (receiving works) !
      [*]Bluetooth tethering might not work from the first time



    SCREENSHOTS:
    1eVMq.png
    1eVMt.png
    1eVMw.png
    1eVMz.png
    1eVME.png
    1eVFy.png



    RECOMANDATION:

    • Do not use superwipes
      [*]Required HBOOT : 1.49.xxxx
      [*]S-OFF
      [*]Radio/baseband : 11.77.3504.00P_11.25.3504.06_M get it from HERE
      [*]4ext recovery


    If you have spontaneous reboots, check that you have the required radio version in BOOTLOADER not in SETTINGS -> ABOUT PHONE

    Follow these exact steps to install the ROM :

    If coming from an other ROM do this :

    • 1. Wipe data, cache, and system (wipe all partitions except sdcard if on 4ext recovery) if coming from any other ROM
    • 2. Flash ROM
    • 3. Flash GAPPS
    • 4. Reboot
    • 5. ???
    • 6. Profit

    If coming from previous build of CM10.2 to this :

    • 1. Wipe cache and dalvik-cache
    • 2. Flash ROM
    • 3. Flash GAPPS
    • 4. Reboot
    • 5. ???
    • 6. Profit


    • To enable Developer Options and Performance go to Settings > About Phone and repeatedly press Build Number.
    • If you have a problem with ADB, update your android-sdk to latest version.
    • To enable Advanced reboot menu got Settings > Developer Options > check Advanced reboot




    Thanks to:

    • Agrabren
      [*]Dastin1015
      [*]mrg666
      [*]sultanxda
      [*]Everyone who contributes to CM as this is based on their hard work!
      [*]Helicopter88
      [*]LaidbackNikez
      [*]sjoerd0301
      [*]Bigwillyg
      [*]Evervolv Team
      [*]GOO.IM TEAM




    Issues tracker:

    Please use this issues tracker HERE, if you want to help fixing bugs.
    Logs are needed (logcat / dmesg / last_kmsg / screenshots), not just "got FC", "it's not working", "+1" or useless replies.


    beer.gif
    47
    CHANGELOG & DOWNLOAD :

    { 04 February }

    • Cm updates from upstream (as of today at 10:00) : here

      Kernel:

      CLEAN INSTALL RECOMMENDED ! ! ! if you have any problems...

      DOWNLOAD : HERE MD5: bacaf09f329072ddbe8a7138f4584a05

      MIRROR

    Older releases:


    { 27 December }

    • Cm updates from upstream (as of today at 13:00) : here

      Rom:
      • Rom is now half PMEM and half ION (10x: blefish, sultanxda, paulb-nb)
      • No more graphical glitches in Maps app (because of ION)
      • Added support for f2fs
      • Upstream CM-10.2 changes



      Kernel:
      • Kernel now has a hybrid memory allocation (ION for display, PMEM for camera) (10x: blefish, sultanxda, paulb-nb)
      • Available RAM is 812MB (credit: sultanxda)
      • Enabled SELinux support


      CLEAN INSTALL RECOMMENDED ! ! !

      DOWNLOAD : HERE MD5: 4b101cd273c1ae51d8fa339def19e6a4

      MIRROR
      MIRROR 2
    { 10 November }

    • Cm updates from upstream (as of today at 23:00) : here

      Rom:
      • shooteru: disable HDMI services
      • Camera: Added auto-exposure settings



      Kernel:
      • ARM: entry: avoid enabling interrupts in prefetch/data (fixed reboots)
      • msm: spm: Allow setting of voltages across cpus


      If you any issues please make a clean install before reporting !

      DOWNLOAD : HERE MD5: afe572da8bf417285e86ca3a12dff31c

      MIRROR
      MIRROR 2


    { 27 October }

    • Cm updates from upstream (as of today at 11:00) : here

      Rom:
      • Update Torch overlay
      • Run qcom-post-boot script only once
      • Use a2dp tuning (min CPU freq set to 432Mhz during a2dp playback) - needs testing for fine tunning
      • Enable Bluetooth LE
      • Fix front cam switching
        [*] Added Facebook hack for contacts syncing
      • Viper4android dsp should be fixed
      • Added back Sweep2Wake support



      Kernel:
      • power: fbearlysuspend: add sleep hack for CRT-off animation
      • sched: fix OOPS when build_sched_domains percpu allocation fails
      • msm: audio: qdsp6v3: Add size safety check to ACDB driver
      • msm_serial_hs: Set the driver data in the probe correctly
      • tick-sched: change the cpu that updates rq_stats
      • arm: irq: Correct set_irq_flags check for invalid irq
      • msm: pil-dsps: Assert peripheral reset in addition to proc reset
      • arm: irq: Remove check for hardirq mask size
      • mfd: pm8xxx-misc: Fix pm8xxx_smpl_control so that reset on SMPL works
      • arm: Allow saving of stacktraces from other processes
      • msm: pil: Synchronize request_firmware() with suspend
      • ASoC: core: avoid scheduling delay work
      • fs: fat: rate limit the kernel messages
      • lib: genalloc: Change chunk allocation to vmalloc
      • PM / Sleep: Do not check wakeup too often in try_to_freeze_tasks()
      • msm: rpm: Replace mutex_lock_interruptible with mutex_lock
      • Patch: Linux Kernel to 3.0.101 (end of life)
      • Sweep2wake: Disable some debug messages
      • Sweep2Wake: Redefine some functions
      • touchscreen: reduce log spam of atmel driver and a small touch up
      • touchscreen: atmel: AOSP multitouch fix
      • Revert "drivers: net: wireless: bcmdhd: Update to aosp-common-3.0"


      If you any issues please make a clean install before reporting !

      DOWNLOAD : HERE MD5: f5ba7fc1c3279c212af224a0d5f7c219

      MIRROR
    { 17 October }

    • Cm updates from upstream (as of today at 11:00) : here

      Rom:
      • Set default number of background apps to 15
      • Android updated to 4.3.1



      Kernel:
      • Make tun module built-in
      • Patch: Linux Kernel to 3.0.100
      • Remove sweep2wake for now (causes BSODs)
      • Memory remap by sultanxda, we now have 867 MB of RAM
      • msm: smd_pkt: Handle wakelocks appropriately to optimize power usage
      • Bcmdhd: Set PM_FAST during screen off
      • Patch: Linux Kernel to 3.0.99


      If you any issues please make a clean install before reporting !

      DOWNLOAD : HERE MD5: 8147059a0ac0422b641b00e8183a57ed

      MIRROR

    { 05 October }

    • Cm updates from upstream (as of today at 15:00) : here

      Rom:
      • Fix music hiccups during screen off
      • Enable camera hardware button as customizable



      Kernel:
      • bluetooth: backport from caf-msm-jb_3.2.1
      • Enable sync driver
      • misc: uidstat: avoid create_stat() race and blockage.
      • Patch: Linux kernel to 3.0.98
      • drivers: usb: gadget: Backport from caf-jb_mr1_chocolate


      If you any issues please make a clean install before reporting !

      DOWNLOAD : HERE MD5: d5e028b5bad24bf5bc5bccb79a2156f8

      MIRROR

    { 29 September }

    • Cm updates from upstream (as of today at 22:00) : here

      Rom:
      • Fix viber calls
      • Feature: Add support for touch to focus during video recording(sultanxda)



      Kernel:
      • shooteru: Switch to autosmp by mrg666
      • add msm_autosmp from MiRaGe mako kernel (replaces mpdecision)
      • touchscreen: atmel: AOSP multitouch fix
      • Patch: Linux Kernel to 3.0.97
      • drivers: net: wireless: bcmdhd: Update to aosp-common-3.0


      If you any issues please make a clean install before reporting !

      DOWNLOAD : HERE MD5: d1b790113aaaea0dead9fad7c1166f07

      MIRROR
    { 26 September }

    • Cm updates from upstream (as of today at 14:00) : here

      Rom:




      Kernel:
      • lowmemorykiller: make default lowmemorykiller debug message useful
      • android: lowmemorykiller: add lmk parameters tunning code.
      • android/lowmemorykiller: Ignore tasks with freed mm
      • android/lowmemorykiller: Wait for memory to be freed
      • android/lowmemorykiller: Check all tasks for death pending
      • Enable & update ondemand gov (mrg666)
      • shooteru: Import sweep2wake
      • video: msm: fix video recording crashes disable the debug routine vfe31_do_workqueue which was causing the crash
      • shooter(u): Align framebuffers
      • msm: Camera: clear control queue
      • msm: camera: Remove additional check in msm_queue_drain
      • pm8xxx-vibrator: exposed sysfs to modify voltage level
      • shooteru: tty: serial: bcm: add lpm support
      • netfilter: xt_qtaguid: update to fix network traffic indicators
      • shooteru: Enable dynamic buttons brightness


      If you any issues please make a clean install before reporting !

      DOWNLOAD : HERE MD5: fe7cdffa7361b0f14c29855caa234e4e

      MIRROR


    { 20 September }

    • Cm updates from upstream (as of today at 18:00) : here

      Rom:
      • Focal removed ( no longer supported in CM )



      Kernel:
      • Rom is now powered by MiRaGe Kernel - 10x @mrg666

      KERNEL FIX FOR VIDEO RECORDING

      If you any issues please make a clean install before reporting !

      DOWNLOAD : HERE MD5: 1eb6e1c48641d334d5446a1a08e5a974

      MIRROR


    { 16 September }

    • Cm updates from upstream (as of today at 14:00) : here

      Rom:
      • Disable Dalvik log spam
      • BSOD should happend less often
      • Rom now includes CM Device Manager
      • Added a kernel init.d script - for customizations ( you will find it in system/etc/init.d/99golanx ) mount system RW, and edit it with a root explorer.
      • Hide unsupported recording resolutions



      Clean install recommended ! ! !



      Kernel:
      • workqueue: cond_resched() after processing each work item
      • msm_mpdecision: use mrg666's variant
      • msm_rq_stats: backport from CAF msm-3.4 kernel
      • Revert "lowmemorykiller: Voku and Dorimanx tweaks for LMK"
      • lib/int_sqrt.c: optimize square root algorithm
      • tmpfs: enable NOSEC optimization
      • qdsp6v3: Rename speaker_mono_rx to speaker_rx so it can initialize
      • Patch: Linux kernel to 3.0.96
      • Patch: Linux kernel to 3.0.95
      • msm: msm_bus: Fix the check for gateway fabrics
      • msm: scm-pas: Migrate to clk_prepare/unprepare() APIs
      • rpc_pmmap: Add support for 255 levels of backlight control using PWM
      • smd_tty: update to caf/jb2.5.1
      • smd_pkt: update to caf/jb2.5.1
      • msm: smd: fix packet polling race condition
      • msm: smsm: Use interrupt mask for local SMSM notifications
      • msm: smd: Export SMD initialization function
      • msm: smd: add packet checking API
      • msm: smd: call smem_find() after releasing spinlocks
      • netfilter: xt_qtaguid: Allow tracking loopback
      • Revert "Add Dynamic read-ahead"
      • msm: cpufreq: boost freq of online cpu(s) to max on resume
      • cpufreq: interactive: fix show_target_loads and show_above_hispeed_delay
      • Let's give the kernel a name :D Meet -=GolanX Kernel=-

      If you any issues please make a clean install before reporting !

      DOWNLOAD : HERE MD5: bcde674370bb5f99ff5ac65d4d700ff4

      MIRROR
    { 03 September }

    • Cm updates from upstream (as of today at 12:00) : here

      Rom:
      • Hide 1080p recording ( not supported )
      • Enable variable brightness for capacitive buttons ( below 20% button lights are off )
      • Update liblights to support userspace control
      • Added vibrator control ( slider preview doesn't reflect the real value )
      • Disabled touch-to-focus during recording, so it doesn't freeze anymore


      Kernel:
      • Add PR_{GET,SET}_NO_NEW_PRIVS to prevent execve from granting privs
      • USB: dynamically allocate usb_device children pointers
      • misc: uidstat: avoid create_stat() race and blockage.
      • netfilter: xt_qtaguid: update to fix network traffic indicators
      • Enable control over vibrator power
      • Patch: Linux kernel to 3.0.94

      If you any issues please make a clean install before reporting !

      DOWNLOAD : HERE MD5: 143a53fa86d1e124e390ea3aa0b59b8a
    { 25 August }

    • Cm updates from upstream (as of today at 10:00) : here

      Rom:
      • Added hdmid binary ( needs testing )
      • CameraWrapper: enabled scene detect, set horizontal and veritical view angles as in sense CAM
      • Disable ARM PIE ( fixes exposure problems )
      • Android updated to android-4.3_r2.2 (JSS15Q)


      Kernel:
      • "Revert "Kernel camera fix." ( fixes exposure problems )
      • Bluetooth: Fix for the l2cap layer crashes while turning OFF BT
      • Patch: Linux Kernel to 3.0.92-3.0.93

      DOWNLOAD : HERE MD5: d7001bfafbc8131a93cd6873e281d5ed

    { 19 August }

    • Cm updates from upstream (as of today at 21:00) : here

      Rom:
      • Data drops should be fixed
      • Torch fixed


      Kernel:
      • Patch: Linux Kernel to 3.0.90-3.0.91

      DOWNLOAD : HERE MD5: 39930e31686fe00d7fb16a94e8700e52

    { 13 August }

    • Cm updates from upstream (as of yesterday at 19:00) : here

      Rom:
      • Camera fixed (dastin)
      • CamCorder fixed (dastin)
      • Updates will released through CMUpdater also


      Kernel:
      • shooteru: lower display panel voltages
      • ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page
      • ARM: 7791/1: a.out: remove partial a.out support
      • ARM: 7803/1: Fix deadlock scenario with smp_send_stop()
      • writeback: Fix occasional slow sync(1)
      • msm: msm_fb: remove mmio access through mmap
      • Staging: android: timed_gpio: Fix unreg order
      • msm: msm_fb: remove mmio access through mmap
      • Staging: android: timed_gpio: Fix unreg order

      DOWNLOAD : HERE MD5: aa9c2b60f920b2f5e9b450c3f2e81039

    { 11 August }

    • Cm updates from upstream (as of last night at 23:00) : here

      Initial release

      DOWNLOAD : HERE MD5: d8d3a394ee169d6fc0839d9d95e183ed

    MIRROR goo.im : HERE

    GAPPS for 4.3

    REPO with kernel source: https://github.com/johnnyslt/android_kernel_htc_msm8660
    Device specific repos: https://github.com/johnnyslt
    Kernel compiled with THIS TOOLCHAIN

    beer.gif
    35
    :victory:
    1kdMU.png


    Broken so far:

    RADIO
    SDCARD
    CAMERA
    AUDIO

    Hacked recovery is not necessary anymore.

    Back to work now... :D
    34
    New KitKat build: http://d-h.st/oTN

    • phone can now be booted with sim card
    • Call work,
    • sms works
    • wifi works,
    • gps, works.
    • audio mostly works, but there still some issues with it.
    • browser is "blacked out".
    26
    New CM-10.2 build uploaded ! ! !


    I haven't had the time to check the Skype bug.

    Bluetooth tethering seems to be working :D, I guess it was broken from CM


    The attached kernel contains sultanxda memory remap(848 Mb) which should be stable, I'll leave it here if anyone wants it.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone